Deprecate the entire library. Merged years ago to provide compatibility
with Libav, it remained unmaintained by the FFmpeg project and duplicated
functionality provided by libswresample.
In order to improve consistency and reduce attack surface, as well as to ease
burden on maintainers, it has been deprecated. Users of this library are asked
to migrate to libswresample, which, as well as providing more functionality,
is faster and has higher accuracy.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
It is used by the deprecated API avcodec_decode_video2 and ignored by the
new decode APIs (avcodec_send_packet/avcodec_receive_frame).
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Some http/1.0 implementations, like python's SimpleHTTPServer, can only support one client connection at a time. Making a second request while the first is still connected leads to a deadlock.
This change enables multiple connections for http/1.1 servers only, which need to support keepalive by default and should have no problem with concurrent requests.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Can be used by the api user to figure out what http features the server supports based on the response received.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Use static mutexes instead of requiring a lock manager. The behavior
should be roughly the same before and after this change for API users
which did not set the lock manager at all (except that a minor memory
leak disappears).
This improves network throughput of the hls demuxer by avoiding
the latency introduced by downloading segments one at a time.
The problem is particularly noticable over high-latency network
connections: for instance, if RTT is 250ms, there will a 250ms idle
period between when one segment response is read and the next one
starts.
The obvious solution to this is to use HTTP pipelining, where a
second request can be sent (on the persistent http/1.1 connection)
before the first response is fully read. Unfortunately the way the
http protocol is implemented in avformat makes implementing pipleining
very complex.
Instead, this commit simulates pipelining using two separate persistent
http connections. This has the advantage of working independently of
the http_persistent option, and can be used with http/1.0 servers as
well. The pair of connections is swapped every time a new segment starts
downloading, and a request for the next segment is sent on the secondary
connection right away. This means the second response will be ready and
waiting by the time the current response is fully read.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
This teaches the HLS demuxer to use the HTTP protocols
multiple_requests=1 option, to take advantage of "Connection:
Keep-Alive" when downloading playlists and segments from the HLS server.
With the new option, you can avoid TCP connection and TLS negotiation
overhead, which is particularly beneficial when streaming via a
high-latency internet connection.
Similar to the http_persistent option recently implemented in hlsenc.c
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
- normalize score to [0..100] instead of [0..85]
- change the default score to 8.2 to roughly keep existing behaviour
- take into account bit depth
- do not truncate to integer
Signed-off-by: Marton Balint <cus@passwd.hu>
If the user-supplied color in drawbox and drawgrid filters is non-opaque,
the box & grid painting overwrites the input's pixels (including alpha).
Users typically expect the alpha of the specified color to only act as a key
for compositing on top of the main input.
Added option allows users to select between replacement and composition.
Tested and documented.
Explicitly identify decoder/encoder wrappers with a common name. This
saves API users from guessing by the name suffix. For example, they
don't have to guess that "h264_qsv" is the h264 QSV implementation, and
instead they can just check the AVCodec .codec and .wrapper_name fields.
Explicitly mark AVCodec entries that are hardware decoders or most
likely hardware decoders with new AV_CODEC_CAPs. The purpose is allowing
API users listing hardware decoders in a more generic way. The proposed
AVCodecHWConfig does not provide this information fully, because it's
concerned with decoder configuration, not information about the fact
whether the hardware is used or not.
AV_CODEC_CAP_HYBRID exists specifically for QSV, which can have software
implementations in case the hardware is not capable.
Based on a patch by Philip Langdale <philipl@overt.org>.
Merges Libav commit 47687a2f8a.
Additionally:
* Mention that allrgb and allyuv do not support the "size" option.
* Separate examples into subsection.
Fixes ticket #6906.
Signed-off-by: Lou Logan <lou@lrcd.com>
The Developer Documentation had instructions to
subscribe to the ffmpeg-cvslog email list. But that is
no longer accurate. For the purposes in this section --
review of patches, discussion of development issues --
ffmpeg_devel is the appropriate email list. Some developers
may want to monitor ffmpeg-cvslog, but it is not mandatory.
