"- Camera: to allow taking a picture and attaching it to a note.":[
""
],
"- Location: to allow attaching geo-location information to a note.":[
""
],
"- Storage: to allow attaching files to notes and to enable filesystem synchronisation.":[
""
],
"<tag-command> can be \"add\", \"remove\", \"list\", or \"notetags\" to assign or remove [tag] from [note], to list notes associated with [tag], or to list tags associated with [note]. The command `tag list` can be used to list all the tags (use -l for long option).":[
""
],
"<todo-command> can either be \"toggle\" or \"clear\". Use \"toggle\" to toggle the given to-do between completed and uncompleted state (If the target is a regular note it will be converted to a to-do). Use \"clear\" to convert the to-do back to a regular note.":[
"Any email sent to this address will be converted into a note and added to your collection. The note will be saved into the Inbox notebook":[
""
],
"Appearance":[
""
],
"Application":[
""
],
"Apply":[
""
],
"Are you sure you want to renew the authorisation token?":[
""
],
"Are you sure you want to return to the default layout? The current layout configuration will be lost.":[
""
],
"Arguments:":[
""
],
"Aritim Dark":[
""
],
"Attach":[
""
],
"Attach file":[
""
],
"Attach photo":[
""
],
"Attach...":[
""
],
"Attaches the given file to the note.":[
""
],
"attachment":[
""
],
"Attachment conflict: \"%s\"":[
""
],
"Attachment download behaviour":[
""
],
"Attachments":[
""
],
"Attachments that could not be downloaded":[
""
],
"Attention: If you change this location, make sure you copy all your content to it before syncing, otherwise all files will be removed! See the FAQ for more details: %s":[
""
],
"Authentication was not completed (did not receive an authentication token).":[
"Biometric unlock is not setup on the device. Please set it up in order to unlock Joplin. If the device is on lockout, consider switching it off and on to reset biometrics scanning.":[
"Cannot load \"%s\" module for format \"%s\" and output \"%s\"":[
""
],
"Cannot load \"%s\" module for format \"%s\" and target \"%s\"":[
""
],
"Cannot move note to \"%s\" notebook":[
""
],
"Cannot move notebook to this location":[
""
],
"Cannot refresh token: authentication data is missing. Starting the synchronisation again may fix the problem.":[
""
],
"Cannot save %s \"%s\" because it is larger than the allowed limit (%s)":[
""
],
"Cannot save %s \"%s\" because it would go over the total allowed size (%s) for this account":[
""
],
"Cannot share encrypted notebook with recipient %s because they have not enabled end-to-end encryption. They may do so from the screen Configuration > Encryption.":[
"Click \"%s\" to restore the note. It will be copied in the notebook named \"%s\". The current version of the note will not be replaced or modified.":[
"Close the application, then delete your profile in \"%s\", and start the application again. Make sure you create a backup first by exporting all your notes as JEX.":[
"Comma-separated list of paths to directories to load the certificates from, or path to individual cert files. For example: /my/cert_dir, /other/custom.pem. Note that if you make changes to the TLS settings, you must save your changes before clicking on \"Check synchronisation configuration\".":[
"Deletes the notebook without asking for confirmation.":[
""
],
"Deletes the notes matching <note-pattern>.":[
""
],
"Deletes the notes without asking for confirmation.":[
""
],
"Destination format: %s":[
""
],
"Detailed":[
""
],
"Directory":[
""
],
"Directory to synchronise with (absolute path)":[
""
],
"Disable":[
""
],
"Disable encryption":[
""
],
"Disable safe mode and restart":[
""
],
"Disable Web Clipper Service":[
""
],
"Disabled":[
""
],
"Disabling encryption means *all* your notes and attachments are going to be re-synchronised and sent unencrypted to the sync target. Do you wish to continue?":[
""
],
"Discard":[
""
],
"Discard changes":[
""
],
"Dismiss":[
""
],
"Displays a geolocation URL for the note.":[
""
],
"Displays only the first top <num> notes.":[
""
],
"Displays only the items of the specific type(s). Can be `n` for notes, `t` for to-dos, or `nt` for notes and to-dos (eg. `-tt` would display only the to-dos, while `-tnt` would display notes and to-dos.":[
""
],
"Displays summary about the notes and notebooks.":[
""
],
"Displays the complete information about note.":[
""
],
"Displays the given note.":[
""
],
"Displays the notes in the current notebook. Use `ls /` to display the list of notebooks.":[
""
],
"Displays usage information.":[
""
],
"Displays version information":[
""
],
"Do it now":[
""
],
"Do not ask for confirmation.":[
""
],
"Do not lose the password as, for security purposes, this will be the *only* way to decrypt the data! To enable encryption, please enter your password below.":[
"Gets or sets a config value. If [value] is not provided, it will show the value of [name]. If neither [name] nor [value] is provided, it will list the current configuration.":[
"In \"Manual\" mode, attachments are downloaded only when you click on them. In \"Auto\", they are downloaded when you open the note. In \"Always\", all the attachments are downloaded whether you open the note or not.":[
""
],
