Require that there is a valid layout with a valid number of channels
before accepting nb_elems.
The value is required when flushing.
Thanks to kasper93 for figuring it out.
The issue is that AOT 45 isn't defined anywhere, and looking at the git
blame, it seems to have sprung up through a reordering of the enum,
and adding a hole.
The spec does not define an explicit AOT for SBR and no SBR, and only
uses AOT 42 (previously AOT_USAC_NOSBR), so just rename AOT_USAC to
it and replace its use everywhere.
issue found while reviewing CID1452612 Free of array-typed value
Sponsored-by: Sovereign Tech Fund
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Found by reviewing code related to CID1500301 String not null terminated
Sponsored-by: Sovereign Tech Fund
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes overflow check for bit_rate multiplication few lines below.
Found by OSS-Fuzz.
Signed-off-by: Kacper Michajłow <kasper93@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Yes the same dead code is in "iLBC Speech Coder ANSI-C Source Code"
Fixes: CID1509370 Logically dead code
Sponsored-by: Sovereign Tech Fund
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Actually, the jaccard distance is defined as D = 1 - intersect / union.
Additionally, the distance value is compared against a constant that
must be between 0 and 1, which is not the case here. Both facts together
has led to the fact, that the function always returned a matching course
signature. To leave the constant intact and to avoid floating point
computation, this commit multiplies with 1 << 16 making the constant
effectively 9000 / (1<<16) =~ 0.14.
Reported-by: Sachin Tilloo <sachin.tilloo@gmail.com>
Reviewed-by: Sachin Tilloo <sachin.tilloo@gmail.com>
Tested-by: Sachin Tilloo <sachin.tilloo@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
T-Head C908 (cycles):
vc1dsp.vc1_inv_trans_4x4_c: 310.7
vc1dsp.vc1_inv_trans_4x4_rvv_i32: 120.0
We could use 1 `vlseg4e64.v` instead of 4 `vle16.v`, but that seems to
be about 7% slower.
The OS may silently fix (emulate) unaligned hardware access exceptions.
This is extremely slow and code should be fixed not to rely on unaligned
access on affected hardware. Accordingly this requests that the OS
disable emulation and instead throw Bus error, which will be caught by
checkasm's signal handler.
This has no effects if the hardware supports unaligned access in
hardware, since no exceptions are generated. prctl() will fail safe in
that case.
There is no bsf for other codecs to modify crop info except H.265.
For H.265, the assumption that FFALIGN(width, 16)xFFALIGN(height, 16)
is the video resolution can be wrong, since the encoder can use CTU
larger than 16x16. In that case, use FFALIGN(width, 16) - width
as crop_right is incorrect. So disable the workaround for H.265 now.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
It's a common usecase to request a video size after crop. Before
this patch, user must know the video size before crop, then set
crop_right/crop_bottom accordingly. Since HEVC can have different
CTU size, it's not easy to get/deduce the video size before crop.
With the new width/height options, there is no such requirement.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
The line width 8 is supposed to test corner case, while the
performance doesn't matter. Width 1080 is also a case of
unaligned to 16.
Width 1920 meant for benchmark (together with --runs options).
Signed-off-by: James Almer <jamrial@gmail.com>
This is almost the same story as vp7_idct_add4y. We just have to use
strided loads of 2 64-bit elements to account for the different data
layout in memory.
T-Head C908:
vp7_idct_dc_add4uv_c: 7.5
vp7_idct_dc_add4uv_rvv_i64: 2.0
vp8_idct_dc_add4uv_c: 6.2
vp8_idct_dc_add4uv_rvv_i32: 2.2 (before)
vp8_idct_dc_add4uv_rvv_i64: 2.0
SpacemiT X60:
vp7_idct_dc_add4uv_c: 6.7
vp7_idct_dc_add4uv_rvv_i64: 2.2
vp8_idct_dc_add4uv_c: 5.7
vp8_idct_dc_add4uv_rvv_i32: 2.5 (before)
vp8_idct_dc_add4uv_rvv_i64: 2.0
DCT-related FFmpeg functions often add an unsigned 8-bit sample to a
signed 16-bit coefficient, then clip the result back to an unsigned
8-bit value. RISC-V has no signed 16-bit to unsigned 8-bit clip, so
instead our most common sequence is:
VWADDU.WV
set SEW to 16 bits
VMAX.VV zero # clip negative values to 0
set SEW to 8 bits
VNCLIPU.WI # clip values over 255 to 255 and narrow
Here we use a different sequence which does not require toggling the
vector type. This assumes that the wide addend vector is biased by
-128:
VWADDU.WV
VNCLIP.WI # clip values to signed 8-bit and narrow
VXOR.VX 0x80 # flip sign bit (convert signed to unsigned)
Also the VMAX is effectively replaced by a VXOR of half-width. In this
function, this comes for free as we anyway add a constant to the wide
vector in the prologue.
On C908, this has no observable effects. On X60, this improves
microbenchmarks by about 20%.
As with idct_dc_add, most of the code is shared with, and replaces, the
previous VP8 function. To improve performance, we break down the 16x4
matrix into 4 rows, rather than 4 squares. Thus strided loads and
stores are avoided, and the 4 DC calculations are vectored.
Unfortunately this requires a vector gather to splat the DC values, but
overall this is still a win for performance:
T-Head C908:
vp7_idct_dc_add4y_c: 7.2
vp7_idct_dc_add4y_rvv_i32: 2.2
vp8_idct_dc_add4y_c: 6.2
vp8_idct_dc_add4y_rvv_i32: 2.2 (before)
vp8_idct_dc_add4y_rvv_i32: 1.7
SpacemiT X60:
vp7_idct_dc_add4y_c: 6.2
vp7_idct_dc_add4y_rvv_i32: 2.0
vp8_idct_dc_add4y_c: 5.5
vp8_idct_dc_add4y_rvv_i32: 2.5 (before)
vp8_idct_dc_add4y_rvv_i32: 1.7
I also tried to provision the DC values using indexed loads. It ends up
slower overall, especially for VP7, as we then have to compute 16 DC's
instead of just 4.
This just computes the direct coefficient and hands over to code shared
with VP8. Accordingly the bulk of changes are just rewriting the VP8
code to share.
Nothing to write home about:
vp7_idct_dc_add_c: 1.7
vp7_idct_dc_add_rvv_i32: 1.2
Allocations in the following lines depend on the pixel shift, and so
these buffers must be reallocated if the pixel shift changes. Patch
fixes segmentation faults in fuzzed bitstreams.
Signed-off-by: Frank Plowman <post@frankplowman.com>
