1
0
mirror of https://github.com/FFmpeg/FFmpeg.git synced 2024-12-12 19:18:44 +02:00
FFmpeg/libavcodec/ac3.h
Justin Ruggles 687671f03b pass bap table to ff_ac3_bit_alloc_calc_bap()
Originally committed as revision 13694 to svn://svn.ffmpeg.org/ffmpeg/trunk
2008-06-07 22:29:54 +00:00

186 lines
6.5 KiB
C

/*
* Common code between AC3 encoder and decoder
* Copyright (c) 2000, 2001, 2002 Fabrice Bellard.
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
/**
* @file ac3.h
* Common code between AC3 encoder and decoder.
*/
#ifndef FFMPEG_AC3_H
#define FFMPEG_AC3_H
#include "ac3tab.h"
#define AC3_MAX_CODED_FRAME_SIZE 3840 /* in bytes */
#define AC3_MAX_CHANNELS 6 /* including LFE channel */
#define NB_BLOCKS 6 /* number of PCM blocks inside an AC3 frame */
#define AC3_FRAME_SIZE (NB_BLOCKS * 256)
/* exponent encoding strategy */
#define EXP_REUSE 0
#define EXP_NEW 1
#define EXP_D15 1
#define EXP_D25 2
#define EXP_D45 3
/** Delta bit allocation strategy */
typedef enum {
DBA_REUSE = 0,
DBA_NEW,
DBA_NONE,
DBA_RESERVED
} AC3DeltaStrategy;
/** Channel mode (audio coding mode) */
typedef enum {
AC3_CHMODE_DUALMONO = 0,
AC3_CHMODE_MONO,
AC3_CHMODE_STEREO,
AC3_CHMODE_3F,
AC3_CHMODE_2F1R,
AC3_CHMODE_3F1R,
AC3_CHMODE_2F2R,
AC3_CHMODE_3F2R
} AC3ChannelMode;
typedef struct AC3BitAllocParameters {
int sr_code;
int sr_shift;
int slow_gain, slow_decay, fast_decay, db_per_bit, floor;
int cpl_fast_leak, cpl_slow_leak;
} AC3BitAllocParameters;
/**
* @struct AC3HeaderInfo
* Coded AC-3 header values up to the lfeon element, plus derived values.
*/
typedef struct {
/** @defgroup coded Coded elements
* @{
*/
uint16_t sync_word;
uint16_t crc1;
uint8_t sr_code;
uint8_t bitstream_id;
uint8_t channel_mode;
uint8_t lfe_on;
uint8_t frame_type;
int substreamid; ///< substream identification
int center_mix_level; ///< Center mix level index
int surround_mix_level; ///< Surround mix level index
uint16_t channel_map;
int num_blocks; ///< number of audio blocks
/** @} */
/** @defgroup derived Derived values
* @{
*/
uint8_t sr_shift;
uint16_t sample_rate;
uint32_t bit_rate;
uint8_t channels;
uint16_t frame_size;
/** @} */
} AC3HeaderInfo;
typedef enum {
EAC3_FRAME_TYPE_INDEPENDENT = 0,
EAC3_FRAME_TYPE_DEPENDENT,
EAC3_FRAME_TYPE_AC3_CONVERT,
EAC3_FRAME_TYPE_RESERVED
} EAC3FrameType;
void ac3_common_init(void);
/**
* Calculates the log power-spectral density of the input signal.
* This gives a rough estimate of signal power in the frequency domain by using
* the spectral envelope (exponents). The psd is also separately grouped
* into critical bands for use in the calculating the masking curve.
* 128 units in psd = -6 dB. The dbknee parameter in AC3BitAllocParameters
* determines the reference level.
*
* @param[in] exp frequency coefficient exponents
* @param[in] start starting bin location
* @param[in] end ending bin location
* @param[out] psd signal power for each frequency bin
* @param[out] band_psd signal power for each critical band
*/
void ff_ac3_bit_alloc_calc_psd(int8_t *exp, int start, int end, int16_t *psd,
int16_t *band_psd);
/**
* Calculates the masking curve.
* First, the excitation is calculated using parameters in \p s and the signal
* power in each critical band. The excitation is compared with a predefined
* hearing threshold table to produce the masking curve. If delta bit
* allocation information is provided, it is used for adjusting the masking
* curve, usually to give a closer match to a better psychoacoustic model.
*
* @param[in] s adjustable bit allocation parameters
* @param[in] band_psd signal power for each critical band
* @param[in] start starting bin location
* @param[in] end ending bin location
* @param[in] fast_gain fast gain (estimated signal-to-mask ratio)
* @param[in] is_lfe whether or not the channel being processed is the LFE
* @param[in] dba_mode delta bit allocation mode (none, reuse, or new)
* @param[in] dba_nsegs number of delta segments
* @param[in] dba_offsets location offsets for each segment
* @param[in] dba_lengths length of each segment
* @param[in] dba_values delta bit allocation for each segment
* @param[out] mask calculated masking curve
*/
void ff_ac3_bit_alloc_calc_mask(AC3BitAllocParameters *s, int16_t *band_psd,
int start, int end, int fast_gain, int is_lfe,
int dba_mode, int dba_nsegs, uint8_t *dba_offsets,
uint8_t *dba_lengths, uint8_t *dba_values,
int16_t *mask);
/**
* Calculates bit allocation pointers.
* The SNR is the difference between the masking curve and the signal. AC-3
* uses this value for each frequency bin to allocate bits. The \p snroffset
* parameter is a global adjustment to the SNR for all bins.
*
* @param[in] mask masking curve
* @param[in] psd signal power for each frequency bin
* @param[in] start starting bin location
* @param[in] end ending bin location
* @param[in] snr_offset SNR adjustment
* @param[in] floor noise floor
* @param[in] bap_tab look-up table for bit allocation pointers
* @param[out] bap bit allocation pointers
*/
void ff_ac3_bit_alloc_calc_bap(int16_t *mask, int16_t *psd, int start, int end,
int snr_offset, int floor,
const uint8_t *bap_tab, uint8_t *bap);
void ac3_parametric_bit_allocation(AC3BitAllocParameters *s, uint8_t *bap,
int8_t *exp, int start, int end,
int snr_offset, int fast_gain, int is_lfe,
int dba_mode, int dba_nsegs,
uint8_t *dba_offsets, uint8_t *dba_lengths,
uint8_t *dba_values);
#endif /* FFMPEG_AC3_H */