Enables writing TTML documents or encoded TTML paragraphs as such
documents.
Additionally, a test for the combined TTML encoder and muxer has
been added to validate that the components still work.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
Enables the usage of such values as AV_EF_EXPLODE in encoders, which
can be useful in cases such as subtitle encoders where they have the
responsibility to validate the correctness of an incoming ASS dialog line.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
This flag was added in 492026209b
in conjunction with av_demuxer_open() to allow to pass private
options to demuxers. It worked as follows: av_open_input_stream()
(the predecessor of avformat_open_input()) would not call the
read_header function if this flag is set. Instead the user could set
private options of the demuxer via the format's private class after
avformat_open_input() and then call av_demuxer_open() which called
the format's read_header function.
This approach was abandoned in e37f161e66
and av_demuxer_open() deprecated; instead the AVDictionary based way of
passing private options to the demuxer was choosen. Yet
AVFMT_FLAG_PRIV_OPT has never been deprecated and av_demuxer_open()
never removed. This commit implements the deprecation of the flag and
schedules av_demuxer_open for removal on the next major bump.
Given that av_demuxer_open() has been deprecated in 2012 and that this
flag is useless without it, the flag will be ignored after the next
major version bump.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
AVFrame hasn't been a struct defined in libavcodec for a decade now, when
it was moved to libavutil.
Found-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The FF_API macros are private and must not be used by external callers.
As the fields in question are to be removed without replacement, just
drop them.
The fields are:
AVPacket.convergence_duration
AVCodecContext.time_base
AVCodecContext.timecode_frame_start
AV_PIX_FMT_FLAG_PSEUDOPAL pixel descriptor flag
This commit adds support for in-place FFT transforms. Since our
internal transforms were all in-place anyway, this only changes
the permutation on the input.
Unfortunately, research papers were of no help here. All focused
on dry hardware implementations, where permutes are free, or on
software implementations where binary bloat is of no concern so
storing dozen times the transforms for each permutation and version
is not considered bad practice.
Still, for a pure C implementation, it's only around 28% slower
than the multi-megabyte FFTW3 in unaligned mode.
Unlike a closed permutation like with PFA, split-radix FFT bit-reversals
contain multiple NOPs, multiple simple swaps, and a few chained swaps,
so regular single-loop single-state permute loops were not possible.
Instead, we filter out parts of the input indices which are redundant.
This allows for a single branch, and with some clever AVX512 asm,
could possibly be SIMD'd without refactoring.
The inplace_idx array is guaranteed to never be larger than the
revtab array, and in practice only requires around log2(len) entries.
The power-of-two MDCTs can be done in-place as well. And it's
possible to eliminate a copy in the compound MDCTs too, however
it'll be slower than doing them out of place, and we'd need to dirty
the input array.
This is Visual Information Fidelity (VIF) filter and one of the component
filters of VMAF. It outputs the average VIF score over all frames.
Signed-off-by: Ashish Singh <ashk43712@gmail.com>
It has been added in 6db42a2b6b,
yet since then none of the necessary create/free_device_capabilities
functions has been implemented, making this API completely useless.
Because of this one can already simplify
avdevice_capabilities_free/create and can already remove the function
pointers at the next major bump; given that the documentation explicitly
states that av_device_capabilities is not to be used by a user, it's
options can already be removed (save for the sentinel).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
A new key & value API lets us gain access to newly added parameters
without adding explicit support for them in our wrapper. Add an
option utilizing this functionality in a similar manner to other
encoder libraries' wrappers.
Signed-off-by: Bohan Li <bohanli@google.com>
In order to fine-control referencing schemes in VP9 encoding, there
is a need to use VP9E_SET_SVC_REF_FRAME_CONFIG method. This commit
provides a way to use the API through frame metadata.
The AC3 encoder used to be a separate library called "Aften", which
got merged into libavcodec (literally, SVN commits and all).
The merge preserved as much features from the library as possible.
The code had two versions - a fixed point version and a floating
point version. FFmpeg had floating point DSP code used by other
codecs, the AC3 decoder including, so the floating-point DSP was
simply replaced with FFmpeg's own functions.
However, FFmpeg had no fixed-point audio code at that point. So
the encoder brought along its own fixed-point DSP functions,
including a fixed-point MDCT.
The fixed-point MDCT itself is trivially just a float MDCT with a
different type and each multiply being a fixed-point multiply.
So over time, it got refactored, and the FFT used for all other codecs
was templated.
Due to design decisions at the time, the fixed-point version of the
encoder operates at 16-bits of precision. Although convenient, this,
even at the time, was inadequate and inefficient. The encoder is noisy,
does not produce output comparable to the float encoder, and even
rings at higher frequencies due to the badly approximated winow function.
Enter MIPS (owned by Imagination Technologies at the time). They wanted
quick fixed-point decoding on their FPUless cores. So they contributed
patches to template the AC3 decoder so it had both a fixed-point
and a floating-point version. They also did the same for the AAC decoder.
