When the user opted to write the Cues at the beginning, the Cues were
simply written without checking in advance whether enough space has been
reserved for them. If it wasn't enough, the data following the space
reserved for the Cues was simply overwritten, corrupting the file.
This commit changes this by checking whether enough space has been
reserved for the Cues before outputting anything. If it isn't enough,
no Cues will be output at all and the file will be finalized normally,
yet writing the trailer will nevertheless return an error to notify
the user that his wish of having Cues at the front of the file hasn't
been fulfilled.
This change opens new usecases for this option: It is now safe to use
this option to e.g. record live streams or to use it when muxing the
output of an expensive encoding, because when the reserved space turns
out to be insufficient, one ends up with a file that just lacks Cues
but is otherwise fine.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Matroska muxer currently assumed WavPack version 4.03 in case it was
not explicitly signalled via extradata; but following a recommendation
from David Bryant, the WavPack creator, this is changed to 4.10.
Reviewed-by: David Bryant <david@wavpack.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It might be used by the Matroska muxer. This is also the reason why the
FATE-tests for muxing WavPack into Matroska needed to be updated: They
now write the correct version 4.07 and not 4.03 as before.
Reviewed-by: David Bryant <david@wavpack.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
mkvmerge versions 6.2 to 40.0 had a bug that made it not propagate the
WavPack extradata (containing the WavPack version) during remuxing from
a Matroska file; currently our demuxer would treat every WavPack block
encountered as invalid data (unless the WavPack stream is to be
discarded (i.e. the streams discard is >= AVDISCARD_ALL)) and try to
resync to the next level 1 element.
Luckily, the WavPack version is currently not really important; so we
fix this problem by assuming a version. David Bryant, the creator of
WavPack, recommended using version 0x410 (the most recent version) for
this. And this is what this commit does.
A FATE-test for this has been added.
Reviewed-by: David Bryant <david@wavpack.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If the buffer doesn't contain enough bytes when reading a stream,
fail rather than continuing on with unitialized data. Caught by
Chromium fuzzers (crbug.com/1054229).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The clli atom isn't in ISO/IEC 14496-12:2015 so the flag is marked as
experimental and the clli atom is not written by default.
The clli atom is already parsed by FFmpeg in mov.c.
Signed-off-by: Michael Bradshaw <mjbshaw@google.com>
1. When set_parameters was removed from AVOutputFormat in 2fb75019, it
was forgotten to remove the comment pertaining to it. Said comment now
appeared to apply to interleave_packet(); it is of course nonsense and
has been replaced by an accurate description.
2. The description of av_write_uncoded_frame() suggested
av_interleaved_write_frame() as a replacement if the input is not
already correctly interleaved; it also referred to said function for
details. Given that said function can't write AVFrames and that the
specifics of writing uncoded frames are explained in the description
of av_interleaved_write_uncoded_frame(), both references have been fixed.
3. Removed an outdated comment about avformat_seek_file().
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
struct v4l2_selection contains reserved bytes which should be set to
zero before the ioctl call.
Fixes valgrind error:
Syscall param ioctl(VKI_V4L2_S_SELECTION) points to uninitialised byte(s)
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
If ff_interleave_add_packet failed, the content of the newly created
packet new_pkt would leak.
Also, it is unnecessary to zero-initialize a packet that will be put
into av_new_packet lateron as the latter already initializes the packet.
Therefore this has been removed, too.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It is unnecessary to call prepare_input_packet if there is no packet as
it doesn't do anything, except when the currently inactive code guarded
by !FF_API_COMPUTE_PKT_FIELDS2 || !FF_API_LAVF_AVCTX becomes active:
Then attempting to access pkt->stream_index will crash.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If one calls av_opt_set() with an incorrect string to set the value of
an option of type AV_OPT_TYPE_VIDEO_RATE, the given string is used in a
log message via %s. This also happens when the string is actually a
nullpointer in which case using it for %s is forbidden.
This commit changes this by erroring out early in case of a nullpointer.
