lavfi has been considered to be stable for a while now, so it is enabled
in most configurations. Supporting avplay without lavfi requires a lot
of nontrivial ifdef mess for no good reason.
AVX2 support was introduced in Yasm 1.2.0 and NASM 2.10, and the
oldest versions currently supported are Yasm 0.8.0 and NASM 2.03
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Before this patch trying to enable only https by issuing
--disable-protocols --enable-protocol=https --enable-gnutls
does not enable https, and
--disable-all --enable-protocols
does not enable libavformat and the protocols component.
Now the default-enabled options are set after the explicitly
disabled/enabled options are evaluated.
If an explicitly enabled option cannot be enabled configure
will fail printing an error message.
Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.
Requires Kvazaar version 0.8.1.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This fixes builds with --disable-vda, which previously failed with
undefined references to CVImageBuffer* and CVPixelBuffer* functions.
Signed-off-by: Martin Storsjö <martin@martin.st>
While pr is a valid POSIX.1 command, its usage in configure
is a little borderline and is possible to replace it with
printf.
Bug-Id: 913
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
MSYS, as per cygwin, by default uses a custom posix abstraction
in the form of a "msys2.dll". Programs build that way are harder to
distribute and use.
MSYS2 provides alternate launcher scripts that provide a MINGW
environment nearly out of box.
In order to load libraries in Android they need to be unversioned.
The android target section was derived from the BSD ones, and they
that simply drop the SONAME
Android M requires to have a SONAME entry but unversioned.
Some systems may be lacking getservbyport; the previous ifdef wasn't
quite enough since it still assumed that struct servent was defined,
as pointed out by Clément Gregoire.
Simply remove the possibility to return non-numeric services in
getnameinfo; no caller of getnameinfo within libavformat
currently try to use getnameinfo for retrieving the port number without
NI_NUMERICSERV, and falling back on getservbyport may be non-threadsafe.
Signed-off-by: Martin Storsjö <martin@martin.st>
This silences warnings like this one:
libavformat/file.c(62) : warning C4996: 'read': The POSIX name for this
item is deprecated. Instead, use the ISO C++ conformant name: _read.
See online help for details.
Signed-off-by: Martin Storsjö <martin@martin.st>
The versioning facility in the Solaris linker differs from Linux in 3 ways:
1. It does not support globs in linker scripts for
symbol versioning -- this is a GNU extension.
2. The linker argument is '-M', instead of '--version-script'.
3. It is picky about line endings.
Each symbol or directive must be on a line of it's own.
Let's use make_sunver.pl from GCC to generate a version script that works
correctly with the Solaris linker. It's function is to correctly expand the
globs in the original generated version script.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This way is sufficient to use the component specific configure variable
and not guard against the global library configure variable in code
that is outside it (e.g. checkasm).
Some gcc-based toolchain would fail to link if the abi set by the
cpuflags does not match the default.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
And update the preference for the newer codecs now that the libraries
seem stable and widespread enough.
Bug-Id: 695
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Don't try to detect the float ABI by checking at the toolchain
name or by trying to assemble and link files with eabi_attributes.
This fixes the float ABI detection when building using clang
with -fembed-bitcode, where the current eabi_attributes check
accidentally passes.
This issue was pointed out by James Howe <james.howe@hp.com>.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
On Xcode's clang on OS X, $cc --version will output a 'Configured with:'
line to stderr, which clobbers the configure script output. As this line
serves no further purpose, it should be silenced.
The same applies to apple-gcc 4.2.1, which complains that it can not
understand the kernel version it is running on.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This avoids having to manually set _WIN32_WINNT in --extra-cflags
when targeting these API families, which only was necessary to
work around configure setting _WIN32_WINNT to an older version
by default.
Signed-off-by: Martin Storsjö <martin@martin.st>
If _WIN32_WINNT is unset, we force it to a new enough value to
make sure the necessary definitions are visible.
When targeting Windows Phone or Windows RT, _WIN32_WINNT should
be at least 0x0602 - otherwise the windows headers themselves
can cause errors (which technically are bugs in the headers).
