This allows us to offer the same codec name that libav uses. We don't have
a special way to do aliases, so it's all a bit more verbose than you'd want
but such is life.
Signed-off-by: Philip Langdale <philipl@overt.org>
For the sake of compatibility, and because pretty much everything else in the
codebase calls it HEVC.
Signed-off-by: Philip Langdale <philipl@overt.org>
* commit 'b08caa87c35a768ec0abb16b1e99c3a85f1df28e':
nvenc: H264 and HEVC encoders
Conflicts:
Changelog
configure
libavcodec/Makefile
libavcodec/version.h
This implementation is merged under the name nvenc_b*
Merged-by: Michael Niedermayer <michaelni@gmx.at>
WebPAnimEncoder API is a combination of encoder (WebPEncoder) and muxer
(WebPMux). It performs several optimizations to make it more efficient
than the combination of WebPEncode() and native ffmpeg muxer.
When WebPAnimEncoder API is used:
- In the encoder layer: we use WebPAnimEncoderAdd() instead of
WebPEncode().
- The muxer layer: works like a raw muxer.
On the other hand, when WebPAnimEncoder API isn't available, the old code is
used as it is:
- In the codec layer: WebPEncode is used to encode each frame
- In the muxer layer: ffmpeg muxer is used
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Sufficiently new nvenc hardware (GM20x or later) has support for H.265
encoding. This works the same as the H.264 encoder except the
codec parameters are different.
Due to the fact that common codec parameters are not shareable, there's
quite a bit of conditional logic you'd wish we could do without, but
such is life.
Signed-off-by: Philip Langdale <philipl@overt.org>
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
* commit 'b21af32aed7e343f962753943e9f16baedfb1750':
lavc: Prefer x264 over openh264 if both libraries are available
See: ddae03f69b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Anshul Maheshwari <anshul.ffmpeg@gmail.com>
To test Closed caption use following command
ffmpeg -f lavfi -i "movie=input.ts[out0+subcc]" -map s output.srt
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Compared to existing, common opensource H264 encoders, this can be
useful since it has got a different license (BSD instead of GPL).
Performance- and qualitywise it is comparable to x264 in ultrafast
mode.
Hooking it up as an encoder in libavcodec also simplifies comparing
it against other common encoders.
This requires OpenH264 1.3 or newer. Since the OpenH264 API and ABI
changes frequently, only releases are supported.
To take advantage of the OpenH264 patent offer, the OpenH264 library
must not be redistributed, but downloaded at runtime at the end-user's
system.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure the default behaviour of using the internal encoder
stays the same regardless if libtwolame is enabled or not (as for
any external library).
This fixes fate-lavf-mpg if libav is built with libtwolame enabled.
CC: libav-stable@libav.org
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Based off the srt encoder. The following features are unimplemented:
- fonts, colors, sizes
- alignment and positioning
The rest works well. For example, use ffmpeg to convert subtitles into the .vtt format:
ffmpeg -i input.srt output.vtt
Signed-off-by: Aman Gupta <ffmpeg@tmm1.net>
Signed-off-by: Clément Bœsch <u@pkh.me>
* commit 'b70d7a4ac72d23f3448f3b08b770fdf5f57de222':
lavc: add a native Opus decoder.
Conflicts:
Changelog
configure
libavcodec/version.h
Fate tests pass with both avresample as well as swresample based opus decoder, but
are disabled (reference files are very large so i want to think a day or 2 about
if theres an alternative or if they could be avoided, they also dont match the
official samples)
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Initial implementation by Andrew D'Addesio <modchipv12@gmail.com> during
GSoC 2012.
Completion by Anton Khirnov <anton@khirnov.net>, sponsored by the
Mozilla Corporation.
