Changes to vf_drawtext.c written by
Calvin Walton <calvin.walton@kepstin.ca>
Changes to filters.texi written by
greg Luce <electron.rotoscope@gmail.com>
with lots of help from Moritz Barsnick and Gyan
Fixes#7947.
currently master playlist and subtitle playlist creation does not use
temporary files even when temp_file flag is set. Most of the use cases
it is not a problem because master playlist creation happens once on the
beginning of the whole process. But if master playlist is periodically
re-created because of master_pl_refresh_rate is set, non-atomic playlist
creation may cause problems in case of live streaming. This patch
correct this behavior by adding this functionality.
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
When multiple variant streams are specified by var_stream_map option,
%v is expected either in the filename or in the last sub-directory name,
but only in one of them. When both of them contains %v string, current
error message only states half of the truth.
And even %v may appears several times inside the last sub-directory name
or in filename pattern.
This patch clarifies this in the log message and in the doc also.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
When multiple variant streams are specified by var_stream_map option, %v
placeholder in various names ensures that each variant has its unique
names. Currently %v is substituted by its variant index value (0, 1, 2
etc.). In some use cases it would be handy to specify names for variants
instead of numerical indexes. This patch makes it possible to use names
instead of default indexes. In var_stream_map option each or some of the
variant streams may use an optional name attributum (e.g.
-var_stream_map "v:0,a:0,name:sd v:1,a:1,name:720p") If a name is
specified for a variant, then this name value will be used as
substitution value of %v instead of the default index value.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@onvideo.cn>
FF_DECODE_ERROR_CONCEALMENT_ACTIVE is set when the decoded frame has error(s) but the returned value from
avcodec_receive_frame is zero i.e. concealed errors
Signed-off-by: Amir Pauker <amir@livelyvideo.tv>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Remove the rain in the input image/video by applying the derain
methods based on convolutional neural networks. Training scripts
as well as scripts for model generation are provided in the
repository at https://github.com/XueweiMeng/derain_filter.git.
Signed-off-by: Xuewei Meng <xwmeng96@gmail.com>
The default is to dump extradata to keyframes, not all frames.
Also improve the description of the relevant AVOption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Explain that the default Lanczos filter parameter is 3 and that it can be
changed by the param0 option.
Signed-off-by: Werner Robitza <werner.robitza@gmail.com>
ff_filter_get_nb_threads() respect AVFilterContext.nb_threads and
graph->nb_threads both, in most case, we perfer this API than using
ctx->graph->nb_threads directly.
Reviewed-by: Steven Liu <lq@onvideo.cn>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
This fixes the description of the values for src_range and dst_range to
include the possible values and their meanings.
Signed-off-by: Werner Robitza <werner.robitza@gmail.com>
Signed-off-by: Gyan Doshi <ffmpeg@gyani.pro>
Because the Original repository author loss loss of communication,
add new sr filter script repository.
Thanks to Gyan Doshi for a suggestion.
Signed-Off-By: Steven Liu <lq@chinaffmpeg.org>
Directed to the AviSynth+ entry on AviSynth Wiki rather than to
the github repository, since the wiki page is both more informative
and has the relevant Git/download links. The github releases page
is little more than a changelog.
Cleanup the applehttp as demuxer name, when use the command :
ffmpeg -formats, get the confused information like:
"
E hls Apple HTTP Live Streaming
D hls,applehttp Apple HTTP Live Streaming
"
we don't use applehttp as the demuxer/muxer name usually, so
cleanup the applehttp and update the documents.
After the change, get the information from "ffmpeg -formats":
"
DE hls Apple HTTP Live Streaming
"
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Fix ticket #7297
The current setting for send-expect-100 option is either
enabled if applicable or forced enabled, no option to force
disable the header. This change is to expand the option setting
to provide more flexibility, which is useful for rstp case.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The lensfun filter wraps the lensfun library which performs
transformations on videos to correct for lens distortion. Often this
results in areas in the input being mapped to areas that fall outside
the boundaries of the output. The library has a parameter called scale
which is a scale factor applied to the output video. By decreasing it it
is possible to regain the areas of the video which would otherwise have
been lost. There is a special value of 0 which indicates that the
library should automatically determine a scale factor that results in
the output frame being filled (i.e. little or no black/unmapped areas).
This patch adds a corresponding scale option to the lensfun filter which
is passed through to the library. The existing behaviour of using the
automatic value of 0 is retained as the default behaviour, while other
values will be passed through to the library.
Signed-off-by: Daniel Playfair Cal <daniel.playfair.cal@gmail.com>
Nobody is going to check the queue anymore, so users must now subscribe to
send messages to ffmpeg-devel. This will prevent orphaned/ignored messages
from rotting in the abandoned queue. This matches the behavior of ffmpeg-user
and libav-user.
Also, this addresses some other nits.
Signed-off-by: Lou Logan <lou@lrcd.com>
set_metadata with many entries is not very efficient, and with small audio
frames the performance loss is noticable. Also with this very simple
calculations (like peak) can be even further optimized.
Unfoturnately there are some small differences in metadata and av_log info
output, so factorizing calculations and output might not worth the hassle.
Signed-off-by: Marton Balint <cus@passwd.hu>
This removes lots of code duplication and also allows more complex specifiers,
for example you can use p:204:aⓂ️language:eng to select the English language
audio stream from program 204.
Signed-off-by: Marton Balint <cus@passwd.hu>
* Outputs ASS lines with basic coloring and font scaling for each
given region.
* Sets the default style to the resolution of the subtitle plane
(for example, 960x540 / 36pt font for profile A).
* Has options to:
* Disable ruby text (which is coded as regions which have
half-height text in libaribb24).
Enabled by default as without positioning ruby text only
confuses as it is usually coded in the beginning of the decoded
subtitle line.
* Set the working directory, in which libaribb24 will read
configuration as well as into which it may save broadcast extra
symbols as PNG.
Unset by default.
The unconventional library check can be explained by the library's
current master branch being licensed as LGPLv3, but at the time of
writing the latest official release is still licensed under GPLv3.
Thus, one either has to wait for the following release, or enable
GPLv3.
This attaches the logic of picking the mode of for the next picture to
the output, which simplifies some choices by removing the concept of
the picture for which input is not yet available. At the same time,
we allow more complex reference structures and track more reference
metadata (particularly the contents of the DPB) for use in the
codec-specific code.
It also adds flags to explicitly track the available features of the
different codecs. The new structure also allows open-GOP support, so
that is now available for codecs which can do it.
The encoders such as libx264 support different QPs offset for different MBs,
it makes possible for ROI-based encoding. It makes sense to add support
within ffmpeg to generate/accept ROI infos and pass into encoders.
Typical usage: After AVFrame is decoded, a ffmpeg filter or user's code
generates ROI info for that frame, and the encoder finally does the
ROI-based encoding.
The ROI info is maintained as side data of AVFrame.
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