Raising this value here shouldn't hurt; the alternative would
be to not touch it at all if WINAPI_FAMILY is set to phone/app,
or to force setting it to 0x0602 in configure if unset (for phone/app).
Signed-off-by: Martin Storsjö <martin@martin.st>
This macro identifies whether VFPv3 is available; MSVC defaults
to hardfloat (except for older MSVC versions for CE, targeting
ARMv4).
Signed-off-by: Martin Storsjö <martin@martin.st>
This is only necessary on MSVC 2010/2012 (and possibly on some
ICL versions). This both avoids an extra hack on newer MSVC
versions, and better documents what the extra compiler option
is used for.
Signed-off-by: Martin Storsjö <martin@martin.st>
The struct definitions in dxva.h, which are necessary in order to
actually use d3d11va, are hidden when WINAPI_FAMILY targets Windows Phone
or WindowsRT.
Building with WINAPI_FAMILY=WINAPI_FAMILY_DESKTOP_APP is disallowed
when targeting ARM. ("Compiling Desktop applications for the ARM
platform is not supported.") So we set _CRT_BUILD_DESKTOP_APP to 0
to tell the runtime not to detect some issues with this mismatching.
The same tweaks to detect if the API is available is done in dxva2_internal.h
when compiling each DXVA2/D3D11VA decoders.
Signed-off-by: Martin Storsjö <martin@martin.st>
The -nologo- option is the inverse of -nologo, reenabling printing the
"logo" version header. This is useful if the compiler actually is a
wrapper that forces -nologo.
Signed-off-by: Martin Storsjö <martin@martin.st>
Export symbols by name rather then ordinal.
Remove PROTMODE directive as it does not make sense for 32 bit library.
Also silences a warning from some linkers.
Signed-off-by: Dave Yeo <dave.r.yeo@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Any other x265 symbol may not exported, e.g. if the build is a
multilib (10-bit and 8-bit in one) build.
This is the only symbol we directly call, and is available in the
build number we check for.
Fixes the configure check on multilib x265 builds.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Using the internal DXTC routines brings support for non multiple of 4
textures. A new test is added to cover this feature. Hashes differ
since the decoding algorithm is different, though no visual changes
have been spotted.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This module implements generic texture decompression from different
families (DXTC, RGTC, BCn) and texture compression DXTC 1, 3, and 5.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Bump the minimum libvpx version to 1.3.0 and rework the configure logic
to fail only if no decoders and encoders are found.
Based on the original patch from Vittorio.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The C runtime C99 compatibility had been improved a lot and it now
rejects some of the compatibility defines provided for the older
versions.
Many thanks to Ray for the time spent testing.
Bug-Id: 864
CC: libav-stable@libav.org
These are only necessary once/if avconv gets support for this hwaccel.
While that obviously is desireable, we don't have it yet, and they
currently only are a distraction.
Signed-off-by: Martin Storsjö <martin@martin.st>
The only need to be listed if they are to be used in ifdefs from
within the code - config items used as dependencies only within
configure don't need to be exported.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes dxva2 detection (i.e. correctly realizes that it isn't
available) for WinRT, where dxva2api.h does exist, but these definitions
are omitted (when targeting the API subsets).
Ideally we should rather check for e.g. DXVA2_ConfigPictureDecode,
but configure might fail to find that definition due to _WIN32_WINNT
not being set to the right value during configure. (libavcodec/dxva2.h
manually overrides the _WIN32_WINNT define.)
This allows removing hardcoded --disable-dxva2 from such build
configurations.
Signed-off-by: Martin Storsjö <martin@martin.st>
mpz_import and mpz_export were added in GMP 4.1, in 2002.
This simplifies the DH code by clarifying that it only uses pure
bignum functions, no other parts of nettle/hogweed.
Signed-off-by: Martin Storsjö <martin@martin.st>
Move the OpenSSL and GnuTLS implementations to their own files. Other
than the connection code (including options) and some boilerplate, no
code is actually shared.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use the Multi-library interface to load at runtime x265 libraries
supporting alternative bit depths (e.g. 8bit and 16bit).
The linked library will try to load the library supporting the
pixel format if it is not supported by itself.
Fallback requesting the native library (passing 0 to x265_api_get) if
a library supporting the requested bit depth is not available.