Further contributions by:
Christophe Gisquet <christophe.gisquet@gmail.com>
Janne Grunau <janne-libav@jannau.net>
Luca Barbato <lu_zero@gentoo.org>
It leverages the new hwaccel 1.2 features:
- get_buffer2 is never called
- the internal context is automatically initialized/deinitialized
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '6f273093e54cba130f3ffde3d6433e74baa4ad89':
LucasArts SMUSH VIMA audio decoder
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/version.h
libavcodec/vima.c
This commit adds a AV_CODEC_ID_ADPCM_VIMA alias in addition to the previously
used AV_CODEC_ID_VIMA, as well as a AVCodec with name "adpcm_vima" in addition
to the previously used name "vima"
These changes are needed for compatibility with the renamed codec in libav
See: b18357326c and others
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Further performance improvements and security fixes by
Vittorio Giovara, Luca Barbato and Diego Biurrun.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Additional fixes and enhancements by Vittorio Giovara, Gonzalo Garramuno,
Nicolas George, Paul B Mahol and Michael Niedermayer.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This makes the USE_FLOATS == 0 available to the end user
More float optimizations can easily be added as well now
common code should be factored out into a common file once all
fixed point & floating point optimizations are done, this is to
avoid having to move code back and forth between files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavc: remove mp3_header_(de)compress bitstream filters
Conflicts:
Changelog
libavcodec/mp3_header_compress_bsf.c
libavcodec/mp3_header_decompress_bsf.c
The decompress filter is left in place for interoperability and support of
files that used the compress filter.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Originally written by Ronald S. Bultje <rsbultje@gmail.com> and
Clément Bœsch <u@pkh.me>
Further contributions by:
Anton Khirnov <anton@khirnov.net>
Diego Biurrun <diego@biurrun.de>
Luca Barbato <lu_zero@gentoo.org>
Martin Storsjö <martin@martin.st>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
XvMC has long ago been superseded by newer acceleration APIs, such as
VDPAU, and few downstreams still support it. Furthermore XvMC is not
implemented within the hwaccel framework, but requires its own specific
code in the MPEG-1/2 decoder, which is a maintenance burden.
Initially written by Guillaume Martres <smarter@ubuntu.com> as a GSoC
project. Further contributions by the OpenHEVC project and other
developers, namely:
Mickaël Raulet <mraulet@insa-rennes.fr>
Seppo Tomperi <seppo.tomperi@vtt.fi>
Gildas Cocherel <gildas.cocherel@laposte.net>
Khaled Jerbi <khaled_jerbi@yahoo.fr>
Wassim Hamidouche <wassim.hamidouche@insa-rennes.fr>
Vittorio Giovara <vittorio.giovara@gmail.com>
Jan Ekström <jeebjp@gmail.com>
Anton Khirnov <anton@khirnov.net>
Martin Storsjö <martin@martin.st>
Luca Barbato <lu_zero@gentoo.org>
Yusuke Nakamura <muken.the.vfrmaniac@gmail.com>
Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Diego Biurrun <diego@biurrun.de>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Initially written by Guillaume Martres <smarter@ubuntu.com> as a GSoC
project. Further contributions by the OpenHEVC project and other
developers, namely:
Mickaël Raulet <mraulet@insa-rennes.fr>
Seppo Tomperi <seppo.tomperi@vtt.fi>
Gildas Cocherel <gildas.cocherel@laposte.net>
Khaled Jerbi <khaled_jerbi@yahoo.fr>
Wassim Hamidouche <wassim.hamidouche@insa-rennes.fr>
Vittorio Giovara <vittorio.giovara@gmail.com>
Jan Ekström <jeebjp@gmail.com>
Anton Khirnov <anton@khirnov.net>
Martin Storsjö <martin@martin.st>
Luca Barbato <lu_zero@gentoo.org>
Yusuke Nakamura <muken.the.vfrmaniac@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Based on a patch by Wolfram Gloger <wmglo@dent.med.uni-muenchen.de>.
http://lists.ffmpeg.org/pipermail/ffmpeg-devel/2012-December/136677.html
The original patch was rebased by Tudor SUCIU <tudor.suciu@gmail.com>.
Lots of additional features and fixes are made by me.
Fixes ticket #2086.
Changes since last version:
- change default page to all pages
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit bf36dc50ea, reversing
changes made to b7fc2693c7.
Conflicts:
libavcodec/h264.c
Keeping support for the old VDPAU API has been requested by our VDPAU maintainer
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some fixes provided by Paul B Mahol <onemda@gmail.com>
and Michael Niedermayer <michaelni@gmx.at> and me.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
* qatar/master:
avcodec: Bump minor for JPEG 2000 decoder
JPEG 2000 decoder for DCinema
The mqc code is merged, the rest is added independent of
the existing jpeg2000 decoder and encoder.