"In any command, a note or notebook can be referred to by title or ID, or using the shortcuts `$n` or `$b` for, respectively, the currently selected note or notebook. `$c` can be used to refer to the currently selected item.":[
""
],
"In order to associate a geo-location with the note, the app needs your permission to access your location.\n\nYou may turn off this option at any time in the Configuration screen.":[
""
],
"In order to do so, your entire data set will have to be encrypted and synchronised, so it is best to run it overnight.\n\nTo start, please follow these instructions:\n\n1. Synchronise all your devices.\n2. Click \"%s\".\n3. Let it run to completion. While it runs, avoid changing any note on your other devices, to avoid conflicts.\n4. Once sync is done on this device, sync all your other devices and let it run to completion.\n\nImportant: you only need to run this ONCE on one device.":[
"Joplin failed to decrypt these items multiple times, possibly because they are corrupted or too large. These items will remain on the device but Joplin will no longer attempt to decrypt them.":[
"Lock file is already being hold. If you know that no synchronisation is taking place, you may delete the lock file at \"%s\" and resume the operation.":[
"Notebooks cannot be named \"%s\", which is a reserved title.":[
""
],
"Notes":[
""
],
"Notes and settings are stored in: %s":[
""
],
"Notes can only be created within a notebook.":[
""
],
"Numbered List":[
""
],
"OK":[
""
],
"OLED Dark":[
""
],
"On %s: %s":[
""
],
"One of your master keys use an obsolete encryption method.":[
""
],
"One or more items are currently encrypted and you may need to supply a master password. To do so please type `e2ee decrypt`. If you have already supplied the password, the encrypted items are being decrypted in the background and will be available soon.":[
"Please click on \"%s\" to proceed, or set the passwords in the \"%s\" list below.":[
""
],
"Please confirm that you would like to re-encrypt your complete database.":[
""
],
"Please enter your password in the master key list below before upgrading the key.":[
""
],
"Please note that if it is a large notebook, it may take a few minutes for all the notes to show up on the recipient's device.":[
""
],
"Please open the following URL in your browser to authenticate the application. The application will create a directory in \"Apps/Joplin\" and will only read and write files in this directory. It will have no access to any files outside this directory nor to any other personal data. No data will be shared with any third party.":[
""
],
"Please record your voice...":[
""
],
"Please select a notebook first.":[
""
],
"Please select the note or notebook to be deleted first.":[
""
],
"Please select where the sync status should be exported to":[
""
],
"Please specify import format for %s":[
""
],
"Please specify the notebook where the notes should be imported to.":[
"The active profile cannot be deleted. Switch to a different profile and try again.":[
""
],
"The app is now going to close. Please relaunch it to complete the process.":[
""
],
"The application did not close properly. Would you like to start in safe mode?":[
""
],
"The application has been authorised - you may now close this browser tab.":[
""
],
"The application has been authorised!":[
""
],
"The application has been successfully authorised.":[
""
],
"The application must be restarted for these changes to take effect.":[
""
],
"The attachments will no longer be watched when you switch to a different note.":[
""
],
"The command \"%s\" is only available in GUI mode":[
""
],
"The default admin password is insecure and has not been changed! [Change it now](%s)":[
""
],
"The default encryption method has been changed to a more secure one and it is recommended that you apply it to your data.":[
""
],
"The default encryption method has been changed, you should re-encrypt your data.":[
""
],
"The default profile cannot be deleted":[
""
],
"The editor command (may include arguments) that will be used to open a note. If none is provided it will try to auto-detect the default editor.":[
""
],
"The factor property sets how the item will grow or shrink to fit the available space in its container with respect to the other items. Thus an item with a factor of 2 will take twice as much space as an item with a factor of 1.Restart app to see changes.":[
"The following attachments are being watched for changes:":[
""
],
"The following keys use an out-dated encryption algorithm and it is recommended to upgrade them. The upgraded key will still be able to decrypt and encrypt your data as usual.":[
""
],
"The Joplin mobile app does not currently support this type of link: %s":[
""
],
"The Joplin team has vetted this plugin and it meets our standards for security and performance.":[
""
],
"The keys with these IDs are used to encrypt some of your items, however the application does not currently have access to them. It is likely they will eventually be downloaded via synchronisation.":[
""
],
"The master key has been upgraded successfully!":[
""
],
"The master keys with these IDs are used to encrypt some of your items, however the application does not currently have access to them. It is likely they will eventually be downloaded via synchronisation.":[
""
],
"The note \"%s\" has been successfully restored to the notebook \"%s\".":[
