Previously we used a single-line prompt for a tag annotation. Now we're using the commit message
prompt.
I've had to update other uses of that prompt to allow the summary and description labels to
be passed in
Previously, we would only show the authors based on local commits, but sometimes you want to set a commit author
to that of a commit on another branch. Now, so long as you've viewed the branch's commits, the author will appear
as a suggestion.
We have a use-case to rebind 'm' to the merge action in the branches panel. There's three ways to handle this:
1) For all global keybindings, define a per-panel key that invokes it
2) Give a name to all controller actions and allow them to be invoked in custom commands
3) Allow checking for merge conflicts after running a custom command so that users can add their own 'git merge' custom command
that matches the in-built action
Option 1 is hairy, Option 2 though good for users introduces new backwards compatibility issues that I don't want to do
right now, and option 3 is trivially easy to implement so that's what I'm doing.
I've put this under an 'after' key so that we can add more things later. I'm imagining other things like being able to
move the cursor to a newly added item etc.
I considered always running this hook by default but I'd rather not: it's matching on the output text and I'd rather something
like that be explicitly opted-into to avoid cases where we erroneously believe that there are conflicts.
Save has been deprecated for a while, push is the recommended way to save a
stash. Push has been available since 2.13, so we can use it without problems.
The global counter approach is easy to understand but it's brittle and depends on implicit behaviour that is not very discoverable.
With a global counter, if any goroutine accidentally decrements the counter twice, we'll think lazygit is idle when it's actually busy.
Likewise if a goroutine accidentally increments the counter twice we'll think lazygit is busy when it's actually idle.
With the new approach we have a map of tasks where each task can either be busy or not. We create a new task and add it to the map
when we spawn a worker goroutine (among other things) and we remove it once the task is done.
The task can also be paused and continued for situations where we switch back and forth between running a program and asking for user
input.
In order for this to work with `git push` (and other commands that require credentials) we need to obtain the task from gocui when
we create the worker goroutine, and then pass it along to the commands package to pause/continue the task as required. This is
MUCH more discoverable than the old approach which just decremented and incremented the global counter from within the commands package,
but it's at the cost of expanding some function signatures (arguably a good thing).
Likewise, whenever you want to call WithWaitingStatus or WithLoaderPanel the callback will now have access to the task for pausing/
continuing. We only need to actually make use of this functionality in a couple of places so it's a high price to pay, but I don't
know if I want to introduce a WithWaitingStatusTask and WithLoaderPanelTask function (open to suggestions).
We had a race condition due to refreshing branches in two different places, one which refreshed reflog commits
beforehand. The race condition meant that upon load we wouldn't see recency values (provided by the reflog commits)
against the branches
Turns out we're just running our refresh functions one after the other which isn't ideal but we can fix that separately.
As it stands this wait group isn't doing anything.
I don't know if this is a hack or not: we run a git command and increment the pending action
count to 1 but at some point the command requests a username or password, so we need to prompt
the user to enter that. At that point we don't want to say that there is a pending action,
so we decrement the action count before prompting the user and then re-increment it again afterward.
Given that we panic when the counter goes below zero, it's important that it's not zero
when we run the git command (should be impossible anyway).
I toyed with a different approach using channels and a long-running goroutine that
handles all commands that request credentials but it feels over-engineered compared to this
commit's approach.
Given that we now persist search/filter states even after a side context loses focus, we need to make it really
clear to the user that the context is currently being searched/filtered
This is a pickle: initially I wanted it so that a filter would cancel automatically if the current context lost focus.
But there are situations where you want to retain the focus, e.g. when a popup appears, or when you view the commits
of a branch. The issue is that when you view the commits of a branch, the branches context is removed from the context
stack. Even if this were not the case, you could imagine going branches -> sub-commits -> files -> sub-commits, where
in that case branches would definitely be off the stack upon navigating to the files context.
So because I'm too lazy to find a proper solution to this problem, I'm just making it so that filters in side contexts
are retained unless explicitly cancelled.
