This implements specification requirement:
https://github.com/open-telemetry/opentelemetry-specification/blob/main/specification/resource/sdk.md#resource-creation
- Changes `resource.NewWithAttributes` to require a schema URL. The old function
is still available as `resource.NewSchemaless`. This is a breaking change.
We want to encourage using schema URL and make it a conscious choice to have a
resource without schema.
- Merge schema URLs acccording to the spec in resource.Merge.
- Several builtin resource detectors now correctly populate the schema URL.
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
This adds support for schema URL to the Tracer according to the specification:
https://github.com/open-telemetry/opentelemetry-specification/pull/1666
(Link to replaced by the link to the spec after that PR is merged)
For the future: once the proto is updated we will need to populate the
schema_url field in the messages.
* Refactor TraceState
* Update tracecontext propagator to use new TraceState
* Add TraceStateFromKeyValues to oteltest
* Use oteltest to test TraceState
* Replace IsEmpty with Len for TraceState
* Replace ParseTraceState with ParseTraceStateString
* Clean up naming
* Add immutability test for TraceState
* Add changes to changelog
* Fixes
* Document argument type change in changelog
* Address feedback
Remove circularity of TestTraceStateLen.
* Add support for scheme in OTEL_EXPORTER_OTLP_ENDPOINT according to the spec
* Changes after review from pellared
* Changes after review from pellared - 2
* Changes after review from pellared - 3
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Remove TODO from ReadOnlySpan interface
* Remove the Tracer method from the ReadOnlySpan
This is not required by the specification nor the use of this interface.
* Remove IsRecording from the ReadOnlySpan interface
A read-only span value does not need to know if updates to it will be
recorded. It by definition cannot be updated so no point in
communicating if an update would be recorded.
* Document the ReadOnlySpan interface
* Rename messageEvent* to just event*
* Move the SpanSnapshot into its own file
* Update ReadOnlySpan interface with meta info methods
Add the DroppedAttributes, DroppedLinks, DroppedEvents, and
ChildSpanCount methods to the interface to return additional information
about the span not specified by the specification, but that we are
already providing.
* Add SpanStub to the sdk/trace/tracetest pkg
* Redefine ExportSpans of SpanExporter with ReadOnlySpan
* Rename SpanSnapshot to snapshot and purge docs
* Remove Snapshot method from snapshot type
This method is a hold-over from previous version of the ReadOnlySpan
interface is not needed.
* Update CHANGELOG with changes
* Split large jaeger span batch to admire the udp packet size
* Refactory EmitBatch and produce complaining error msg when serialization fails
* Add tests for large jaeger spans
Update CHANGELOG.md
* Update CHANGELOG.md
* Fix compatibility-test on windows.
* Add test case for exporting spans with multiple errors.
Add Status type to SDK
Use this type to encapsulate the Span status similar to the Event type
encapsulating a Span event and the Link type a span link.
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Removed different types of Detectors for Resources.
This change simplifies different types of collectors into one list. The
order of this list determines how they are applied. Defaults are
applied when the user does not supply any detectors. To achieve
default behavior and additional behavior a DefaultDetectors struct has been
created
* missed prometheus test.
* Changed behavior around WithDetectors(nil)
Added examples of use of WithDetectors.
* Added NoOp example
* Changed test to reflect acutal default case
This changes because WithDetector() no longer is the same as not using WithDetector()
* Unexports the noOp detector
* Updated changelog
* Fixes to spelling mistakes.
* Added NewEmptyResouce and unexported builtin detectors
* Fix for prometheus example
* Resource has two Rs
I need to get a new R key it seems.
Co-authored-by: Sam Xie <xsambundy@gmail.com>
* Replaced NewEmptyResource() with New()
* Fix test function name
* Comment fixups.
* Apply suggestions from code review
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
Co-authored-by: Sam Xie <xsambundy@gmail.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Move the Event type from the API to the SDK
This type is not used in the API. It is used in the SDK and then through
the processing pipelines. Move it to the package that originates its use.
* Add changes to changelog
* Update CHANGELOG.md
Co-authored-by: Gustavo Silva Paiva <guustavo.paiva@gmail.com>
Co-authored-by: Gustavo Silva Paiva <guustavo.paiva@gmail.com>
* Wrap TCP listener
The mock collector listener now signals when it receives a connection
instead of waiting an arbitrary time an hoping the event happens.
* Only close the listener C chan once
* Apply PR feedback
* Backwards compatible support for closed listener check
* Cleanup
* Fix flaky OTLP exporter reconnect test
The tests that check the OTLP exporter will reconnect wait for the
reconnect loop to complete, in theory. However, they do not yield the
active goroutine scheduling. The reconnect loop is in its own goroutine
meaning it is unlikely for that loop to be re-entered, especially on
slow systems. This updates the tests call runtime.Gosched when waiting
for the reconnect loop and yield the scheduling to other goroutines.