Signed-off-by: Gopu Govindaswamy <gopu@multicorewareinc.com>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Only MSVC 2010 in x64 mode, in the static msvcrt, had a
stray log2 function (which wasn't available in the headers).
MSVC 2013 has got a proper log2 function though.
Signed-off-by: Martin Storsjö <martin@martin.st>
$cc is the compiler requested as main target compiler, while $_cc
is the actual tool tested in the probe function right now (which
can also be e.g. the host compiler).
Signed-off-by: Martin Storsjö <martin@martin.st>
This is enabled by default, but can be disbled via the -noautorotate
option.
Based on a patch by Clément Bœsch.
Signed-off-by: Martin Storsjö <martin@martin.st>
Useful to understand where and in what execution state a certain message
is generated. It is enabled only when optimizations are disabled, since
function names are not printed otherwise.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
When all the codepaths using manually set .arch/.fpu code is
behind runtime detection, the elf attributes should be suppressed.
This allows tools to know that the final built binary doesn't
strictly require these extensions.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since not all systems need the libraw1394 dependency, let pkg-config
provide the list of libraries actually needed.
The libdc1394-2.pc file has been included since version 2 (2008-01-05),
so it should be safe to use.
This fixes builds with vc1_parser enabled without vc1_decoder. All
the vc1_decoder object files were included in the vc1_parser line
in libavcodec/Makefile before, but architecture specific object files
for vc1_decoder were not.
Signed-off-by: Martin Storsjö <martin@martin.st>
Compared to existing, common opensource H264 encoders, this can be
useful since it has got a different license (BSD instead of GPL).
Performance- and qualitywise it is comparable to x264 in ultrafast
mode.
Hooking it up as an encoder in libavcodec also simplifies comparing
it against other common encoders.
This requires OpenH264 1.3 or newer. Since the OpenH264 API and ABI
changes frequently, only releases are supported.
To take advantage of the OpenH264 patent offer, the OpenH264 library
must not be redistributed, but downloaded at runtime at the end-user's
system.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows using libraries that are detected via pkg-config with
msvc. (The libraries themselves may have to be built with MSVC
though.)
Signed-off-by: Martin Storsjö <martin@martin.st>
The MoveFileExA is available in the headers regardless which API
subset is targeted, but it is missing in the Windows Phone link
libraries. When targeting Windows Store apps, the function is
available both in the headers and in the link libraries, and thus
there is no indication for the build system that this function
should be avoided - such an indication is only given by the
Windows App Certification Kit, which forbids using the MoveFileExA
function.
Therefore check the WINAPI_FAMILY defines instead, to figure out
which API subset is targeted.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows getting the normal unix semantics, where a rename
allows replacing an existing file.
Based on a suggestion by Reimar Döffinger.
Signed-off-by: Martin Storsjö <martin@martin.st>
simd_align_16 is a configure item that can be enabled or disabled,
it's not a variable containing a list of other configure items
as need_memalign previously. This was broken in eba2233b5.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This is mostly to serve as a reference example on how to segment
the output from the mp4 muxer, capable of writing the segment
list in four different ways:
- SegmentTemplate with SegmentTimeline
- SegmentTemplate with implicit segments
- SegmentList with individual files
- SegmentList with one single file per track, and byte ranges
The muxer is able to serve live content (with optional windowing)
or create a static segmented MPD.
In advanced cases, users will probably want to do the segmenting
in their own application code.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows writing most code as if they always are is available.
These are ok to use from other libraries even though it's not a
public header, since they only provide an inline declaration, and
doesn't add an actual dependency on lavu internals. (This can be
considered more a build system compatibility fallback than a
libavutil feature.)
Signed-off-by: Martin Storsjö <martin@martin.st>
This silences warnings about passing arguments from incompatible pointer type
when targeting Windows Vista or newer.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This option facilitates testing shared libarary builds: for instance
fate builders do no longer need to set LD_LIBRARY_PATH as the binaries will
get the right search paths hardcoded into their executable file.