This is v3 of this doc, based on discussion in thread
<https://ffmpeg.org/pipermail/ffmpeg-devel/2017-November/220528.html>
and in response to docs Maintainer comments in
<https://ffmpeg.org/pipermail/ffmpeg-devel/2017-December/221596.html>.
1. In doc/developer.texi, add a new section about
ffmpeg-devel, based on existing text from ffmpeg-cvslog
section regarding discussion of patches and of
development issues. Reflect wording from discussion at
<https://ffmpeg.org/pipermail/ffmpeg-devel/2017-November/221199.html>
but with copy-editing to make wording more concise.
2. In doc/developer.texi, rewrite the ffmpeg-cvslog section
to match the current usage of ffmpeg-cvslog. Some
developers choose to follow this list, but it is not
mandatory.
There are a lot of improvements possible to the
Developer Documentation page, beyond this refactoring.
However, making those improvements is a much bigger
and more difficult task. This change is "low hanging
fruit".
Signed-off-by: Jim DeLaHunt <from.ffmpeg-dev@jdlh.com>
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Previously, the Developer Documentation <ffmpeg.org/developer.html>
contained a single chapter, "1. Developer Guide," with all content under
that single chapter. Thus the document structure was one level deeper
and more complicated than it needed to be. It differed from similar
documents such as /faq.html, which have multiple chapters.
Eliminate the single chapter, and promote each section underneath to
chapter, and each subsection to section. Thus content and relative
structure remains the same, but the overall structure is simpler.
Anchors within the page remain the same.
Signed-off-by: Jim DeLaHunt <from.ffmpeg-dev@jdlh.com>
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
This is to take full advantage of Common Media Application Format(CMAF).
Now server can generate one content and serve both HLS and DASH players.
Reviewed-by: Steven Liu <lq@onvideo.cn>
Corpus VBR mode is a variant of standard VBR where the complexity
distribution midpoint is passed in rather than calculated for a specific
clip or chunk.
The valid range is [0, 10000]. 0 (default) uses standard VBR.
Signed-off-by: James Zern <jzern@google.com>
Supports only raw NV12 input.
Example use:
./vaapi_encode 1920 1080 test.yuv test.h264
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Liu, Kaixuan <kaixuan.liu@intel.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
The present value name for maximum thickness is 'max' which results in a
parse error of any thickness expression containing 'max(val1,val2)'.
Value renamed to 'fill'. Tested locally and documented.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This was added in early 2013 and abandoned several months later; as far as
I can tell, there are no external users. Future OpenCL use will be via
hwcontext, which requires neither special OpenCL-only API nor global state
in libavutil.
All internal users are also deleted - this is just the unsharp filter
(replaced by unsharp_opencl, which is more flexible) and the deshake filter
(no replacement).
Add two FAQs about running FFmpeg in the background.
The first explains the use of the -nostdin option in
a straightforward way. Text revised based on review.
The second FAQ starts from a confusing error message,
and leads to the solution, use of the -nostdin option.
The purpose of the second FAQ is to attract web searches
from people having the problem, and offer them a solution.
Add an anchor to the Main Options section of the ffmpeg
documentation, so that the FAQs can link directly there.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
For some strange reason "-t" option was only implemented
for input files while both "-t" and "-to" were available
for use for output files. This made extracting a range from
input file inconvenient.
This patch enables -to option for input so one can do
ffmpeg -ss 1:23:20 -to 1:27:22.3 -i myinput.mkv ...
Signed-off-by: Vitaly _Vi Shukela <vi0oss@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This can reduce latency and increase throughput, particularly on high
latency networks.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Reviewed-by: Jeyapal, Karthick <kjeyapal@akamai.com>
* commit '0e702124ee149593168cbbb7b30376249a64ae66':
doc: Provide better examples for hls and segment muxing
Merged-by: James Almer <jamrial@gmail.com>
* commit 'b46a77f19ddc4b2b5fa3187835ceb602a5244e24':
lavc: external hardware frame pool initialization
Includes the fix from e724bdfffb
Merged-by: James Almer <jamrial@gmail.com>
The user-supplied value for timecode_rate in drawtext is rounded
to nearest integer. So, a supplied value of 0.49 or lower is rounded to 0.