"The sync target cannot be changed for the following reason: %s\n\nIf the issue cannot be resolved, you may need to clear your data first by following these instructions:\n\n%s":[
"The sync target needs to be upgraded before Joplin can sync. The operation may take a few minutes to complete and the app needs to be restarted. To proceed please click on the link.":[
""
],
"The sync target needs to be upgraded. Press this banner to proceed.":[
""
],
"The synchronisation password is missing.":[
""
],
"The tag \"%s\" already exists. Please choose a different name.":[
""
],
"The target to synchronise to. Each sync target may have additional parameters which are named as `sync.NUM.NAME` (all documented below).":[
""
],
"The Web Clipper needs your authorisation to access your data.":[
""
],
"The web clipper service is enabled and set to auto-start.":[
""
],
"The web clipper service is not enabled.":[
""
],
"The WebDAV implementation of %s is incompatible with Joplin, and as such is no longer supported. Please use a different sync method.":[
"These items failed to sync, but have been marked as \"ignored\". They won't cause the sync warning to appear, but still aren't synced. To unignore, click \"retry\".":[
"These items will remain on the device but will not be uploaded to the sync target. In order to find these items, either search for the title or the ID (which is displayed in brackets above).":[
""
],
"These plugins enhance the Markdown renderer with additional features. Please note that, while these features might be useful, they are not standard Markdown and thus most of them will only work in Joplin. Additionally, some of them are *incompatible* with the WYSIWYG editor. If you open a note that uses one of these plugins in that editor, you will lose the plugin formatting. It is indicated below which plugins are compatible or not with the WYSIWYG editor.":[
""
],
"This allows another user to share a notebook with you, and you can then both collaborate on it. It does not however allow you to share a notebook with someone else, unless you have the feature \"%s\".":[
"This attachment is not downloaded or not decrypted yet":[
""
],
"This attachment is not downloaded or not decrypted yet.":[
""
],
"This authorisation token is only needed to allow third-party applications to access Joplin.":[
""
],
"This drawing may have unsaved changes.":[
""
],
"This is an advanced tool to show the attachments that are linked to your notes. Please be careful when deleting one of them as they cannot be restored afterwards.":[
""
],
"This note could not be deleted: %s":[
"",
""
],
"This note could not be duplicated: %s":[
"",
""
],
"This note could not be moved: %s":[
"",
""
],
"This note does not have geolocation information.":[
""
],
"This note has been modified:":[
""
],
"This note has no content. Click on \"%s\" to toggle the editor and edit the note.":[
"This Rich Text editor has a number of limitations and it is recommended to be aware of them before using it.":[
""
],
"This service allows the browser extension to communicate with Joplin. When enabling it your firewall may ask you to give permission to Joplin to listen to a particular port.":[
"This will allow Joplin to run in the background. It is recommended to enable this setting so that your notes are constantly being synchronised, thus reducing the number of conflicts.":[
""
],
"This will open a new screen. Save your current changes?":[
"Type `help [command]` for more information about a command; or type `help all` for the complete usage information.":[
""
],
"Type `joplin help` for usage information.":[
""
],
"Type a note title or part of its content to jump to it. Or type # followed by a tag name, or @ followed by a notebook name. Or type : to search for commands.":[
"Upgrade the sync target to the latest version.":[
""
],
"URL":[
""
],
"Usage: %s":[
""
],
"Use biometrics to secure access to the app":[
""
],
"Use long list format. Format is ID, NOTE_COUNT (for notebook), DATE, TODO_CHECKED (for to-dos), TITLE":[
""
],
"Use spell checker":[
""
],
"Use the arrows and page up/down to scroll the lists and text areas (including this console).":[
""
],
"Use the arrows to move the layout items. Press \"Escape\" to exit.":[
""
],
"Use this to rebuild the search index if there is a problem with search. It may take a long time depending on the number of notes.":[
""
],
"Use your biometrics to secure access to your application. You can always set it up later in Settings.":[
""
],
"Used for most text in the markdown editor. If not found, a generic proportional (variable width) font is used.":[
""
],
"Used where a fixed width font is needed to lay out text legibly (e.g. tables, checkboxes, code). If not found, a generic monospace (fixed width) font is used.":[
"Welcome to Joplin!\n\nType `:help shortcuts` for the list of keyboard shortcuts, or just `:help` for usage information.\n\nFor example, to create a notebook press `mb`; to create a note press `mn`.":[
"When enabled, the application will scan your attachments and extract the text from it. This will allow you to search for text in these attachments.":[
"You may also type `status` for more information.":[
""
],
"You may use the tool below to re-encrypt your data, for example if you know that some of your notes are encrypted with an obsolete encryption method.":[