* Add changes to changelog
* Use time.After instead of Timer
* Remove changelog entry
* Changes stdout to expose the actual tracerProvider
This enables flushing and stopping the exporter.
* updated changelog
* Update CHANGELOG.md
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* docs: update InstallNewPipeline example comment
* docs: update changelog after PR submit
* fix: wrap issue number in parens
* docs: use test example to document prometheus.InstallNewPipeline
* fix: update CHANGELOG to reflect PR state
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Adjust instrumentation lib name / version key
* Adjust array attribute serialization
* Adjust span status mapping
- remove `otel.status_description`; use `error` instead for description
- do not report status code if unset
- do not report description if OK or unset
- omit tags if no tag has been mapped
- adjust tests
* Set remote endpoint according to the spec
- See
https://github.com/open-telemetry/opentelemetry-specification/blob/main/specification/trace/sdk_exporters/zipkin.md#remote-endpoint
* Fix remaining tests
* Update CHANGELOG
* Add some more tests
* Address PR feedback
- Simplify deletion of redundant error code
- Simplify endpoint rank determination
* More tests for remote endpoint
* remove process config for Jaeger exporter
* remove process config for Jaeger exporter
* Add CHANGELOG.md back
* Add CHANGLOG.md changes back
* fill in PR number in CHANGELOG
* Update CHANGELOG.md
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Make ExportSpans for Jaeger honor deadline
* Make variable name more descriptive
* new commit
* Revert "new commit"
This reverts commit 06e24cc38d.
* Change PR number in changelog
* Take out separate goroutine and add back TODO
* Check error string
* Fix error assert
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Make TraceFlags spec-compliant
* Remove `trace.FlagsDebug` and `trace.FlagsDeferred`
* These are used only by the B3 propagator and will be handled there in the `context.Context`
* Make `trace.TraceFlags` a defined type, aliasing `byte`
* Move `IsSampled` method from `trace.SpanContext` to `trace.TraceFlags`
* Add `Sampled(bool)` method to `trace.TraceFlags`
* Implement `Stringer` and `json.Marshaler` for `trace.TraceFlags`
Signed-off-by: Anthony J Mirabella <a9@aneurysm9.com>
* Rename `TraceFlags.Sampled()` to `TraceFlags.WithSampled()` for consistency
* Restore `SpanContext.IsSampled()` method.
Signed-off-by: Anthony J Mirabella <a9@aneurysm9.com>
* Update precedence of event name in Jaeger exporter
The OTel specification states that the event needs to be recorded as a
log with its name set to a tag having the "event" key. That key needs to
be overridden when there is an attribute with the same key. This updates
to implement this.
Resolves#1767
* Add changes to changelog
* Update PR number in changelog
* lint
* Fix testCollectorEndpoint typo and add tag assertions in jaeger_test
* add PR number for CHANGLOG
* add tag and sevicename assetions in TestExporter_ExportSpan
* update assert.Equal to assert.Len and revert CHANGLOG
* update assert.Len to require.Len
* Fix Jaeger span status reporting and unify tag keys
Move all tag key strings to be consts defined in a unified location.
Fix the status code and message tag keys to conform with the
specification.
Do not set the span status message if it is not set to conform with the
specification.
* Add changes to changelog
* Update CHANGELOG.md
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Fix misspell
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Update SpanSnapshot to use parent SpanContext
Having only the parent span ID and a separate field to communicate if
the parent was remote does not provide a comprehensive view of the
parent span nor is it an efficient way to transmit this information.
Update the SpanSnapshot to have a `Parent` field that contains the
parent span context. This field replaces the ParentSpanID and
HasRemoteParent fields.
* Revert SamplingParameters span change
* Update CHANGELOG with PR number
This patch removes `ApplyConfig` method and `Config` struct from
`go.opentelemetry.io/otel/sdk/trace` package. To ensure valid config
for TracerProvider, it adds `ensureValidTracerProviderConfig` private
function.
Jaeger and Zipkin have been used the `Config` directly across package
boundaries. Since `Config` is removed, they can't use it. This change,
thus, replaces `WithSDK` with `WithSDKOptions`.
Resolves#1636, #1705.
* Rename WithDefaultSampler TracerProvider option to WithSampler
The term "DefaultSampler" comes from early ideas of this project where
there would be overriding samplers lower in the trace SDK. This
overriding does not exist and if it is going to be introduced in the
future the sampler associated with the TracerProvider is already scoped
based on that association (no need to scope with a name). This renames
the TracerProvider option to not include this anachronism.