This also fixes a warning from GCC 9.2:
"‘%s’ directive argument is null [-Wformat-overflow=]"
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Currently the driver's frame period is incorrectly set to the frame
rate. This is fixed in the commit.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Fixes: out of array read
Fixes: 21286/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HCA_fuzzer-5683183715876864
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Don't use typedef struct MXFTrack {...} MXFTimecodeComponent, in
particular given the fact that MXFTrack is a type of its own.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
end_ebml_master_crc32_preliminary() has a MatroskaMuxContext as
parameter that isn't used at all. So remove it.
Furthermore it doesn't close its dynamic buffer; it just uses the
underlying buffer and therefore it only needs a pointer to the
dynamic buffer, not a pointer to a pointer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, writing level 1 elements proceeded as follows: First, the
element id was written to the ordinary output AVIOContext and a dynamic
buffer was opened for the content of the level 1 element in
start_ebml_master_crc32(). Then this buffer was actually used and after it
was closed (in end_ebml_master_crc32()), the size field corresponding to
the buffer's size was written, after which the actual data was written.
This commit changes this: Nothing is written to the main AVIOContext any
more in start_ebml_master_crc32(). end_ebml_master_crc32() now writes
both the id, the length field as well as the data. This implies that
one can start a level 1 element in memory without outputting anything.
This is done to enable to test whether enough space has been reserved
for the Cues (if space has been reserved for them) before writing them.
A large duration between outputting the header and outputting the rest
could also break certain streaming usecases like the one from #8578
(which this commit fixes).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When the Matroska muxer writes the Cues (the index), it groups index
entries with the same timestamp into the same CuePoint to save space.
But given Matroska's variable-length length fields, it either needs
to have an upper bound of the final size of the CuePoint before writing it
or the CuePoint has to be assembled in a different buffer, so that after
having assembled the CuePoint (when the real size is known), the CuePoint's
header can be written and its data copied after it.
The first of these approaches is the currently used one. This entails
finding out the number of entries in a CuePoint before starting the
CuePoint and therefore means that the list is read at least twice.
Furthermore, a worst-case upper-bound for the length of a single entry
was used, so that sometimes bytes are wasted on length fields.
This commit switches to the second approach. This is no longer more
expensive than the current approach if one only resets the dynamic
buffer used to write the CuePoint's content instead of opening a new
buffer for every CuePoint: Writing the trailer of a file with 540.000
CuePoints improved actually from 219054414 decicycles to 2164379394
decicycles (based upon 50 iterations).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Resetting a dynamic buffer means to keep the AVIOContext and the
internal buffer used by the dynamic buffer. This is done in order to
save (re)allocations when one has a workflow where one opens and closes
dynamic buffers in sequence.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, the Matroska muxer would allocate a structure containing
three members: The segment offset, a pointer to an array containing Cue
(index) entries and a counter for said array. It is unnecessary to
allocate it separately and it is unnecessary to contain the segment
offset in said structure, as it duplicates another field contained in
the MatroskaMuxContext. This commit implements the corresponding
changes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When writing the SeekHead (a form of index) at the end of the muxing
process, mkv_write_seekhead() would first seek to the position where the
SeekHead ought to be written, then write it there and seek back to the
original position afterwards. Which means: To the end of the file.
Afterwards, a seek to the beginning of the file is performed to update
further values. This of course means that the second seek in
mkv_write_seekhead() was unnecessary.
This has been changed: A new parameter was added to mkv_write_seekhead()
containing the destination for the second seek, effectively eliminating
the seek to the end of the file after writing the SeekHead.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
mkv_write_seekhead() would up until now try to seek to the position where
the SeekHead ought to be written, write the SeekHead and seek back. The
first of these seeks was checked as was writing, yet the seek back was
unchecked. Moreover the return value of mkv_write_seekhead() was unchecked
(the ordinary return value was the position where the SeekHead was written).