This option is only meant to be used for testing purposes: The installed
libraries must not move around in the file system, and doing so will
cause a lot of subtle problems. For more information why using RPATH is
dangerous, please refer to
https://blog.flameeyes.eu/2010/06/the-why-and-how-of-rpath
On mingw64 with c++11 support, the link libraries do contain a
nanosleep function, while it isn't exposed via the headers. Using
check_func_headers instead of a plain check_func fixes this
misdetection.
Signed-off-by: Martin Storsjö <martin@martin.st>
The -MD option (for enabling a dynamically linked crt) gets interpreted
as a cpp option for generating dependency information (into a file named
'-.d', when preprocessing to a pipe). We shouldn't be passing
any and all C compiler flags to armasm (which is a plain assembler,
only with cpp bolted on via gas-preprocessor), but these are the
main conflicting ones.
Signed-off-by: Martin Storsjö <martin@martin.st>
This tries to find the most expressive part of the output of
armcc --vsn to include, giving a compiler identification of
"ARM Compiler 5.04 update 2 (build 82)" instead of just
"ARM Compiler 5.04" for armcc 5.0.
4.x versions of armcc output the following, for "armcc --vsn":
ARM C/C++ Compiler, RVCT4.0 [Build 925]
For evaluation purposes only
Software supplied by: ARM Limited
ARM C/C++ Compiler, 4.1 [Build 894]
For evaluation purposes only
Software supplied by: ARM Limited
5.0 versions output this:
Product: ARM Compiler 5.04
Component: ARM Compiler 5.04 update 2 (build 82)
Tool: armcc [5040081]
For evaluation purposes only
Software supplied by: ARM Limited
Signed-off-by: Martin Storsjö <martin@martin.st>
llvm's integrated assembler supports the AArch64 asm on darwin since
August 2014. So check $as first before using gas-preprocessor.pl via
$gas. Makes the checks specific for that the architecture specific asm
needs. PPC Altivec and AArch64 needs on ':vararg' for macro arguments.
Arm needs in addition the '.altmacro' directive.
Initialise VC1DSPContext for parser as well as for decoder.
Note, the VC-1 code doesn't actually use the function pointer yet.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Check for an instruction that causes the (very old) Apple GCC 4.2
to error out ("unrecognizable insn").
Signed-off-by: Martin Storsjö <martin@martin.st>
It has not been properly maintained for years and there is little hope
of that changing in the future.
It appears simpler to write a new replacement from scratch than
unbreaking it.
Clang's integrated assembler (after 3.4) does not yet support the
'.altmacro' directive which is only used in arm asm. Support is planned:
http://llvm.org/bugs/show_bug.cgi?id=18918
Move the GNU as check before the arch specific asm checks since the .dn
check requires gas compatible assembler.
Disable the VC-1 motion compensation NEON asm which is the only part
using that directive. The integrated assembler in the upcoming clang 3.5
does not support .dn/.qn without plans to change that. Too much effort
to implement it while it is rarely used.
http://llvm.org/bugs/show_bug.cgi?id=18199.
Clang Undefined Behaviour Sanitizer seems to make non-constant constant
expressions, making the compilation fail when they are used within
inline assembly if no optimization is requested.
Add -O1 to the cflags to hide the misbehaviour.
Bug-Id: 683
Initial implementation by Andrew D'Addesio <modchipv12@gmail.com> during
GSoC 2012.
Completion by Anton Khirnov <anton@khirnov.net>, sponsored by the
Mozilla Corporation.
Further contributions by:
Christophe Gisquet <christophe.gisquet@gmail.com>
Janne Grunau <janne-libav@jannau.net>
Luca Barbato <lu_zero@gentoo.org>
It leverages the new hwaccel 1.2 features:
- get_buffer2 is never called
- the internal context is automatically initialized/deinitialized
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Further performance improvements and security fixes by
Vittorio Giovara, Luca Barbato and Diego Biurrun.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Additional fixes and enhancements by Vittorio Giovara, Gonzalo Garramuno,
Nicolas George, Paul B Mahol and Michael Niedermayer.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Build 13 has a crucial fix which makes x265_encode_headers work
as its always been documented.
Previous to this, the check was incorrect.