* Update PR number in CHANGELOG
* Propagate rename
* Update defaults documentation for TracerProvider
* Update sdk/trace/provider.go
Co-authored-by: Steven E. Harris <seh@panix.com>
* Update sdk/trace/provider.go
Co-authored-by: Steven E. Harris <seh@panix.com>
* Add remote property to SpanContext
* Set SpanContext.remote when extracting context in TraceContext propagator
* Ensure remote flag is set when inserting remote SpanContext into context
* Ensure tests are expecting remote flag in SpanContext where appropriate
* Update CHANGELOG.md
* Apply PR feedback
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Jaeger exporter now populate Jaeger's Span Process from Resource
* Remove jaeger.WithProcess
* Fix tests
* Change the type of default service name into string
* Add tests
* Update CHANGELOG
* Use the API from `Set` to fetch service name in exporter
* Fix nits
* Add more test cases for jaegerBatchList function
* precommit
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Rename resource pkg label vars and methods
The former `labels` package is now named `attributes` to conform with
the specification requirement. This removes the lingering `label` term
from the `resource` package.
Resolve https://github.com/open-telemetry/opentelemetry-go/issues/1691
* Update PR number in CHANGELOG
* Propagate rename to the prometheus exporter pkg
* Make SpanContext Immutable
* Adds NewSpanContext() constructor and SpanContextConfig{} struct for
constructing a new SpanContext when all fields are known
* Adds With<field>() methods to SpanContext for deriving a SpanContext
with a single field changed.
* Updates all uses of SpanContext to use the new API
Signed-off-by: Anthony J Mirabella <a9@aneurysm9.com>
* Update CHANGELOG.md
Signed-off-by: Anthony J Mirabella <a9@aneurysm9.com>
* Add tests for new SpanContext constructor and derivation
Signed-off-by: Anthony J Mirabella <a9@aneurysm9.com>
* Address PR feedback
* Fix new uses of SpanContext from main
* sdk/trace: add missing options to tracer provider
This change adds `WithDefaultSampler` and `WithSpanLimits` to the tracer
provider and removed `WithConfig` from it.
Before this change, `WithConfig` is the only way to set sampler or
limits of a span. However, it is prone to misuse, since `WithConfig` can
override tracing configurations that are configured by `WithResource` or
`WithIDGenerator`. Thus to fix this, it adds new functional options -
`WithDefaultSampler` and `WithSpanLimits` and removes `WithConfig`.
Resolves#1631.
* Update sdk/trace/provider.go
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Update sdk/trace/provider.go
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* rebase and remove WithConfig
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
to provide consistent naming across the code base, deprecate pusher in
favor of exporter naming convention.
Signed-off-by: ldelossa <ldelossa@redhat.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Set span status code, message and ref types according to the spec
* Serialize array attributes as string
* Use correct lib name / version key
* Add new and adjust existing tests
* Update CHANGELOG
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Add HTTP/JSON to the otlp exporter
Co-Authored-By: Roy van de Water <72016+royvandewater@users.noreply.github.com>
* PR fixup
Co-authored-by: Roy van de Water <72016+royvandewater@users.noreply.github.com>
* Updating documentation with an working example for creating NewExporter
* Updated Changelog
* Moved examples in README to testing example
* ExampleTest shouldn't log anything if working as expected
* Fixing the lint
* Fixing the lint
* Review comments
* Changes done moved to Fixed section of Changelog
* Fix Windows build of Jaeger tests
The Jaeger tests use the low-level syscall package. The Windows specific
function called in that package has a different function signature than
the unix version. Add a windows specific file using the build flags to
isolate this OS specific functionality.
* Add changes to changelog
* Blind succeed to account for unimplemented functionality on Windows
* Fix stdout TestStdoutTimestamp failure with sleep
Ensure the test condition is valid by introducing minimal sleep
durations before and after a timestamp is measured.
Resolves#1571
* Add changes to changelog
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Vendor Thrift dependency
* Fix build
* Changelog entry
* Ignore third_party for coverage purposes
* Re-run tests
* Re-run tests
* Re-run tests
* Re-run tests
* Relax time comparisons
Fixes#1559.
Some unit tests were flaking in CI because they expected the timestamp
to advance during a test, when it's possible for it to be unchanged
instead. This change switches the offending "<" comparisons to "<=".
* Re-run tests
* Relax more time comparisons
* Re-run tests
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Add a tool to auto-generate replace directives
* Auto-generated changes from previous commit
* Create new modules required for trace release
* otel/metric
* otel/trace
* otel/oteltest
* otel/sdk/export/metric
* otel/sdk/metric
Relates to #1467
* Move metric-related public API out of otel/ pkg
Move GetMeterProvider, Meter and SetMeterProvider to new package
otel/metric/global in the otel/metric module.
This will allow otel/ module to be released as v1.0.
* Include PR references in CHANGELOG
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Check for root dir
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Add a Config/Option for histogram
* Just one option here
* Test fixes
* Support and test int64 histograms
* Changelog
* Lint
* Un-export three things.
