Previously, all link-time dependencies were added for all libraries,
resulting in bogus link-time dependencies since not all dependencies
are shared across libraries. Also, in some cases like libavutil, not
all dependencies were taken into account, resulting in some cases of
underlinking.
To address all this mess a machinery is added for tracking which
dependency belongs to which library component and then leveraged
to determine correct dependencies for all individual libraries.
Supporting the system was a nice joke for the 9 release, but it has
run its course. Nowadays Plan 9 receives no testing and has no
practical usefulness.
This work is sponsored by, and copyright, Google.
Previously all subpartitions except the eob=1 (DC) case ran with
the same runtime:
Cortex A7 A8 A9 A53
vp9_inv_dct_dct_16x16_sub16_add_neon: 3188.1 2435.4 2499.0 1969.0
vp9_inv_dct_dct_32x32_sub32_add_neon: 18531.7 16582.3 14207.6 12000.3
By skipping individual 4x16 or 4x32 pixel slices in the first pass,
we reduce the runtime of these functions like this:
vp9_inv_dct_dct_16x16_sub1_add_neon: 274.6 189.5 211.7 235.8
vp9_inv_dct_dct_16x16_sub2_add_neon: 2064.0 1534.8 1719.4 1248.7
vp9_inv_dct_dct_16x16_sub4_add_neon: 2135.0 1477.2 1736.3 1249.5
vp9_inv_dct_dct_16x16_sub8_add_neon: 2446.7 1828.7 1993.6 1494.7
vp9_inv_dct_dct_16x16_sub12_add_neon: 2832.4 2118.3 2266.5 1735.1
vp9_inv_dct_dct_16x16_sub16_add_neon: 3211.7 2475.3 2523.5 1983.1
vp9_inv_dct_dct_32x32_sub1_add_neon: 756.2 456.7 862.0 553.9
vp9_inv_dct_dct_32x32_sub2_add_neon: 10682.2 8190.4 8539.2 6762.5
vp9_inv_dct_dct_32x32_sub4_add_neon: 10813.5 8014.9 8518.3 6762.8
vp9_inv_dct_dct_32x32_sub8_add_neon: 11859.6 9313.0 9347.4 7514.5
vp9_inv_dct_dct_32x32_sub12_add_neon: 12946.6 10752.4 10192.2 8280.2
vp9_inv_dct_dct_32x32_sub16_add_neon: 14074.6 11946.5 11001.4 9008.6
vp9_inv_dct_dct_32x32_sub20_add_neon: 15269.9 13662.7 11816.1 9762.6
vp9_inv_dct_dct_32x32_sub24_add_neon: 16327.9 14940.1 12626.7 10516.0
vp9_inv_dct_dct_32x32_sub28_add_neon: 17462.7 15776.1 13446.2 11264.7
vp9_inv_dct_dct_32x32_sub32_add_neon: 18575.5 17157.0 14249.3 12015.1
I.e. in general a very minor overhead for the full subpartition case due
to the additional loads and cmps, but a significant speedup for the cases
when we only need to process a small part of the actual input data.
In common VP9 content in a few inspected clips, 70-90% of the non-dc-only
16x16 and 32x32 IDCTs only have nonzero coefficients in the upper left
8x8 or 16x16 subpartitions respectively.
Signed-off-by: Martin Storsjö <martin@martin.st>
This reverts commit 81d7f0bbca.
Instead of just benchmarking dc separately, test all relevant subparts
(in the next commit).
Signed-off-by: Martin Storsjö <martin@martin.st>
The dc-only mode is already checked to work correctly above, but this
allows benchmarking this mode for performance tuning, and allows making
sure that it actually is correctly hooked up.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes it match the pattern already used for VP8 MC functions.
This also makes the signature match ffmpeg's version of these
functions, easing porting of code in both directions.
Signed-off-by: Martin Storsjö <martin@martin.st>
x29 (FP) is a callee saved register and should be restored on
return. Instead of backing up x29 and restoring it here, back up
sp in a register that we are allowed to overwrite.
This fixes crashes in checkasm on aarch64 since f1b3e13138.
For some reason, gcc builds didn't crash, but clang builds do.
Signed-off-by: Martin Storsjö <martin@martin.st>
This, combined with clobbering the stack space prior to the call,
increases the chances of finding cases where 32 bit parameters
are erroneously treated as 64 bit.
Signed-off-by: Martin Storsjö <martin@martin.st>
Even if MAX_ARGS - 2 (for arm) or MAX_ARGS - 7 (for aarch64) parameters
are passed on the stack to checkasm_checked_call, we actually only
need to store MAX_ARGS - 4 (for arm) or MAX_ARGS - 8 (for aarch64)
parameters on the stack when calling the tested function.
Signed-off-by: Martin Storsjö <martin@martin.st>
The randomize_buffer() implementation assures that "most of the time",
we'll do a good mix of wide16/wide8/hev/regular/no filters for complete
code coverage. However, this is not mathematically assured because that
would make the code either much more complex, or much less random.
Some fixes and improvements by Rodger Combs <rodger.combs@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
When targeting COFF (windows), clang doesn't support this
directive (while binutils supports it for all targets).
Signed-off-by: Martin Storsjö <martin@martin.st>
These bits are set by exceptions in NEON instructions.
Also print the differing bits when FPSCR is clobbered,
and use bic instead of lsl, for clearing the topmost bits.
Signed-off-by: Martin Storsjö <martin@martin.st>
Each const block needs to be terminated by one endconst
invocation so either call endconst after each, or just
declare plain labels to the later strings.
This fixes errors such as this, on some binutils versions:
checkasm.S:38: Error: Macro `endconst' was already defined
Signed-off-by: Martin Storsjö <martin@martin.st>
The stack used by checkasm_checked_call_vfp was a multiple of 4 when the
checked function is called. AAPCS requires a double word (8 byte)
aligned stack public interfaces. Since both calls are public interfaces
the stack is misaligned when the checked is called.
Might fix the SIGBUS error in the armv7-linux-clang-3.7 fate config.
This avoids listing the same feature multiple times in the
test output. Previously the output contained something like this:
SSE2:
- hevc_mc.qpel [OK]
- hevc_mc.epel [OK]
- hevc_mc.unweighted_pred [OK]
- hevc_mc.qpel [OK]
- hevc_mc.epel [OK]
- hevc_mc.unweighted_pred [OK]
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids the risk of accidentally clobbering such variables outside
of the macro if the same variables are used there.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes valgrind warnings about conditional jumps based on
uninitialized data (even though the uninitialized data only ever
was compared with a direct copy of the same uninitialized data).
Signed-off-by: Martin Storsjö <martin@martin.st>
The functions may not clean up properly after using MMX
registers. For the normal testing calls, the checkasm_checked_call
functions will do the cleanup (and check that functions that
should clean up do it as well), but when benchmarking functions
that don't clean up, we don't currently properly clean up at all.
This causes issues if a benchmarked function is followed by testing
of a function that is supposed to not clobber the MMX/FPU state but
doesn't touch it at all.
Signed-off-by: Martin Storsjö <martin@martin.st>
Restore alphabetical order in lists, break overly long lines, do some
prettyprinting, add some explanatory section comments, group parts
together that belong together logically.
Some debuggers/profilers use this metadata to determine which function a
given instruction is in; without it they get can confused by local labels
(if you haven't stripped those). On the other hand, some tools are still
confused even with this metadata. e.g. this fixes `gdb`, but not `perf`.
Currently only implemented for ELF.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
