This commit fixes issue with missing SPS/PPS headers in video
encoded by AMF AV1 encoder.
Missing headers leads to broken seek in MPV video player.
Default value for property AV1_HEADER_INSERTION_MODE shouldn't be setup
to NONE (no headers insertion). We need to skip definition of this property,
because default value depends on USAGE property.
Signed-off-by: Dmitrii Ovchinnikov <ovchinnikov.dmitrii@gmail.com>
With 5 accumulator vectors and 6 inputs, this can only use LMUL=2.
Also the number of vector loop iterations is small, just 5 on 128-bit
vector hardware.
The vector loop is somewhat unusual in that it processes data in
descending memory order, in order to save on vector slides:
in descending order, we can extract elements to carry over to the next
iteration from the bottom of the vectors directly. With ascending order
(see in the Opus postfilter function), there are no ways to get the top
elements directly. On the downside, this requires the use of separate
shift and sub (the would-be SH3SUB instruction does not exist), with
a small pipeline stall on the vector load address.
The edge cases in scalar are done in scalar as this saves on loads
and remains significantly faster than C.
autocorrelate_c: 669.2
autocorrelate_rvv_f32: 421.0
Given the size of the data set, strided memory accesses cannot be avoided.
We can still do better than the current code.
ps_hybrid_synthesis_deint_c: 12065.5
ps_hybrid_synthesis_deint_rvv_i32: 13650.2 (before)
ps_hybrid_synthesis_deint_rvv_i64: 8181.0 (after)
Segmented loads may be slower than not. So this advantageously uses a
unit-strided load and narrowing shifts instead.
Before:
ps_add_squares_c: 60757.7
ps_add_squares_rvv_f32: 22242.5
After:
ps_add_squares_c: 60516.0
ps_add_squares_rvv_i64: 17067.7
Fixes: Erroneous HTTP POST instead of HTTP PUT for WebVTT HLS variant playlists.
Signed-off-by: Léon Spaans <leons@gridpoint.nl>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Fixes: index -1 out of bounds for type 'CFrameBuffer [100]'
Fixes: 63877/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_FOURXM_fuzzer-5854263397711872
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
PGMYUV seems to be always limited range. This was a format originally
invented by FFmpeg at a time when YUVJ distinguished limited from full
range YUV, and this codec never appeared to output YUVJ in any
circumstance, so hard-coding limited range preserves the status quo.
The other formats are explicitly documented to be full range RGB/gray
formats. That said, don't tag them yet, due to outstanding bugs w.r.t
grayscale formats and color range handling.
This change in behavior updates a bunch of FATE tests in trivial ways
(added tagging being the only difference).
When using vf_scale to force a specific output color space, also tag
this on the AVFrame. (Mirroring existing logic for output range)
Move the sanity fix for RGB after the new assignment, to avoid leaking
bogus YUV colorspace metadata for RGB spaces.
No need to write a custom string parser when we can just use an integer
option with preset values. The various bits of fallback logic are wholly
redundant with equivalent logic already inside sws_getCoefficients.
Note: I disallowed setting 'out_color_matrix=auto', because this does
not do anything meaningful in the current code (just hard-codes
AVCOL_SPC_BT470BG fallback).
The documentation states that invalid entries default to SWS_CS_DEFAULT.
A value of 0 is not a valid SWS_CS_*, yet the code incorrectly
hard-codes it to BT.709 coefficients instead of SWS_CS_DEFAULT.
This was a complete hack seemingly designed to work around a different
bug, which was fixed in the previous commit. As such, there is no more
reason not to do this, as it simply breaks changing color range in
sws_setColorspaceDetails for no reason.
More commonly, this fixes the case of sws_setColorspaceDetails after
sws_getContext, since the latter implies sws_init_context.
The problem here is that sws_init_context sets up the range conversion
and fast path tables based on the values of srcRange/dstRange at init
time. This may result in locking in a "wrong" path (either using
unscaled fast path when range conversion later required, or using
scaled slow path when range conversion becomes no longer required).