* Push->basic
* Repackage
* Rename away from push
* Make exporter optional; export from a separate goroutine
* Move pull_test into controller_test
* Precommit pass
* New OTLP/Prom example
* Precommit
* Fix the example
* Shorten the example
* Test starting controller w/o exporter
* Test export timeout
* Remove ancient example & lint
* go.mod revert & tidy
* Comments
* Tidy a diff
* Tidy a diff
* Move export kind selector in the new example
* Split this test into its original parts
* Reduce diff size
* Changelog
* Remove extra Add/Done pair
* Remove unused stopCh param; document the Stop behavior
* Typo
* Use ctx
* Missed v0.15
* Apply PR feedback
* Precommit pass
* 0.14 -> 0.15 in new file
* Remove diff chunk markers
* Fix OTLP example
* Upstream
* dashpole comments
* aneurysm9 feedback
* Tidy go.sum
* Move grpc stuff to separate package
* Drop duplicated retryable status code
* Set default port to 4317
This is what the specification says for both gRPC and HTTP.
* Document gRPC option type
* Add an HTTP protocol driver for OTLP exporter
Currently it supports only binary protobuf payloads.
* Move end to end test to a separate package
It also adds some common code mock collectors can use. This will be
useful for testing the HTTP driver.
* Move export data creators to otlptest
It also extends the one record checkpointer a bit. This will be useful
for testing the HTTP driver.
* Add an HTTP mock collector and tests for HTTP driver
* Update changelog
* Do not depend on DefaultTransport
We create our own instance of the transport, which is based on
golang's DefaultTransport. That way we sidestep the issue of the
DefaultTransport being modified/overwritten. We won't have any panics
at init. The cost of it is to keep the transport fields in sync with
DefaultTransport.
* Read the whole response body before closing it
This may help with connection reuse.
* Change options to conform to our style guide
* Add jitter to backoff time
* Test TLS option
* Test extra headers
* Fix a comment
* Increase coverage
* Add a source of the backoff strategy
* Rename `otlp.WithAddress` to `otlp.WithEndpoint`
* Unify the term of the endpoint from exporter
* Update CHANGELOG
* Update example/otel-collector/main.go
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Switch to the full word collector
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
Co-authored-by: Tyler Yahn <codingalias@gmail.com>
* Add a split protocol driver
This is a wrapper around two other protocol drivers, so it makes it
possible to send traces using a different protocol than the one used
for metrics.
* Add an example and tests for multi GRPC endpoint driver
* Update changelog
* Document the split driver
* Add TraceState to API
* Add tests for TraceState
* Update related tests
- stdout exporter test
- SDK test
* Update OTLP span transform
* Update CHANGELOG
* Change TraceState to struct instead of pointer
- Adjust tests for trace API
- Adjust adjacent parts of codebase (test utils, SDK etc.)
* Add methods to assert equality
- for type SpanContext, if SpanID, TraceID, TraceFlag and TraceState are
equal
- for type TraceState, if entries of both respective trace states are
equal
Signed-off-by: Matej Gera <matejgera@gmail.com>
* Copy values for new TraceState, adjust tests
* Use IsEqualWith in remaining tests instead of assertion func
* Further feedback, minor improvements
- Move IsEqualWith method to be only in test package
- Minor improvements, typos etc.
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Split protocol handling away from exporter
This commits adds a ProtocolDriver interface, which the exporter
will use to connect to the collector and send both metrics and traces
to it. That way, the Exporter type is free from dealing with any
connection/protocol details, as this business is taken over by the
implementations of the ProtocolDriver interface.
The gRPC code from the exporter is moved into the implementation of
ProtocolDriver. Currently it only maintains a single connection,
just as the Exporter used to do.
With the split, most of the Exporter options became actually gRPC
connection manager's options. Currently the only option that remained
to be Exporter's is about setting the export kind selector.
* Update changelog
* Increase the test coverage of GRPC driver
* Do not close a channel with multiple senders
The disconnected channel can be used for sending by multiple
goroutines (for example, by metric controller and span processor), so
this channel should not be closed at all. Dropping this line closes a
race between closing a channel and sending to it.
* Simplify new connection handler
The callbacks never return an error, so drop the return type from it.
* Access clients under a lock
The client may change as a result on reconnection in background, so
guard against a racy access.
* Simplify the GRPC driver a bit
The config type was exported earlier to have a consistent way of
configuring the driver, when also the multiple connection driver would
appear. Since we are not going to add a multiple connection driver,
pass the options directly to the driver constructor. Also shorten the
name of the constructor to `NewGRPCDriver`.
* Merge common gRPC code back into the driver
The common code was supposed to be shared between single connection
driver and multiple connection driver, but since the latter won't be
happening, it makes no sense to keep the not-so-common code in a
separate file. Also drop some abstraction too.