Also allows for use of the repeat headers flag.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The DCBZL instruction is not available for the e500v1 and e500v2
architectures, but may still be recognized by the toolchain, so we
need to explicitly disable it for these architectures.
References: PowerPC™ e500 Core Family Reference Manual (Freescale)
Found-by: Ståle Kristoffersen <staalebk@ifi.uio.no>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The values of {FLT,DBL}_{MAX,MIN} macros on some systems (older musl
libc, some BSD flavours) are not exactly representable, i.e.
(double)DBL_MAX == DBL_MAX is false
This violates (at least some interpretations of) the C99 standard and
breaks code (e.g. in vf_fps) like
double f = DBL_MAX;
[...]
if (f == DBL_MAX) { // f has not been changed yet
[....]
}
Not guaranteed to be in nanosecond resolution. On iOS 7 the duration
of one tick is 125/3 ns which is still more than an order of magnitude
better then microseconds.
Replace decicycles with the neutral UNITS. Decicycles is strange but
tenths of a nanosecond and unspecific "deci"-ticks for mach_absolute_time
is just silly.
The SVQ3 decoder reuses large parts of the H.264 decoder so it
makes no sense to enable the former but not the latter.
Also drop unnecessary h263.o object from SVQ3 decoder object list.
The s390 architecture requires shared libraries to be built in PIC mode.
Otherwise applications will get wrong relocations at run-time, leading
to confusing segmentation faults.
CC: libav-stable@libav.org
A threading type might be detected originally, but later disabled
if one of its dependencies is unavailable.
This makes sure that the threading support item in the configure
output is right for setups where w32threads are available but
native atomics aren't.
Signed-off-by: Martin Storsjö <martin@martin.st>
These codecs compile all of the MJPEG code anyway, so there is little
point in not enabling the MJPEG decoder directly. This also simplifies
the dependency declarations for the MJPEG codec family.
This codec compiles all of the SP5X code anyway, so there is little
point in not enabling the decoder directly. This also simplifies the
dependency declaration for the AMV decoder.
The vector dequantization has a test in a loop preventing effective SIMD
implementation. By moving it out of the loop, this loop can be DSPized.
Therefore, modify the current DSP implementation. In particular, the
DSP implementation no longer has to handle null loop sizes.
The decode_hf implementations have following timings:
For x86 Arrandale:
C SSE SSE2 SSE4
win32: 260 162 119 104
win64: 242 N/A 89 72
The arm NEON optimizations follow in a later patch as external asm. The
now unused check for the y modifier in arm inline asm is removed from
configure.
Framerate is now a sane rational instead of an integer, and
inputDepth is changed to what it actually is.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Moving cpunop from the HAVE_LIST to the ARCH_EXT_LIST_X86 has the side
effect of enabling it. The semantics of the check have to be changed
from enable if successful to disable if unsuccessful. This was missing
in 2b0bb69997 causing build errors with
nasm.
Fixes dependency file generation with gas-preprocessor.pl and clang.
Flags copied from GCC and tested with Apple's clang from Xcode 5 and
5.1 and clang 3.2, 3.3, 3.4 on Linux.
NEON and VFP are currently mandatory for all ARMv8 profiles. Both are
handled as extensions as far as cpuflags are concerned. This is
consistent with handling x86_64 which always has SSE2, but still
handles it as an extension.
Stack is always 16 byte aligned and clz, 64bit operations and unaligned
memory access are fast in aarch64 mode on ARMv8.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Previously, if neither of the checks for the closesocket function
succeeded, we still kept winsock2.h and networking in general
enabled.
When targeting the WinRT API subset, the winsock2.h header is
available (making the check for it succeed, giving the impression
that winsock is available), but tests that actually try to use
such a function will fail. In this case, disable the winsock2.h
feature and networking in general, as if the winsock2.h header
test would have failed in the first place.
Signed-off-by: Martin Storsjö <martin@martin.st>
New versions of FreeType have moved the location of their API
header(s) and hide the location behind a macro.
Since the location changes between versions and no other way
to know the location exists, this workaround becomes necessary.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Some pthreads symbols might be present in libc (as shown on various *BSD)
but not all of them, leading to false positives.
Check for the most common compiler flags before the plain symbol check
to avoid known pitfalls.