This throws a misleading error message which says "Timecode frame rate must be
specified". Changed message to account for values under one.
Also noted supported framerates for drop TC.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
suppress the "warning: assignment discards ‘const’ qualifier from
pointer target type" build warning.
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
suppress the "warning: assignment discards ‘const’ qualifier from
pointer target type" build warning.
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
suppress the "warning: assignment discards ‘const’ qualifier from
pointer target type" build warning.
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'b5f19f7478492307e4b4763aeac3180faf50e17f':
aac: Split function to parse ADTS header data into public and private part
Merged-by: James Almer <jamrial@gmail.com>
* commit 'ecc5c4db2dd3a0f328d95df89daa59f78b4b2810':
doc/examples/output: Cast pointer to the right (const) type
Merged-by: James Almer <jamrial@gmail.com>
This patch enables paletteuse to identify the transparency in incoming
video and tag transparent pixels on outgoing video with the correct
index from the palette.
This requires tracking the transparency index in the palette,
establishing an alpha threshold below which a pixel is considered
transparent and above which the pixel is considered opaque, and
additional changes to track the alpha value throughout the conversion
process.
This change is a partial fix for https://trac.ffmpeg.org/ticket/4443
However, animated GIFs are still output incorrectly due to a bug
in gif optimization which does not correctly handle transparency.
Signed-off-by: Clément Bœsch <u@pkh.me>
This adds a new API, which allows the API user to query the required
AVHWFramesContext parameters. This also reduces code duplication across
the hwaccels by introducing ff_decode_get_hw_frames_ctx(), which uses
the new API function. It takes care of initializing the hw_frames_ctx
if needed, and does additional error handling and API usage checking.
Support for VDA and Cuvid missing.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This applies a specific fixup to some Blu-ray streams which contain
redundant PPSs modifying irrelevant parameters of the stream which
confuse other transformations which require correct extradata.
A new single global PPS is created, and all of the redundant PPSs
within the stream are removed.
(cherry picked from commit e6874bc3af)
This is able to modify some header metadata found in the SPS/VUI,
and can also add/remove AUDs and insert user data in SEI NAL units.
(cherry picked from commit 9e93001b61)
(cherry picked from commit c42b62d1f9)
Support for this device has been removed in the Linux kernel since v2.6.37.
dv1394 has been superseded by libiec61883 which is functionally equivalent.
Signed-off-by: Josh de Kock <josh@itanimul.li>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The libavformat API is not suitable for exporting output devices as muxers.
Some practical problems are e.g. lack of timing/synchronization mechanisms
or interaction with output-specific features.
Correct typo in signalstats filter section and qualify description for variable
in select filter.
Signed-off-by: Gyan Doshi <gyandoshi@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Allows to specify the action to be performed when reading the last frame
from the internal FIFO buffer. By default the last frame is written to
filter output depending on the timestamp rounding method. When using
"pass" action the last frame is passed through if input duration
has not been reached yet.
Examples using an input file with 25Hz, 1.4sec duration:
- "fps=fps=1:round=near" generates an output file of 1sec
- "fps=fps=1:round=near:eof_action=pass" generates an output file of
2sec
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Split it off from install-data.
Among other things, this prevents spamming triplicate log lines during install.
Reviewed-by: Clément Bœsch <u@pkh.me>
Signed-off-by: James Almer <jamrial@gmail.com>
Align order of "start_time" option within fps filter documentation to actual
implementation. Also fix some documentation cosmetics.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
* commit 'c483398bb7ef66f61ed2dcb09f3d6160683da0eb':
build: Drop DOC_ prefix from EXAMPLES-related variables
Merged-by: James Almer <jamrial@gmail.com>
* commit '4141a5a240fba44b4b4a1c488c279d7dd8a11ec7':
Use modern avconv syntax for codec selection in documentation and tests
Merged-by: James Almer <jamrial@gmail.com>
* commit 'c95169f0ec68bdeeabc5fde8aa4076f406242524':
build: Move cli tool sources to a separate subdirectory
Merged-by: James Almer <jamrial@gmail.com>
* commit 'ab566cc96bc0c31b34d944214bc06cec8ae8b640':
build: Separate logic for building examples from that for building avtools
Merged-by: James Almer <jamrial@gmail.com>
* commit 'acb0dea27efff4b35796015b96570b59fd517078':
build: Split logic for building examples off into a separate Makefile
We already have a Makefile in doc/examples, but it's separate from the build
system and meant to be installed as part of the documentation to help users
compile the installed .c example files.