* Rename the file with gRPC driver implementation
* Update changelog
* Sleep for a second to trigger the timeout
Sometimes CI has it's better moments, so it's blazing fast and manages
to finish shutting the exporter down within the 1 microsecond timeout.
* Increase the timeout for shutting down the exporter
One millisecond is quite short, and I was getting failures locally or
in CI:
go test ./... + race in ./exporters/otlp
2020/12/14 18:27:54 rpc error: code = Canceled desc = context canceled
2020/12/14 18:27:54 context deadline exceeded
--- FAIL: TestNewExporter_withMultipleAttributeTypes (0.37s)
otlp_integration_test.go:541: resource span count: got 0, want 1
FAIL
FAIL go.opentelemetry.io/otel/exporters/otlp 5.278s
or
go test ./... + coverage in ./exporters/otlp
2020/12/14 17:41:16 rpc error: code = Canceled desc = context canceled
2020/12/14 17:41:16 exporter disconnected
--- FAIL: TestNewExporter_endToEnd (1.53s)
--- FAIL: TestNewExporter_endToEnd/WithCompressor (0.41s)
otlp_integration_test.go:246: span counts: got 3, want 4
2020/12/14 17:41:18 context canceled
FAIL
coverage: 35.3% of statements in ./...
FAIL go.opentelemetry.io/otel/exporters/otlp 4.753s
* Shut down the providers in end to end test
This is to make sure that all batched spans are actually flushed
before closing the exporter.
* Store span data directly in the span
- Nesting only some of a span's data in a `data` field (with the rest
of the data living direclty in the `span` struct) is confusing.
- export.SpanData is meant to be an immutable *snapshot* of a span,
not the "authoritative" state of the span.
- Refactor attributesMap.toSpanData into toKeyValue and make it
return a []label.KeyValue which is clearer than modifying a struct
passed to the function.
- Read droppedCount from the attributesMap as a separate operation
instead of setting it from within attributesMap.toSpanData.
- Set a span's end time in the span itself rather than in the
SpanData to allow reading the span's end time after a span has
ended.
- Set a span's end time as soon as possible within span.End so that
we don't influence the span's end time with operations such as
fetching span processors and generating span data.
- Remove error handling for uninitialized spans. This check seems to
be necessary only because we used to have an *export.SpanData field
which could be nil. Now that we no longer have this field I think we
can safely remove the check. The error isn't used anywhere else so
remove it, too.
* Store parent as trace.SpanContext
The spec requires that the parent field of a Span be a Span, a
SpanContext or null.
Rather than extracting the parent's span ID from the trace.SpanContext
which we get from the tracer, store the trace.SpanContext as is and
explicitly extract the parent's span ID where necessary.
* Add ReadOnlySpan interface
Use this interface instead of export.SpanData in places where reading
information from a span is necessary. Use export.SpanData only when
exporting spans.
* Add ReadWriteSpan interface
Use this interface instead of export.SpanData in places where it is
necessary to read information from a span and write to it at the same
time.
* Rename export.SpanData to SpanSnapshot
SpanSnapshot represents the nature of this type as well as its
intended use more accurately.
Clarify the purpose of SpanSnapshot in the docs and emphasize what
should and should not be done with it.
* Rephrase attributesMap doc comment
"refreshes" is wrong for plural ("updates").
* Refactor span.End()
- Improve accuracy of span duration. Record span end time ASAP. We
want to measure a user operation as accurately as possible, which
means we want to mark the end time of a span as soon as possible
after span.End() is called. Any operations we do inside span.End()
before storing the end time affect the total duration of the span,
and although these operations are rather fast at the moment they
still seem to affect the duration of the span by "artificially"
adding time between the start and end timestamps. This is relevant
only in cases where the end time isn't explicitly specified.
- Remove redundant idempotence check. Now that IsRecording() is based
on the value of span.endTime, IsRecording() will always return
false after span.End() had been called because span.endTime won't
be zero. This means we no longer need span.endOnce.
- Improve TestEndSpanTwice so that it also ensures subsequent calls
to span.End() don't modify the span's end time.
* Update changelog
Co-authored-by: Tyler Yahn <codingalias@gmail.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* chore(zipkin-exporter): relay on the status code for the request but still read the response body.
* fix(zipkin-exporter): fix tests.
* chore(zipkin-exporter): adds changelog.
* chore: 202 -> http.StatusAccepted
Co-authored-by: Chris Bandy <bandy.chris@gmail.com>
* chore: 202 -> http.StatusAccepted
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
Co-authored-by: Chris Bandy <bandy.chris@gmail.com>
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Move connection logic into grpcConnection object
If we will need to maintain more than one connection in future, this
splitting off will come in handy.