Directly loads AviSynth through LoadLibrary instead of relying on
Video for Windows, and supports using AvxSynth (via dlopen) to
open scripts on Linux and OS X.
Error messages from AviSynth/AvxSynth are now reported through
av_log and exit, rather than the traditional behavior of generating
an error video that the user would need to watch to diagnose.
The main rewrite was authored by d s <avxsynth.testing@gmail.com>
from the AvxSynth team, with additional contributions by
Oka Motofumi <chikuzen.mo@gmail.com>
Stephen Hutchinson <qyot27@gmail.com>
Diego Biurrun <diego@biurrun.de>
Anton Khirnov <anton@khirnov.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Certain instrumentation addons leads to a false positive in configure
and link failures at the end of the build phase.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This will check if -wN '..@*' is available and fall back on -x if not;
when none are available, do not run strip at all to prevent removing
functions that might be actually needed.
Msys is unable to convert unix style absolute paths to windows style
paths when combined with certain multichar MSVC options such as
-Fo<file>. We used to work around this issue by passing them as two
separate parameters separated by a space to c99wrap, which then mapped
them back to the actual parameter format that MSVC uses.
The only paths that actually are an issue are absolute unix style
paths, and the only place such absolute paths are used with the output
arguments (-Fo, -Fe, -Fi, -out:) are for the temp files within configure.
By setting TMPDIR to . for msvc/icl builds, we never need to use
absolute unix style paths for the file output, and we can use the
actual proper form of the file output parameters. This avoids requiring
the c99wrap wrapper for remapping the parameters for cases where the
c99 converter isn't invoked at all (MSVC2013 and ICL).
Signed-off-by: Martin Storsjö <martin@martin.st>
ICL doesn't return an error on unknown parameters, and will
always pass the symver_gnu_asm test, and since Windows
never has symbol versioning, just always disable it.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
On some platforms (such as msys), symlinks are (poorly) emulated
by simply creating a copy of the file.
This means that when building out of tree, the build tree gets
a copy of the original makefile, which can lead to unintuitive
build errors when the original makefile gets updated later.
Instead simply create a stub makefile which includes the real
one.
Signed-off-by: Martin Storsjö <martin@martin.st>
Originally written by Ronald S. Bultje <rsbultje@gmail.com> and
Clément Bœsch <u@pkh.me>
Further contributions by:
Anton Khirnov <anton@khirnov.net>
Diego Biurrun <diego@biurrun.de>
Luca Barbato <lu_zero@gentoo.org>
Martin Storsjö <martin@martin.st>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
MSVC does support enough of C99 to work without the converter since
the 2013 version. Try to detect which version of the compiler in
the path needs to run the C99 converter or not. When the converter
is omitted, compilation time is reduced quite drastically.
Prior to this, users could still use --cc="c99conv -noconv cl"
when running MSVC 2013 to achieve the same.
This checks the version number instead of doing a normal compile
test, since this check needs to be done earlier in configure, before
the normal compile test helpers are usable.
Signed-off-by: Martin Storsjö <martin@martin.st>
As another example of bizarre compiler behavior clang groks the
-Wmaybe-uninitialized option, but not -Wno-maybe-uninitialized
and spews a warning for every file that gets compiled.
For some weird reason gcc does not check if the -Wno disabling variants
of warning flags match existing warning flags. Instead it swallows them
silently. That is, unless other warning or error messages are generated,
because then - for some even more bizarre reason - a complaint about the
unknown disable warning flag is issued along with the error or warning
message.
Thus to check for the availability of a warning disabling option, one
needs to check for the enabling variant instead and then add the
disabling variant to CFLAGS.