Move it to Makefile.example to make place for the new build system Makefile.
Merged-by: James Almer <jamrial@gmail.com>
* commit 'db4903eb4875bed6c5b8a4259cdd7bc1768dfdf6':
build: Avoid duplication in examples lists
See 1a88e84fd5
Merged-by: James Almer <jamrial@gmail.com>
The decklink input pixel format can now be specified with the 'raw_format'
option. The -bm_v210 option is now deprecated.
Signed-off-by: Marton Balint <cus@passwd.hu>
This reduces the need for an edit list; streams that start with
e.g. dts=-1, pts=0 can be encoded as dts=0, pts=0 (which is valid
in mov/mp4) by shifting the dts values of all packets forward.
This avoids the need for edit lists for such streams (while they
still are needed for audio streams with encoder delay).
This eases conformance with the DASH-IF interoperability guidelines.
Signed-off-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'e6bff23f1e11aefb16a2b5d6ee72bf7469c5a66e':
cpu: add a function for querying maximum required data alignment
Adapted to work with the arbitrary runtime cpuflag changes av_force_cpu_flags()
can generate.
Merged-by: James Almer <jamrial@gmail.com>
Support for this device has been removed in kernel since v2.6.37. dv1394 has been superseded by libiec61883 which is functionally equivalent.
Signed-off-by: Josh de Kock <josh@itanimul.li>
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This flag replaces the deprecated, non-prefixed HWACCEL_CODEC_CAP_EXPERIMENTAL
one.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Main use-case is proxying avio through a foreign I/O layer and a custom
AVIO context, without losing latency and performance characteristics.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Merged from Libav commit 173b56218f.
Before this commit, AVIOContext is to be freed with a plain av_free(),
which prevents us from adding any deeper structure to it.
(cherry picked from commit 99684f3ae7)
Signed-off-by: James Almer <jamrial@gmail.com>
Main use-case is proxying avio through a foreign I/O layer and a custom
AVIO context, without losing latency and performance characteristics.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes: loop.m3u
The default max iteration count of 1000 is arbitrary and ideas for a better solution are welcome
Found-by: Xiaohei and Wangchu from Alibaba Security Team
Previous version reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The -map option allows for a trailing ? so that an error is not thrown if
the input stream does not exist.
This capability is extended to the map_channel option.
This allows a ffmpeg command not to break if an input channel does not
exist, which can be of use (for instance, scripts processing audio
channels with sources having unset number of audio channels).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use AVCodecContext.compression_level rather than a private option,
replacing the H.264-specific quality option (which stays only for
compatibility).
This now works with the H.265 encoder in the i965 driver, as well as
the existing cases with the H.264 encoder.
(cherry picked from commit 19388a7200)
This applies a specific fixup to some Bluray streams which contain
redundant PPSs modifying irrelevant parameters of the stream which
confuse other transformations which require correct extradata.
A new single global PPS is created, and all of the redundant PPSs
within the stream are removed.
Black isn't always just memset(ptr, 0, size). Limited YUV in particular
requires relatively non-obvious values, and filling a frame with
repeating 0 bytes is disallowed in some contexts. With component sizes
larger than 8 or packed YUV, this can become relatively complicated. So
having a generic function for this seems helpful.
In order to handle the complex cases in a generic way without destroying
performance, this code attempts to compute a black pixel, and then uses
that value to clear the image data quickly by using a function like
memset.
Common cases like yuv410p10 or rgba can't be handled with a simple
memset, so there is some code to fill memory with 2/4/8 byte patterns.
For the remaining cases, a generic slow fallback is used.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Merged from Libav commit 45df7adc1d.