Conflicts:
Changelog
doc/general.texi
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/mqc.c
libavcodec/mqc.h
libavcodec/mqcdec.c
libavcodec/version.h
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Based on the 2007 GSoC project from Kamil Nowosad <k.nowosad@students.mimuw.edu.pl>
Updated to current programming standards, style and many more small
fixes by Diego Biurrun <diego@biurrun.de>.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA
markup is muxed in a standalone .ass/.ssa file. This means the AVPacket
data starts with a "Dialogue:" string, followed by a timing information
(start and end of the event as string) and a trailing CRLF after each
line. One packet can contain several lines. We'll refer to this layout
as "SSA" or "SSA lines".
In matroska, this markup is not stored as such: it has no "Dialogue:"
prefix, it contains a ReadOrder field, the timing information is not in
the payload, and it doesn't contain the trailing CRLF. See [1] for more
info. We'll refer to this layout as "ASS".
Since we have only one common codec for both formats, the matroska
demuxer is constructing an AVPacket following the "SSA lines" format.
This causes several problems, so it was decided to change this into
clean ASS packets.
Some insight about what is changed or unchanged in this commit:
CODECS
------
- the decoding process still writes "SSA lines" markup inside the ass
fields of the subtitles rectangles (sub->rects[n]->ass), which is
still the current common way of representing decoded subtitles
markup. It is meant to change later.
- new ASS codec id: AV_CODEC_ID_ASS (which is different from the
legacy AV_CODEC_ID_SSA)
- lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of
"ass") for consistency with the codec id and allows to add a real
ass decoder. This ass decoder receives clean ASS lines (so it starts
with a ReadOrder, is followed by the Layer, etc). We make sure this
is decoded properly in a new ass-line rectangle of the decoded
subtitles (the ssa decoder OTOH is doing a simple straightforward
copy). Using the packet timing instead of data string makes sure the
ass-line now contains the appropriate timing.
- lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed
into "ssa" (instead of "ass") for consistency with the codec id, and
allows to add a real "ass" encoder.
One important thing about this encoder is that it only supports one
ass rectangle: we could have put several dialogue events in the
AVPacket (separated by a \0 for instance) but this would have cause
trouble for the muxer which needs not only the start time, but also
the duration: typically, you have merged events with the same start
time (stored in the AVPacket->pts) but a different duration. At the
moment, only the matroska do the merge with the SSA-line codec.
We will need to make sure all the decoders in the future can't add
more than one rectangle (and only one Dialogue line in it
obviously).
FORMATS
-------
- lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets.
In the case of ASS packets as input, it adds the timing based on the
AVPacket pts and duration, and mux it with "Dialogue:", trailing
CRLF, etc.
- lavf/assdec: unchanged; it currently still only outputs SSA-lines
packets.
- lavf/mkv: the demuxer can now output ASS packets without the need of
any "SSA-lines" reconstruction hack. It will become the default at
next libavformat bump, and the SSA support will be dropped from the
demuxer. The muxer can take ASS packets since it's muxed normally,
and still supports the old SSA packets. All the SSA support and
hacks in Matroska code will be dropped at next lavf bump.
[1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
Using the first names of authors sounds somewhat unprofessional
and might be considered offensive which is not intended.
The new names use the initials of the authors due to simplicity
and the possibility to apply it consistently without the need
to find political correct names for each future case where
alternative codecs might exist. Also its shorter ...
If someone has a better idea, like maybe 2 random letters
and people prefer it then iam happy to switch to that ...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The two types of packets (PCI and DSI) are passed untouched but combined by the new codec ID AV_CODEC_ID_DVD_NAV.
The first 980 bytes in the packet contain the PCI data. The next 1018 are the DSI data.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3f111804eb5c603a344706b84b7164cbf7b4e0df':
libvpx: make vp8 and vp9 selectable
libvpx: support vp9
nut: support vp9 tag
mkv: support vp9 tag
rtpdec: Make variables that should wrap unsigned
Conflicts:
configure
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/avcodec.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The function find_things() in configure is confused by component
registration calls as part of multiline macros defining combined
component registration. Coalesce those macros into one line to
work around the issue.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Note that the linebreaks text codec option (but not the feature) has
been removed; its main goal was to allow demuxers to configure the text
decoder (and not meant to be used by users), but the AVOption are not a
viable solution. This is solved differently in this commit.