They however, used 32-bit samples. Not 16-bits. And we did not have
32-bit fixed-point DSP functions, including an MDCT. But instead of
templating our MDCT to output 3 versions (float, 32-bit fixed and 16-bit fixed),
they simply copy-pasted their own MDCT into ours, and completely
ifdeffed our own MDCT code out if a 32-bit fixed point MDCT was selected.
This is also the status quo nowadays - 2 separate MDCTs, one which
produces floating point and 16-bit fixed point versions, and one
sort-of integrated which produces 32-bit MDCT.
MIPS weren't all that interested in encoding, so they left the encoder
as-is, and they didn't care much about the ifdeffery, mess or quality - it's
not their problem.
So the MDCT/FFT code has always been a thorn in anyone looking to clean up
code's eye.
Backstory over. Internally AC3 operates on 25-bit fixed-point coefficients.
So for the floating point version, the encoder simply runs the float MDCT,
and converts the resulting coefficients to 25-bit fixed-point, as AC3 is inherently
a fixed-point codec. For the fixed-point version, the input is 16-bit samples,
so to maximize precision the frame samples are analyzed and the highest set
bit is detected via ac3_max_msb_abs_int16(), and the coefficients are then
scaled up via ac3_lshift_int16(), so the input for the FFT is always at least 14 bits,
computed in normalize_samples(). After FFT, the coefficients are scaled up to 25 bits.
This patch simply changes the encoder to accept 32-bit samples, reusing
the already well-optimized 32-bit MDCT code, allowing us to clean up and drop
a large part of a very messy code of ours, as well as prepare for the future lavu/tx
conversion. The coefficients are simply scaled down to 25 bits during windowing,
skipping 2 separate scalings, as the hacks to extend precision are simply no longer
necessary. There's no point in running the MDCT always at 32 bits when you're
going to drop 6 bits off anyway, the headroom is plenty, and the MDCT rounds
properly.
This also makes the encoder even slightly more accurate over the float version,
as there's no coefficient conversion step necessary.
SIZE SAVINGS:
ARM32:
HARDCODED TABLES:
BASE - 10709590
DROP DSP - 10702872 - diff: -6.56KiB
DROP MDCT - 10667932 - diff: -34.12KiB - both: -40.68KiB
DROP FFT - 10336652 - diff: -323.52KiB - all: -364.20KiB
SOFTCODED TABLES:
BASE - 9685096
DROP DSP - 9678378 - diff: -6.56KiB
DROP MDCT - 9643466 - diff: -34.09KiB - both: -40.65KiB
DROP FFT - 9573918 - diff: -67.92KiB - all: -108.57KiB
ARM64:
HARDCODED TABLES:
BASE - 14641112
DROP DSP - 14633806 - diff: -7.13KiB
DROP MDCT - 14604812 - diff: -28.31KiB - both: -35.45KiB
DROP FFT - 14286826 - diff: -310.53KiB - all: -345.98KiB
SOFTCODED TABLES:
BASE - 13636238
DROP DSP - 13628932 - diff: -7.13KiB
DROP MDCT - 13599866 - diff: -28.38KiB - both: -35.52KiB
DROP FFT - 13542080 - diff: -56.43KiB - all: -91.95KiB
x86:
HARDCODED TABLES:
BASE - 12367336
DROP DSP - 12354698 - diff: -12.34KiB
DROP MDCT - 12331024 - diff: -23.12KiB - both: -35.46KiB
DROP FFT - 12029788 - diff: -294.18KiB - all: -329.64KiB
SOFTCODED TABLES:
BASE - 11358094
DROP DSP - 11345456 - diff: -12.34KiB
DROP MDCT - 11321742 - diff: -23.16KiB - both: -35.50KiB
DROP FFT - 11276946 - diff: -43.75KiB - all: -79.25KiB
PERFORMANCE (10min random s32le):
ARM32 - before - 39.9x - 0m15.046s
ARM32 - after - 28.2x - 0m21.525s
Speed: -30%
ARM64 - before - 36.1x - 0m16.637s
ARM64 - after - 36.0x - 0m16.727s
Speed: -0.5%
x86 - before - 184x - 0m3.277s
x86 - after - 190x - 0m3.187s
Speed: +3%
Add 2 new options:
- reconnect_on_http_error - a list of http status codes that should be
retried. the list can contain explicit status codes / the strings
4xx/5xx.
- reconnect_on_network_error - reconnects on arbitrary errors during
connect, e.g. ECONNRESET/ETIMEDOUT
the retry employs the same exponential backoff logic as the existing
reconnect/reconnect_at_eof flags.
related tickets:
https://trac.ffmpeg.org/ticket/6066https://trac.ffmpeg.org/ticket/7768
Signed-off-by: Marton Balint <cus@passwd.hu>
Do it only when requested with the AV_CODEC_EXPORT_DATA_VIDEO_ENC_PARAMS
flag.