Use AVCodecContext.compression_level rather than a private option,
replacing the H.264-specific quality option (which stays only for
compatibility).
This now works with the H.265 encoder in the i965 driver, as well as
the existing cases with the H.264 encoder.
Makes behaviour of 805ce25b1d optional, re-enables
HLS key rotation feature
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: DHE <git@dehacked.net>
Works with VAAPI, VDPAU, DXVA2 and D3D11VA.
Signed-off-by: Liu, Kaixuan <kaixuan.liu@intel.com>
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
Black isn't always just memset(ptr, 0, size). Limited YUV in particular
requires relatively non-obvious values, and filling a frame with
repeating 0 bytes is disallowed in some contexts. With component sizes
larger than 8 or packed YUV, this can become relatively complicated. So
having a generic function for this seems helpful.
In order to handle the complex cases in a generic way without destroying
performance, this code attempts to compute a black pixel, and then uses
that value to clear the image data quickly by using a function like
memset.
Common cases like yuv410p10 or rgba can't be handled with a simple
memset, so there is some code to fill memory with 2/4/8 byte patterns.
For the remaining cases, a generic slow fallback is used.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
For the blue and violet noise, I took the pink and brown noise
respectively and subtracted the offsets instead of adding them. When I
eyeball the frequency spectrum of the resulting outputs it looks correct
to me, i.e. the blue graph appears to be a mirror image of the pink, and
the same can be said of the violet and the brown. I did not do anything
else to confirm the correctness.
v2:
- use uint16_t instead of int to store 10-bit ancillary data
- fix ancillary line numbers for 1080p
- some comments and clarifications as requested by Aaron Levinson
Signed-off-by: Marton Balint <cus@passwd.hu>
This also add supports for 4K DeckLink cards because they always output the
ancillary data in 10-bit.
v2:
- only try teletext decoding for 576i PAL mode
- some comments as requested by Aaron Levinson
Signed-off-by: Marton Balint <cus@passwd.hu>
This one changes the previous vmaf patch to libvmaf to keep it separate from the
native implementation of vmaf inside ffmpeg later.
Signed-off-by: Ashish Singh <ashk43712@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Merges Libav commit f9e7a2f95a.
Also adds untested VP9 support.
The check for DXVA2 COBJs is removed. Just update your MinGW to
something newer than a 5 year old release.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
To be used with the new d3d11 hwaccel decode API.
With the new hwaccel API, we don't want surfaces to depend on the
decoder (other than the required dimension and format). The old D3D11VA
pixfmt uses ID3D11VideoDecoderOutputView pointers, which include the
decoder configuration, and thus is incompatible with the new hwaccel
API. This patch introduces AV_PIX_FMT_D3D11, which uses ID3D11Texture2D
and an index. It's simpler and compatible with the new hwaccel API.
The introduced hwcontext supports only the new pixfmt.
Frame upload code untested.
Significantly based on work by Steve Lhomme <robux4@gmail.com>, but with
heavy changes/rewrites.
Merges Libav commit fff90422d1.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
If flushing is not disabled, then mux.c will signal the end of the packets with
an AVIO_DATA_MARKER_FLUSH_POINT, and aviobuf will be able to decide to flush or
not based on the preferred minimum packet size set by the used protocol.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
Takes a raw input stream containing frames with correct timestamps but
possibly out of order and inserts additional show-existing-frame
packets to correct the ordering.
(cherry picked from commit 34e051d168)
(cherry picked from commit b43b95f478)
Also converted from bitstream to get_bits.
NASM is more actively maintained and permits generating dependency information
as a sideeffect of assembling, thus cutting build times in half.
(Cherry-picked from libav commit 57b753b445)
Signed-off-by: James Almer <jamrial@gmail.com>
According to libavfilter/scale.c, if the width and height are both
less than or equal to 0 then the input size is used for both
dimensions. It does not need to be -1. -1:-1 is the same as 0:0 which
is the same as -10:-42, etc.
if (w < 0 && h < 0)
eval_w = eval_h = 0;
The documentation for the zscale filter has also been updated since the
behavior is identical.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