There's another edge case this commit handles which is that if I'm in the sub-commits context via the branches context
and start a search, then navigate to the reflog context and hit enter to get to the sub-commits context again, I need
to cancel the search before I switch. Likewise with the commit files context.
We have not been good at consistent casing so far. Now we use 'Sentence case' everywhere. EVERYWHERE.
Also Removing 'Lc' prefix from i18n field names: the 'Lc' stood for lowercase but now that everything
is in 'Sentence case' there's no need for the distinction.
I've got a couple lower case things I've kept: namely, things that show up in parentheses.
By constructing an arg vector manually, we no longer need to quote arguments
Mandate that args must be passed when building a command
Now you need to provide an args array when building a command.
There are a handful of places where we need to deal with a string,
such as with user-defined custom commands, and for those we now require
that at the callsite they use str.ToArgv to do that. I don't want
to provide a method out of the box for it because I want to discourage its
use.
For some reason we were invoking a command through a shell when amending a
commit, and I don't believe we needed to do that as there was nothing user-
supplied about the command. So I've switched to using a regular command out-
side the shell there
It's not possible to reliably stage things into a custom patch when "ignore
whitespace" is on, so always treat it as off here (like we do in the staging
panel).
It looks like this is a regression that was introduced in 8edad826ca.
Our refresh code may try to push a context. It does this in two places:
1) when all merge conflicts are resolved, we push a 'continue merge?' confirmation context
2) when all conflicts of a given file are resolved and we're in the merge conflicts context,
we push the files context.
Sometimes we push the confirmation context and then push the files context over it, so the user
never sees the confirmation context.
This commit fixes the race condition by adding a check to ensure that we're still in the
merge conflicts panel before we try escaping from it
We now refresh the staging panel when doing an unscoped refresh, so that if we commit from the staging panel we escape
back to the files panel if need be. But that causes flickering when doing an unscoped refresh from other contexts,
because the refreshStagingPanel function assumes that the staging panel has focus. So we're adding a guard at the top
of that function to early exit if we don't have focus.
When cycling history, we want to make it so that upon returning to the original prompt, you get your text back.
Importantly, we don't want to use the existing preservedMessage field for that because that's only for preserving
a NEW commit message, and we don't want the history stuff of the commit reword flow to overwrite that.
When we use the one panel for the entire commit message, its tricky to have a keybinding both for adding a newline and submitting.
By having two panels: one for the summary line and one for the description, we allow for 'enter' to submit the message when done from the summary panel,
and 'enter' to add a newline when done from the description panel. Alt-enter, for those who can use that key combo, also works for submitting the message
from the description panel. For those who can't use that key combo, and don't want to remap the keybinding, they can hit tab to go back to the summary panel
and then 'enter' to submit the message.
We have some awkwardness in that both contexts (i.e. panels) need to appear and disappear in tandem and we don't have a great way of handling that concept,
so we just push both contexts one after the other, and likewise remove both contexts when we escape.
This begins a big refactor of moving more code out of the Gui struct into contexts, controllers, and helpers. We also move some code into structs in the
gui package purely for the sake of better encapsulation
When cycling history, we want to make it so that upon returning to the original prompt, you get your text back.
Importantly, we don't want to use the existing preservedMessage field for that because that's only for preserving
a NEW commit message, and we don't want the history stuff of the commit reword flow to overwrite that.
When we use the one panel for the entire commit message, its tricky to have a keybinding both for adding a newline and submitting.
By having two panels: one for the summary line and one for the description, we allow for 'enter' to submit the message when done from the summary panel,
and 'enter' to add a newline when done from the description panel. Alt-enter, for those who can use that key combo, also works for submitting the message
from the description panel. For those who can't use that key combo, and don't want to remap the keybinding, they can hit tab to go back to the summary panel
and then 'enter' to submit the message.
We have some awkwardness in that both contexts (i.e. panels) need to appear and disappear in tandem and we don't have a great way of handling that concept,
so we just push both contexts one after the other, and likewise remove both contexts when we escape.
The "open" command is supposed to behave in the same way as double-clicking a
file in the Finder/Explorer. The concept of jumping to a specific line in the
file doesn't make sense for this; use "edit" instead.