Co-authored-by: Stefan Prisca <stefan.prisca@gmail.com>
* Make another channel a signal channel
There is another channel that serves as a one-time signal, where
channel's data type does not matter.
* Reorder and document connection members
This is to make clear that the lock is guarding only the connection
since it can be changed by multiple goroutines, and other members are
either atomic or read-only.
* Move stop signal into connection
The stop channel was rather useless on the exporter side - the primary
reason for existence of this channel is to stop a background
reconnecting goroutine. Since the goroutine lives entirely within
grpcConnection object, move the stop channel here. Also expose a
function to unify the stop channel with the context cancellation, so
exporter can use it without knowing anything about stop channels.
Also make export functions a bit more consistent.
* Do not run reconnection routine when being stopped too
It's possible that both disconnected channel and stop channel will be
triggered around the same time, so the goroutine is as likely to start
reconnecting as to return from the goroutine. Make sure we return if
the stop channel is closed.
* Nil clients on connection error
Set clients to nil on connection error, so we don't try to send the
data over a bad connection, but return a "no client" error
immediately.
* Do not call new connection handler within critical section
It's rather risky to call a callback coming from outside within a
critical section. Move it out.
* Add context parameter to connection routines
Connecting to the collector may also take its time, so it can be
useful in some cases to pass a context with a deadline. Currently we
just pass a background context, so this commit does not really change
any behavior. The follow-up commits will make a use of it, though.
* Add context parameter to NewExporter and Start
It makes it possible to limit the time spent on connecting to the
collector.
* Stop connecting on shutdown
Dialling to grpc service ignored the closing of the stop channel, but
this can be easily changed.
* Close connection after background is shut down
That way we can make sure that there won't be a window between closing
a connection and waiting for the background goroutine to return, where
the new connection could be established.
* Remove unnecessary nil check
This member is never nil, unless the Exporter is created like
&Exporter{}, which is not a thing we support anyway.
* Update changelog
Co-authored-by: Stefan Prisca <stefan.prisca@gmail.com>
* Drop WorkerCount option
This is not a good option - the user isn't likely to know how many
worker goroutines is optimal. This should be something that an
exporter should figure out itself. The second problem with the option
is that it is specific to the metric transformation from SDK export
format into protobuf. When the exporter starts supporting other
protocols (HTTP/JSON for example), this option may be of no use. So
the option should rather belong to the protocol, not to the
exporter. Currently both mean the same, but later they will be
separated, and this option breaks the separation.
* Make stop channel a typical signalling channel
Signalling channels are idiomatically defined as chan struct{}, so
let's make it so, to avoid confusion about the meaning of the bool
type.
* Close a race when grpc connection is closed multiple times
If several goroutines call Shutdown at the same time, then the
following scenario is possible:
goroutine A locks a mutex, reads a started member, unlocks the mutex
and gets preempted
goroutine B locks a mutex, reads a started member, unlocks the mutex
and gets preempted
goroutine A does not return early in the "if !started" conditional and
continues to close the connection and execute the rest of the function
(where it finally sets the started member to false), gets preempted
goroutine B also does not return early, because it got a copy of
started before goroutine A set it to false, so it tries to close the
connection again.
* Update changelog
* support exact kind in OTLP metrics exporter
* add change log
* rename function
* inline start time and end time variables
* fix test
* add test for exact int data points
* add test for exact float data points
* use newly introduced number package for numbers according to upstream change
* fix package ref
* Move global code to toplevel package
* Move version function to toplevel package
* Update changelog
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Move registry package under metric
* Move Number type to the metric/number subpackage
This also renames NumberKind type to Kind.
* Update changelog
* Drop outdated comment
* Export non monotonic counters as gauge values from the prometheus exporter
* Add a test to ensure the pre-existing LastValue pathway on the collector exports the last value
* Add a TODO around refactoring the prometheus test to verify metadata as well
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Update README
Move project status to top of project documentation and add explicit
warnings that this project may introduce breaking changes.
* Add disclaimer to public packages docs
* Use explicit warning in README
* Add a Shutdown method to api TraceProvider
- sdktraceprovider shutdown span processors
- In examples, replace processosr shutdown with
traceprovider's shutdown
Signed-off-by: Hui Kang <kangh@us.ibm.com>
* remove shutdown in the api provider interface
* Add context in parameter and return error
* handle error in shutdown
* Update CHANGELOG.md
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Update metric Kind to InstrumentKind
* Update all the other modules with Kind rename
* Update metric Descriptor with instrument Kind rename
* Update other modules with Descriptor method rename
* Update OTLP exporter test field name
* Rename kind filenames
* Add changes to CHANGELOG
* Fix documentation for Grouping and PrecomputedSum
* Rename meter.go to metric.go
* Move descriptor.go into metric.go
* Move must.go into metric.go
* Move instruments into metric_instrument.go
* Rename metric api_test.go to metric_test.go
* Move instrumentkind_test.go into metric_test.go
* Rename sdkapi.go metric_sdkapi.go
* Move api/metric into otel
* Update to use moved packages
* Rename otel.go to error_handler.go
* Add changes to CHANGELOG
* Fix merge conflict resolution error
* Update metric Kind to InstrumentKind
* Update all the other modules with Kind rename
* Update metric Descriptor with instrument Kind rename
* Update other modules with Descriptor method rename
* Update OTLP exporter test field name
* Rename kind filenames
* Add changes to CHANGELOG
* Fix documentation for Grouping and PrecomputedSum
* Update documentation for the OTLP exporter
Update package documentation to reflect the contents of the package.