PIX is an image file format that was used by the BRender 3d engine.
Signed-off-by: Aleksi Nurmi <aleksi.nurmi@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '14f031d7ecfabba0ef02776d4516aa3dcb7c40d8':
dv: use AVStream.index instead of abusing AVStream.id
lavfi: add ashowinfo filter
avcodec: Add a RFC 3389 comfort noise codec
lpc: Add a function for calculating reflection coefficients from samples
lpc: Add a function for calculating reflection coefficients from autocorrelation coefficients
lavr: document upper bound on number of output samples.
lavr: add general API usage doxy
indeo3: remove duplicate capabilities line.
fate: ac3: Add dependencies
Conflicts:
Changelog
doc/filters.texi
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/version.h
libavfilter/Makefile
libavfilter/af_ashowinfo.c
libavfilter/allfilters.c
libavfilter/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This isn't too useful as a normal codec, but can be used in
voip style applications. The decoder updates the noise
generator parameters when a packet is given to it for decoding,
but if called with an empty packet, it generates more noise
according to the last parameters.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '23aae62c2cb4504a09ceb8cd0cabc1c8b260f521':
alsdec: Check k used for rice decoder.
avfiltergraph: silence an uninitialized variable warning
xsubenc: reindent
lavc: replace AVCodecContext.encode with subtitle-specific callback
lavc: add const to private codec class initialization.
avconv: don't pass a bogus parameter to avfilter_graph_create_filter().
id3v2: strdup the genre name explicitly.
lavf/id3v2: do not export empty fields.
buffersrc: add const to the AVFrame* argument of av_buffersrc_write_frame()
lavfi: replace empty input/output lists with null pointers
Conflicts:
ffmpeg_filter.c
libavcodec/alsdec.c
libavcodec/dvdsubenc.c
libavcodec/utils.c
libavcodec/v210dec.h
libavfilter/af_channelsplit.c
libavfilter/avfiltergraph.c
libavfilter/buffersrc.c
libavfilter/src_movie.c
libavfilter/vf_ass.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
MSS1 and MSS2: set final pixel format after common stuff has been initialised
MSS2 decoder
configure: handle --disable-asm before check_deps
x86: Split inline and external assembly #ifdefs
configure: x86: Separate inline from standalone assembler capabilities
pktdumper: Use a custom define instead of PATH_MAX for buffers
pktdumper: Use av_strlcpy instead of strncpy
pktdumper: Use sizeof(variable) instead of the direct buffer length
Conflicts:
Changelog
configure
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/dct-test.c
libavcodec/imgconvert.c
libavcodec/mss12.c
libavcodec/version.h
libavfilter/x86/gradfun.c
libswscale/x86/yuv2rgb.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The cpia video decoder is intended to be used with the v4l2 demuxer.
There are some small changes to the v4l2 demuxer to support the
variable frame length of the format.
Fixes ticket #1537
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: Add FATE tests for the Ut Video encoder
lavc: add Ut Video encoder
mpegvideo_enc: remove stray duplicate line from 7f9aaa4
swscale: x86: fix #endif comments in rgb2rgb template file
avconv: mark more options as expert.
avconv: split printing "main options" into global and per-file.
avconv: refactor help printing.