Initially written by Guillaume Martres <smarter@ubuntu.com> as a GSoC
project. Further contributions by the OpenHEVC project and other
developers, namely:
Mickaël Raulet <mraulet@insa-rennes.fr>
Seppo Tomperi <seppo.tomperi@vtt.fi>
Gildas Cocherel <gildas.cocherel@laposte.net>
Khaled Jerbi <khaled_jerbi@yahoo.fr>
Wassim Hamidouche <wassim.hamidouche@insa-rennes.fr>
Vittorio Giovara <vittorio.giovara@gmail.com>
Jan Ekström <jeebjp@gmail.com>
Anton Khirnov <anton@khirnov.net>
Martin Storsjö <martin@martin.st>
Luca Barbato <lu_zero@gentoo.org>
Yusuke Nakamura <muken.the.vfrmaniac@gmail.com>
Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Diego Biurrun <diego@biurrun.de>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
F4V is Adobe's mp4/iso media variant, with the most significant
addition/change being supporting other flash codecs than just
aac/h264.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is in preparation for removing a .rodata kludge
which was only required for older YASM versions.
The movbe instruction was introduced in 0.8.0, which already
had AVX, which was introduced in 0.7.0, and NASM introduced
movbe in 2.0.3, which is the same version which introduced
AVX support.
Also, make the failure message more accurate.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The implementation of 25cb0c1a involves lots of spurious labels.
The effect of keeping those labels around is making debugging harder.
Those labels are meaningless, and complicate the disassembly. Also,
gdb can't tell the difference between them and function entry points.
This new strip command is irrelevant to any usage of Libav that would
have used the old fully stripped version, because the old one was for
non-debug use.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Qansi-alias worked on 12.x, then caused miscompilation on 13.x, but now
works again passing all FATE tests for icl version 14.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Prior to this on msvc/icl there was no handling of deprecated functions
and the deprecated warning was disabled.
After enabling there are a number of warnings relating to the CRT and
the use of the non-secure versions of several functions. Defining
_CRT_SECURE_NO_WARNINGS silences these warnings.
Signed-off-by: Martin Storsjö <martin@martin.st>
The i686 feature really is a CPU feature and should be handled as such.
The cpunop dependency on i686 should be expressed with a standard _deps
declaration instead of a manual test.
The hls muxer itself doesn't have any direct (object file level)
dependencies on mpegtsenc.o, and including that object file
directly doesn't ensure that it is registered so that the muxer
actually is accessible.
Signed-off-by: Martin Storsjö <martin@martin.st>
There is no record of this ever being used at all, anywhere,
since the feature was added in 2effd27446.
This gets rid of extra linker tricks just to support a feature
that isn't used, simplifying portability to other platforms.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use this for enabling the ppc timer.h implementation only on
assemblers that support labels in the inline assembly.
Signed-off-by: Martin Storsjö <martin@martin.st>
Because O1 or O2 are required to build libav with msvc/icl, this must be
explicitly set instead of just omitting Oy.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
It is implied by O1 or O2, both of which are required to build libav
with msvc/icl. Silences warnings when targeting x64 with icl.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This avoids warnings about this option not having any effect on
this platform.
We still want to enable the pic configure item for these platforms
(if detected via the compiler builtin define __PIC__) to get proper
inline assembly workarounds.
Signed-off-by: Martin Storsjö <martin@martin.st>
This reverts e08c946c6 and 05165c2f7a. The actual intention of
e08c946c6 was to fix shared library builds for arm/win32, which
can also be accomplished in other ways.
Disabling pic on those platforms broke inline assembly on cygwin/64
(since some inline assembly requires knowing whether we are building
as PIC or not), and might also break inline assembly on other
compilers on windows.
As a side-effect, this unfortunately brings back all the warnings
about PIC not having any effect on that platform.
Signed-off-by: Martin Storsjö <martin@martin.st>
The object file format doesn't support PIC loads in ARM assembly,
there are no relocation types in PE/COFF that correspond to
BFD_RELOC_32_PCREL (R_ARM_REL32 in ELF).
Signed-off-by: Martin Storsjö <martin@martin.st>
Allows for easier handling of flags that may be specific to icl or msvc.
Furthermore, simplify the handling of warnings and remarks thanks to
icl's support of -Wall on Windows.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The modern MSVC for ARM always builds for thumb, and it can't be
disabled.
Also just use the default arch instead of trying to map the -march
parameter to MSVC's -arch parameter (which only takes the values
ARMv7VE and VFPv4).
Signed-off-by: Martin Storsjö <martin@martin.st>
Initial support for the ICL compiler on windows. Requires a new
c99wrap with ICL support (1.0.2+).