Fix lint issues by adding documentation for all exported types.
Update file comment location in otlp.go so golint does not interpret it
as package documentation.
* Apply suggestions from code review
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Updating version of OTLP to 0.5.0
* updating trace transform to use latest protos
* update otlp span test
* forgot one test
* finishing the rest of the implementation
In this change:
- MetricDescriptor is no longer a member of the metric
- splitting Sum, Gauge, Histogram by Int/Float
- SummaryDataPoints are no longer around, MinMaxSumCount is now a Histogram
* update changelog
* Update CHANGELOG.md
Move changes to the Unreleased section. This is to account for the recent release.
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Move trace API to otel
* Move tracetest to oteltest
* Update package documentation
* Remove old api/trace package
* Lint
* Add changes to CHANGELOG
* Add tests for rest of trace API
* Apply suggestions from code review
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Documentation fixes
Includes resolutions for review issues.
* Correct CHANGELOG post release
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Update label.ArrayValue to store copies of 1D arrays
* Update OTLP transform of array attributes
* Add changes to CHANGELOG
* Add PR number to changes
* Update value function documentation
* Remove redundant checks
* Add Array test for invalid array types
* Add test to ensure return from AsArray is a type
* Clean up iteration
* Update codes to match specification
* Add changes to changelog
* go mod tidy
* Add unit tests for codes
* Update SetStatus methods to only filter Unset
* Update apitest code being tested
* Rename *Provider names
There is overlap in naming with MeterProviders and TracerProviders. This
is means the specification is not implemented and these types can not
exist in the same package (#1179). This makes each type and related
functions and types explicit.
* Add changes to CHANGELOG
* Update trace export interface
Move to conforming to the specification.
* Update documentation in export trace
* Update sdk trace provider to support new trace exporter
* Update SpanProcessors
Support the Provider changes and new trace exporter.
* Update the SDK to support the changes
* Update trace Provider to not return an error
* Update sdk with new Provider return
Also fix the testExporter ExportSpans method
* Update exporters with changes
* Update examples with changes
* Update Changelog
* Move error handling to end of shutdown
* Update exporter interface
Rename to SpanExporter to match specification. Add an error return value
to the Shutdown method based on feedback. Propagate these changes.
Remove the Stop method from the OTLP exporter to avoid confusion and
redundancy.
* Add test to check OTLP Shutdown honors context
* Add Jaeger exporter test for shutdown
* Fix race in Jaeger test
* Unify shutdown behavior and testing
* Update sdk/trace/simple_span_processor.go
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Unexport NoopXXX trace types
The change unexports the noop implementations and provide the NoopProvider function for user to construct noop providers. Users can access noop tracer and noop spans by using the provider.
This change removes the types users should never be directly using from the package. It improves the usability of the API by reducing the API surface to half and helping the user to focus on the canonical APIs.
Fixes#1133
* Provide noop tracer and span for internal use
* Remove obsolete doc
* Use noop span instead of nil
* Fix the broken build
* port reconnecting udp client from jaeger-client-go
* Fix precommit issues
* Fix license check
* Add initial value for max packet size
* Fix for atomic usage on 386 arch
* Modify reconnecting option to an affirmative
* Add changelog entry
* Dont hold rlock for writes
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Move proto to OTLP exporter
* Update OTLP exporter import of proto
* Use gogo protobuf
To stop using the deprecated github.com/golang/protobuf and match what
the collector is doing, switch to generating OTLP with the
github.com/gogo/protobuf/proto instead of
github.com/golang/protobuf/proto.
* Clean dependencies
Remove all protobuf dependencies from otel package and all of its
dependencies.
* Update CHANGELOG
* Clean OTLP exporter go mod
Remove submodule beforehand to avoid unneeded direct dependencies.
* Use default ref for GitHub workflow
* Update path that triggers proto gen action
* Correct license-check exclusion for OTLP
* Update commented location of the OTLP and code
* Clean stale indirect dependency requirements
In the recent changes to isolate the main `otel` package there were many
indirect dependencies of the package that were removed, however, the
go.mod was not automatically cleaned of these. This removes those (and
similar ones in the otel-collector example and otel exporter) and prunes
the go.sum files accordingly.