Drop previous code using the long-deprecated AV_FRAME_DATA_QP_TABLE*
API. Temporarily disable fate-filter-pp, fate-filter-pp7,
fate-filter-spp. They will be reenabled once these filters are converted
in following commits.
because hls_enc_key and hls_enc_iv get 16byte char
for example:
-hls_enc_key 0123456789abcdef -hls_enc_iv abcdefghijklmnop
Reviewed-by: Gyan Doshi <ffmpeg@gyani.pro>
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
At present, progress stats are updated at a hardcoded interval of
half a second. For long processes, this can lead to bloated
logs and progress reports.
Users can now set a custom period using option -stats_period
Default is kept at 0.5 seconds.
The cropdetect filter, at present, skips the first two frames. This
behaviour is hardcoded.
New option 'skip' allows users to change this. Convenient for when
input is a single image or a trimmed video stream.
Default is kept at 2 to preserve current behaviour.
the init.mp4 can be expanded with strftime the same way as
hls_segment_filename.
Signed-off-by: Nikola Pajkovsky <nikola@pajkovsky.cz>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
Also changes some default values for options after this change.
This makes distinction between feedback and wet option.
Before they would produce same output if values were swapped.
They add considerable complexity to frame-threading implementation,
which includes an unavoidably leaking error path, while the advantages
of this option to the users are highly dubious.
It should be always possible and desirable for the callers to make their
get_buffer2() implementation thread-safe, so deprecate this option.
This patch introduces a new frame side data type AVFilmGrainParams for use
with video codecs which support it.
It can save a lot of memory used for duplicate processed reference frames and
reduce copies when applying film grain during presentation.
This patch adds a select_region option to the xcbgrab input device.
If set to 1, the user will be prompted to select the grabbing area
graphically by clicking and dragging. A rectangle will be drawn to
mark the grabbing area. A single click with no dragging will select
the whole screen. The option overwrites the video_size, grab_x, and
grab_y options if set by the user.
For testing, just set the select_region option as follows:
ffmpeg -f x11grab -select_region 1 -i :0.0 output.mp4
The drawing happens directly on the root window using standard rubber
banding techniques, so it is very efficient and doesn't depend on any
X extensions or compositors.
Reviewed-by: Andriy Gelman <andriy.gelman@gmail.com>
Signed-off-by: Omar Emara <mail@OmarEmara.dev>
This way the old max queue size limit based behavior for streams
where each individual packet is large is kept, while for smaller
streams more packets can be buffered (current default is at 50
megabytes per stream).
For some explanation, by default ffmpeg copies packets from before
the appointed seek point/start time and puts them into the local
muxing queue. Before, it getting utilized was much less likely
since as soon as the filter chain was initialized, the encoder
(and thus output stream) was also initialized.
Now, since we will be pushing the encoder initialization to when the
first AVFrame is decoded and filtered - which only happens after
the exact seek point is hit as packets are ignored until then -
this queue will be seeing much more usage.
In more layman's terms, this attempts to fix cases such as where:
- seek point ends up being 5 seconds before requested time.
- audio is set to copy, and thus immediately begins filling the
muxing queue.
- video is being encoded, and thus all received packets are skipped
until the requested time is hit.
then we can set the rtp read timeout instead of infinite timeout.
How to test(5s timeout):
./ffprobe -i rtp://192.168.1.67:1234?timeout=5000000
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
The manual states "there is virtually no reason to use that encoder.".
It supports less sample formats than the native encoder, is less efficient
than the native encoder and is also slower and pretty much remains untested.
libwavpack also isn't being fuzzed, which given that we plug the parameters
without any sanitizing them looks concerning.
A common pattern e.g. in libavcodec is replacing/updating buffer
references: unref old one, ref new one. This function allows simplifying
such code and avoiding unnecessary refs+unrefs if the references are
already equivalent.
Allow to set the EOF timestamp.
Also: doc/filters/testsrc*: specify the rounding of the duration option.
The changes in the ref files are right.
For filter-fps-down, the graph is testsrc2=r=7:d=3.5,fps=3.
3.5=24.5/7, so the EOF of testsrc2 will have PTS 25/7.
25/7=(10+5/7)/3, so the EOF PTS for fps should be 11/7,
and the output should contain a frame at PTS 10.
For filter-fps-up, the graph is testsrc2=r=3:d=2,fps=7,
for filter-fps-up-round-down and filter-fps-up-round-up
it is the same with explicit rounding options.
But there is no rounding: testsrc2 produces exactly 6 frames
and 2 seconds, fps converts it into exactly 14 frames.
The tests should probably be adjusted to restore them to
a useful coverage.
Expressions for option fontsize of video filter drawtext have been
supported since commit 6442e4ab3c.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Revised-by: Gyan Doshi <ffmpeg@gyani.pro>
This patch allows setting a compression ratio and to
set multiple layers. The user has to input a compression
ratio for each layer.
The per layer compression ration can be set as follows:
-layer_rates "r1,r2,...rn"
for to create 'n' layers.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