This commit changes this: Everything is checked. In the unseekable case
(where the first seek may nevertheless work when it happens in the buffer)
a failure at the first seek is not considered an error. In any case,
failure to seek back is an error.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When the Matroska muxer writes an EBML ID, it calculates the length of
said ID before; and it does this as if this were a number that needs to
be encoded as EBML number: The formula used is (av_log2(id + 1) - 1) / 7
+ 1. But the constants used already contain the VINT_MARKER (the leading
bit indicating the length of the EBML number) and therefore the algorithm
used makes no sense. Instead the position of the most significant byte
set gives the desired length.
The algorithm used until now worked because EBML numbers are subject to
restrictions: If the EBML number takes up k bytes, then the bit 1 << (7
* k) is set and av_log2(id) is 7 * k. So the current algorithm produces
the correct result unless the EBML ID is of the form 7 * k - 1 because
of the "id + 1". But contrary to encoding lengths as EBML number (where
the + 1 exists to avoid the encodings reserved for unknown length),
such EBML numbers are simply forbidden as EBML IDs and as such none of
them were ever written.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This commit updates the documentation of av_read_frame() to match its
actual behaviour in several ways:
1. On success, av_read_frame() always returns refcounted packets.
2. It can handle uninitialized packets.
3. On error, it always returns blank packets.
This will allow callers to not initialize or unref unnecessarily.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Since commit e134c203 strdups of several elements of a manifest are kept
in the DASHContext; but said commit completely forgot to free these
strings again (with xmlFree()). Given that these strings are never used
at all, this commit closes this leak by reverting said commit.
This reverts commit e134c20374.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, it was completely unspecified what the content of the
destination packet dst was on error. Depending upon where the error
happened calling av_packet_unref() on dst might be dangerous.
This commit changes this by making sure that dst is blank on error, so
unreferencing it again is safe (and still pointless). This behaviour is
documented.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
av_packet_ref() mostly treated the destination packet dst as uninitialized,
i.e. the destination fields were simply overwritten. But if the source
packet was not reference-counted, dst->buf was treated as if it pointed
to an already allocated buffer (if != NULL) to be reallocated to the
desired size.
The documentation did not explicitly state whether the dst will be treated
as uninitialized, but it stated that if the source packet is not refcounted,
a new buffer in dst will be allocated. This and the fact that the side-data
as well as the codepath taken in case src is refcounted always treated the
packet as uninitialized means that dst should always be treated as
uninitialized for the sake of consistency. And this behaviour has been
explicitly documented.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Validate the value of ST field in the TLM marker of JPEG2000.
Throw an error when ST takes value of 0b11.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The specifications are de-facto frozen now as they've already been used in
production for years, the author has indicated reluctance on IRC to change
it further, and the only potential changes would, from what I understand,
be forward-compatible.
Add overflow test for hevc_add_res when int16_t coeff = -32768.
The result of C is good, while ASM is not.
To verify:
make fate-checkasm-hevc_add_res
ffmpeg/tests/checkasm/checkasm --test=hevc_add_res
./checkasm --test=hevc_add_res
checkasm: using random seed 679391863
MMXEXT:
hevc_add_res_4x4_8_mmxext (hevc_add_res.c:69)
- hevc_add_res.add_residual [FAILED]
SSE2:
hevc_add_res_8x8_8_sse2 (hevc_add_res.c:69)
hevc_add_res_16x16_8_sse2 (hevc_add_res.c:69)
hevc_add_res_32x32_8_sse2 (hevc_add_res.c:69)
- hevc_add_res.add_residual [FAILED]
AVX:
hevc_add_res_8x8_8_avx (hevc_add_res.c:69)
hevc_add_res_16x16_8_avx (hevc_add_res.c:69)
hevc_add_res_32x32_8_avx (hevc_add_res.c:69)
- hevc_add_res.add_residual [FAILED]
AVX2:
hevc_add_res_32x32_8_avx2 (hevc_add_res.c:69)
- hevc_add_res.add_residual [FAILED]
checkasm: 8 of 14 tests have failed
Signed-off-by: Xu Guangxin <guangxin.xu@intel.com>
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