* Run in a clean system to reproduce build
* Make opentracing bridge into own Go module
* Update dependabot config
* Clean dependencies of project
Now the bridge is a module, clean all upstream modules that no longer
implicitly depend on it.
* Update Changelog
* go mod tidy
* Fix instrumentation lib version in spanDataToThrift
* Update CHANGELOG.md
* Use test value for lib version in accordance with the spec
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Add int array attribute support
* Export int32, int64 and bool arrays
* Export all other array attributes
* Remove array test case from simple attr test
* Addressed feedback
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
http.ResponseWriters may implement additional interfaces
(http.CloseNotifier, http.Flusher, http.Hijacker, http.Pusher,
io.ReaderFrom) that get lost when the ResponseWriter is wrapped in
another object. This change uses the httpsnoop package to wrap the
ResponseWriter so that the resulting object implements any of the
optional interfaces that the original ResponseWriter implements as
well as using the replacement ResponseWriter methods that gather
information for tracing.
* Remove otel/sdk dependency from grpctrace
Use otel/trace/testtrace instead and cleanup testing code.
* Update httptrace to not depend on the SDK
Update testing to use api/trace/testtrace instead.
* Add changes to Changelog
* Make the SDK its own Go module
* Upgrade go.mod to 1.14 project wide
* go mod tidy
* Make the stdout exporter its own package
Follow the pattern of the other exporters.
* Update dependabot with stdout exporter
* Add replace directives for stdout exporter
* Remove outdated example test from metric SDK
* go mod tidy
* Update othttp example test
Remove unused stdout exporter.
* Remove tests in API that depend on stdout exporter
The global package does not need to be validated with the SDK. A more
properly constructed end-to-end integration test should be built if this
is actually needed.
* Add replace clause for otel in stdout go.mod
* Consolidate stdout exporter
* Move config to own file and match project standard
* Abstract Exporter into unified struct
* Rename trace part of the exporter
* Update import paths and configuration
* Update tests
* Update InstallNewPipeline to not return traceProvider
It is a registered global, access it that way.
* Update example_test
* Update docs
* Update example to be for whole package
* Update metric output
Closer match the span output.
* Clean up span output
Print as a batch and cleanup marshaling.
* Correct spelling error in doc
* Add Exporters README
* Update Changelog
* Propagate changes to rest of project
* Lint fixes
* Fix example test in metric SDK
* Add disable config options for trace and metric
Co-authored-by: Liz Fong-Jones <lizf@honeycomb.io>
* Adjust Jaeger and Zipkin exporters helper methods
* Update and add tests, examples, various minor improvements
* Update changelog
* Correct the Zipkin example
- wait for the spans to be exported
- rebuild the example
* Zipkin service name as argument
* Rework Jaeger and Zipkin tests
* Include more detailed Changelog
Co-authored-by: ET <evantorrie@users.noreply.github.com>
Co-authored-by: Liz Fong-Jones <lizf@honeycomb.io>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
Currently there is no way to report errors using the global handlers for spans in the OTLP exporter, this change fixes that. Errors for the metrics exporter are already handled by the global handler.
Co-authored-by: Liz Fong-Jones <lizf@honeycomb.io>
* Import open-telemetry/opentelemetry-proto submodule under internal
* Commit changes in updated/new protobuf files
* Refer to new location of .pb.go files after rewrite from import
* Describe in CHANGELOG
* Avoid applying stale udpates; add a test
* Add Memory option to basic processor
* Always use memory in the pull controller
* Test the memory option
* Precommit
* Add a Prometheus-specific test
* More comment on Memory option
* Link to 862
* Remove sleep
* Update changelog
* Comment on stale and stateless aggregators
* Update sdk/metric/processor/basic/config.go
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
Co-authored-by: Liz Fong-Jones <lizf@honeycomb.io>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Update OTLP to v0.4.0
* Update attribute transforms to use new KeyValue
* Update metric transforms
The labels are no longer included in the MetricDescriptor
Use new types.
* Fix OTLP integration tests
* Update example otel-collector go.sum
* Update metric integration testing
* Fix type error introduced in conflict resolution
* Deep clean of go.sum
Recreate go.sum for otel-collector example and OTLP exporter.
fixes#851
This includes all of the associated methods, such as
AsUint64, AsUint64Atomic, AsUint64Ptr, CoerceToUint64, SetUint64
SetUint64Atomic, SwapUint64, SwapUint64Atomic, AddUint64,
AddUint64Atomic, CompamreAndSwapUint64, CompareUint64
Only significant change as a result was converting the histogram
aggregator's `count` state field into an int64 from a `metric.Number`.
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