Conflicts:
Changelog
ffmpeg_opt.c
ffserver.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The special cases in demuxers and decoders are a mess otherwise (and more
would be needed to support it fully)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Fix even more missing includes after the common.h removal
build: Factor out rangecoder dependencies to CONFIG_RANGECODER
build: Factor out error resilience dependencies to CONFIG_ERROR_RESILIENCE
x86: avcodec: Consistently name all init files
Add more missing includes after removing the implicit common.h
Add some more missing includes after removing the implicit common.h
Don't include common.h from avutil.h
rtmp: Automatically compute the hash for SWFVerification
Conflicts:
configure
doc/APIchanges
doc/examples/decoding_encoding.c
libavcodec/Makefile
libavcodec/assdec.c
libavcodec/audio_frame_queue.c
libavcodec/avpacket.c
libavcodec/dv_profile.c
libavcodec/dwt.c
libavcodec/libtheoraenc.c
libavcodec/rawdec.c
libavcodec/rv40dsp.c
libavcodec/tiff.c
libavcodec/tiffenc.c
libavcodec/v210dec.h
libavcodec/vc1dsp.c
libavcodec/x86/Makefile
libavfilter/asrc_anullsrc.c
libavfilter/avfilter.c
libavfilter/buffer.c
libavfilter/formats.c
libavfilter/vf_ass.c
libavfilter/vf_drawtext.c
libavfilter/vf_fade.c
libavfilter/vf_select.c
libavfilter/video.c
libavfilter/vsrc_testsrc.c
libavformat/version.h
libavutil/audioconvert.c
libavutil/error.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Unsurprisingly, if a timing-less subrip decoder is desireable, an
encoder is as well. With this in place, we can move on to remove
the use of the old encoder/decoder with embedded timing and move
all timing handling the (de)muxer where they belong.
Signed-off-by: Philip Langdale <philipl@overt.org>
After various discussions, we concluded that, amongst other things,
it made sense to have a separate subrip decoder that did not use
in-band timing information, and rather relied on the ffmpeg level
timing.
As this is 90% the same as the existing srt decoder, it's implemented
in the same file.
Signed-off-by: Philip Langdale <philipl@overt.org>
This change introduces a basic encoder for 3GPP Timed Text subtitles,
also known as TX3G, Quicktime subtitles, or "movtext" in the existing
code.
This initial change doesn't attempt to write styling information,
and just writes the plain text of the subtitles. I intend to add
support for styles eventually, but it's challenging due to a lack
of existing players that support them.
Note that an additional change is required to the mov/mp4 muxer to
write empty subtitle packets to indicate subtitle duration.
Signed-off-by: Philip Langdale <philipl@overt.org>
This change introduces a basic decoder for 3GPP Timed Text subtitles,
also known as TX3G, Quicktime subtitles, or "movtext" in the existing
code.
This initial change doesn't attempt to parse styling information,
and just reads the plain text of the subtitles. I intend to add
support for styles eventually, but it's challenging due to a lack
of existing players that support them.
Signed-off-by: Philip Langdale <philipl@overt.org>
* qatar/master:
build: Fix APE tag dependencies
MS Expression Encoder Screen decoder
libfdk-aac: Allow setting the encoder bandwidth/cutoff frequency
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/version.h
libavformat/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
build: Fix Ogg demuxer dependencies
build: Fix FLAC demuxer dependencies
flac: Move flac functions shared between libraries to flac common code
build: Fix CAF demuxer dependencies
build: Fix MP2 muxer dependencies
build: Add missing build rules for the ISMV muxer
configure: Drop redundant mxf_d10 test dependency declaration
Support AAC encoding via the external library fdk-aac
libavcodec: Add more AAC profiles
dct/fft-test: use a replacement getopt() if the system has none present.
Conflicts:
Changelog
libavcodec/Makefile
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
configure: Check for the math function rint
TechSmith Screen Codec 2 decoder
rtsp: Add listen mode
rtsp: Make rtsp_open_transport_ctx() non-static
rtsp: Move rtsp_read_close
rtsp: Parse the mode=receive/record parameter in transport lines
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/version.h
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
asfdec: read attached pictures.
apetag: reindent
apetag: export attached covers as video streams.
apetag: fix the amount of data read from binary tags.
apetag: make sure avio_get_str() doesn't read more than it should.
mov: read itunes cover art.
snow: remove VLA in mc_block()
intfloat: Don't use designated initializers in the public headers
snow: remove a VLA.
doc: Remind devs to check return values, especially for malloc() et al
MS ATC Screen (aka MSS3) decoder
vf_yadif: move x86 init code to x86/yadif.c
vf_gradfun: move x86 init code to x86/gradfun.c
roqvideo: Remove a totally unused dspcontext
smacker: remove some unused code
dsicin: remove dead assignment
aacdec: remove dead assignment
rl2: remove dead assignment
proresenc: make a variable local to the loop where it is used
alsdec: remove dead assignments
Conflicts:
Changelog
doc/developer.texi
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/version.h
libavfilter/gradfun.h
libavfilter/x86/gradfun.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