There are two way outs:
1. Always initialize range conversion and unscaled converters, even if
they will be unused, and extend the runtime check.
2. Re-do initialization if the values change after
sws_setColorspaceDetails.
I opted for approach 1 because it was simpler and easier to reason
about.
Reword the av_log message to make it clear that this special converter
is not necessarily used, depending on whether or not there is range
conversion or YUV matrix conversion going on.
The check if drawing needs to be initialized and supported formats
should be drawable ones was flawed, as pad_stop/pad_start is only
populated from stop_duration/start_duration after these checks.
To fix that, check the _duration variants as well and for better
readability and maintainability break the check out into its own
helper.
Fixes a regression from 86b252ea9dFix#10621
Signed-off-by: Anton Khirnov <anton@khirnov.net>
We calculated offsets as pairs, but addressed them in the shader
as single float values, while reading them as ivec2s.
Also removes unused code (was provisionally added if cooperative matrices
could be used, but that turned out to be impossible).
VK_KHR_PORTABILITY_ENUMERATION_EXTENSION_NAME is required on macOS,
and VK_INSTANCE_CREATE_ENUMERATE_PORTABILITY_BIT_KHR flag should
be set.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Texinfo 7.0 produces quite different HTML to Texinfo 6.8. Without
this change, enumerated option flags (i.e. Possible values of x
are...) render as white text on a white background with Texinfo 7.0
and are unreadable. This change removes a style for the selector
`.table .table` which causes the background to turn white for these
elements. As far as I can tell, it is not actually used anywhere in
files generated by Texinfo 6.8.
Signed-off-by: Frank Plowman <post@frankplowman.com>
Resolves trac ticket #10636 (http://trac.ffmpeg.org/ticket/10636).
Texinfo 7.0, released in November 2022, changed the names of various
functions. Compiling docs with Texinfo 7.0 resulted in warnings and
improperly formatted documentation. More old names appear to have
been removed in Texinfo 7.1, released October 2023, which causes docs
compilation to fail.
This commit addresses the issue by adding logic to switch between the old
and new function names depending on the Texinfo version. Texinfo 6.8
produces identical documentation before and after the patch.
CC
https://www.mail-archive.com/debian-bugs-dist@lists.debian.org/msg1938238.htmlhttps://bugs.gentoo.org/916104
Signed-off-by: Frank Plowman <post@frankplowman.com>
By intent, and in practice, the "active contributor" criterion applies
to the person authoring the commits, not the one pushing them into the
repository.
When operating on large blocks of data it's common to repeatedly use
an instruction on multiple registers. Using the REPX macro makes it
easy to quickly write dense code to achieve this without having to
explicitly duplicate the same instruction over and over.
For example,
REPX {paddw x, m4}, m0, m1, m2, m3
REPX {mova [r0+16*x], m5}, 0, 1, 2, 3
will expand to
paddw m0, m4
paddw m1, m4
paddw m2, m4
paddw m3, m4
mova [r0+16*0], m5
mova [r0+16*1], m5
mova [r0+16*2], m5
mova [r0+16*3], m5
Commit taken from x264:
6d10612ab0
Signed-off-by: Frank Plowman <post@frankplowman.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Partially fixes ticket #798
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Peter Ross <pross@xvid.org>
This uses a more traditional approach allowing up processing of up to
period minus two elements per iteration. This also allows the algorithm
to work for all and any vector length.
As the T-Head C908 device under test can load 16 elements loop, there is
unsurprisingly a little performance drop when the period is minimal and
the parallelism is capped at 13 elements:
Before:
postfilter_15_c: 21222.2
postfilter_15_rvv_f32: 22007.7
postfilter_512_c: 20189.7
postfilter_512_rvv_f32: 22004.2
postfilter_1022_c: 20189.7
postfilter_1022_rvv_f32: 22004.2
After:
postfilter_15_c: 20189.5
postfilter_15_rvv_f32: 7057.2
postfilter_512_c: 20189.5
postfilter_512_rvv_f32: 5667.2
postfilter_1022_c: 20192.7
postfilter_1022_rvv_f32: 5667.2