Currently not much different speed wise compared to msvc. In the
future with a few changes it can be made to support the inline asm.
This would be the primary reason for using it.
Passed all fate tests, versions tested:
13.1.1.171 (2013 Update 3) x86 and x64
12.1.5.344 (2011 Update 11) x86 and x64
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Change the check_exec_crash test to use a function pointer instead of
simply calling the function. The EBP availability test will crash when
compiled with ICL likely due to compiler optimization shenanigans.
Originally the check_exec_crash code was moved out of main to fix a
problem with gcc's treatment of non-leaf main on x86_32. Libav already
moved the code out of main but the addition of the function pointer will
prevent any inlining which fixes the remaining problem.
A function pointer is used since it is compiler agnostic (as opposed to
say __attribute__ ((noinline)) which would only work with gcc compatible
compilers).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
MSVC 2010 (or more precisely, Windows SDK 7.0 which comes with MSVC
2010) sets _WIN32_WINNT to the constant for Windows 7 if nothing is
set. This could lead to the libav configure script detecting and
using functions only present in Windows 7 or newer, which in most
cases isn't desired. If the caller explicitly wants this, the caller
can add the _WIN32_WINNT define via --extra-cflags, setting the desired
version.
Signed-off-by: Martin Storsjö <martin@martin.st>
With the parameter --toolchain valgrind-massif, the configure
script sets reasonable defaults that can be overridden as explained
in the documentation.
This makes it consistent with the msvc builds which automatically set
the DEP and ASLR flags by default. There really is no good reason why
they shouldn't be set.
The fact that binutils does not set them on by default boggles the mind.
Signed-off-by: Martin Storsjö <martin@martin.st>
If this is explicitly disabled for win32/mingw, it should also
be disabled for cygwin, for consistency and for the same reasons
as for win32/mingw.
Signed-off-by: Martin Storsjö <martin@martin.st>
These platforms do not have any notion of PIC. On some compilers,
enabling pic produces a number of warnings.
This avoids trying to produce PIC loads in the ARM assembly - there
are no relocation types in PE/COFF that correspond to
BFD_RELOC_32_PCREL (R_ARM_REL32 in ELF).
As a side-effect, this avoids enabling PIC on mingw64, getting rid
of the warnings about PIC not having any effect on that platform.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows it to be overridden, either by the user on the command
line, or by other sections of the configure script.
Signed-off-by: Martin Storsjö <martin@martin.st>
When targeting the "windows store application" (metro) API subset
(or the windows phone API subset), the getenv function isn't
available. If it is unavailable, just define getenv to NULL.
The check uses check_func_headers, since the function actually
might exist in the libraries, but is hidden in the headers.
The fallback is in config.h since msvc can't do -D defines with
parameters on the command line, and it's used both within the
libraries and the frontend applications (so a libavutil internal
header wouldn't be enough).
Signed-off-by: Martin Storsjö <martin@martin.st>
With the parameter --valgrind-memcheck, the configure script sets
reasonable defaults that can be overridden as explained in the
documentation.
The idea of using set_defaults is from Luca Barbato.
If building libav with -MD in the cflags (for making the MSVC compiler
generate code for using a dynamically linked libc), the system headers
that declare strtod, snprintf and vsnprintf declare the functions as
imported from a DLL. To hook up wrappers of our own for these functions,
the function names are defined to avpriv_*, so that the calling code
within libav calls the wrappers instead. Since these functions
are declared to be imported from DLLs, the calling code expects to
load them from DLL import function pointers (creating references to
_imp__avpriv_strtod instead of directly to avpriv_strtod). If the
libav libraries are not built as DLLs, no such function pointers (as
the calling code expects) are created.
The linker can fix this up automatically in some cases (producing
warnings LNK4217 and LNK4049), if the object files are already
included. By telling the linker to try to include those symbols
(without the _imp prefix as the calling code ends up using),
we get the object files included, so that the linker can do the
automatic fixup. This is done via config.h, so that all (or at least
most) of the object files in our libraries force including the compat
files, to make sure they are included regardless of what files from our
static libraries actually are included.
Signed-off-by: Martin Storsjö <martin@martin.st>
