Directed to the AviSynth+ entry on AviSynth Wiki rather than to
the github repository, since the wiki page is both more informative
and has the relevant Git/download links. The github releases page
is little more than a changelog.
Cleanup the applehttp as demuxer name, when use the command :
ffmpeg -formats, get the confused information like:
"
E hls Apple HTTP Live Streaming
D hls,applehttp Apple HTTP Live Streaming
"
we don't use applehttp as the demuxer/muxer name usually, so
cleanup the applehttp and update the documents.
After the change, get the information from "ffmpeg -formats":
"
DE hls Apple HTTP Live Streaming
"
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Fix ticket #7297
The current setting for send-expect-100 option is either
enabled if applicable or forced enabled, no option to force
disable the header. This change is to expand the option setting
to provide more flexibility, which is useful for rstp case.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The lensfun filter wraps the lensfun library which performs
transformations on videos to correct for lens distortion. Often this
results in areas in the input being mapped to areas that fall outside
the boundaries of the output. The library has a parameter called scale
which is a scale factor applied to the output video. By decreasing it it
is possible to regain the areas of the video which would otherwise have
been lost. There is a special value of 0 which indicates that the
library should automatically determine a scale factor that results in
the output frame being filled (i.e. little or no black/unmapped areas).
This patch adds a corresponding scale option to the lensfun filter which
is passed through to the library. The existing behaviour of using the
automatic value of 0 is retained as the default behaviour, while other
values will be passed through to the library.
Signed-off-by: Daniel Playfair Cal <daniel.playfair.cal@gmail.com>
Nobody is going to check the queue anymore, so users must now subscribe to
send messages to ffmpeg-devel. This will prevent orphaned/ignored messages
from rotting in the abandoned queue. This matches the behavior of ffmpeg-user
and libav-user.
Also, this addresses some other nits.
Signed-off-by: Lou Logan <lou@lrcd.com>
set_metadata with many entries is not very efficient, and with small audio
frames the performance loss is noticable. Also with this very simple
calculations (like peak) can be even further optimized.
Unfoturnately there are some small differences in metadata and av_log info
output, so factorizing calculations and output might not worth the hassle.
Signed-off-by: Marton Balint <cus@passwd.hu>
This removes lots of code duplication and also allows more complex specifiers,
for example you can use p:204:aⓂ️language:eng to select the English language
audio stream from program 204.
Signed-off-by: Marton Balint <cus@passwd.hu>
* Outputs ASS lines with basic coloring and font scaling for each
given region.
* Sets the default style to the resolution of the subtitle plane
(for example, 960x540 / 36pt font for profile A).
* Has options to:
* Disable ruby text (which is coded as regions which have
half-height text in libaribb24).
Enabled by default as without positioning ruby text only
confuses as it is usually coded in the beginning of the decoded
subtitle line.
* Set the working directory, in which libaribb24 will read
configuration as well as into which it may save broadcast extra
symbols as PNG.
Unset by default.
The unconventional library check can be explained by the library's
current master branch being licensed as LGPLv3, but at the time of
writing the latest official release is still licensed under GPLv3.
Thus, one either has to wait for the following release, or enable
GPLv3.
This attaches the logic of picking the mode of for the next picture to
the output, which simplifies some choices by removing the concept of
the picture for which input is not yet available. At the same time,
we allow more complex reference structures and track more reference
metadata (particularly the contents of the DPB) for use in the
codec-specific code.
It also adds flags to explicitly track the available features of the
different codecs. The new structure also allows open-GOP support, so
that is now available for codecs which can do it.
The encoders such as libx264 support different QPs offset for different MBs,
it makes possible for ROI-based encoding. It makes sense to add support
within ffmpeg to generate/accept ROI infos and pass into encoders.
Typical usage: After AVFrame is decoded, a ffmpeg filter or user's code
generates ROI info for that frame, and the encoder finally does the
ROI-based encoding.
The ROI info is maintained as side data of AVFrame.
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This commit adds configuration options to libvpxenc.c that can be used to
tune the sharpness parameter for VP8 and VP9.
Signed-off-by: Rene Claus <rclaus@google.com>
Signed-off-by: James Zern <jzern@google.com>
Apple doesn't have an official spec for LHLS. Meanwhile hls.js player folks are
trying to standardize a open LHLS spec. The draft spec is available in https://github.com/video-dev/hlsjs-rfcs/blob/lhls-spec/proposals/0001-lhls.md
This option will also try to comply with the above open spec, till Apple's spec officially supports it.
Applicable only when @var{streaming} and @var{hls_playlist} options are enabled.
When dashenc has to run for long duration(say 24x7 live stream), one can enable this option to ignore the io failure of few segment's upload due to an intermittent network issues.
When the network connection recovers dashenc will continue with the upload of the current segments, leading to the recovery of the stream.
The file name template options now support a new "$ext$" placeholder,
which is replaced with a filename extension specific for the selected
file format. This is useful for the new "auto" format mode, when
different streams may use different file formats, and it is not
possible to specify the correct file name extension exactly.
Resolves warnings in the log about webm segments not having webm extensions.
This commit restores the ability to create DASH streams with codecs
that require different containers that was lost after commit
2efdbf7367. It adds a new "auto" value for
the dash_segment_type option and makes it the default. When in this mode,
the segment format will be chosen based on the codec used in the stream:
webm for Vorbis, Opus, VP8 or VP9, mp4 otherwise.
This commit adds configuration options to libvpxenc.c that can be used to
enable VP8 temporal scalability. It also adds a way to programmatically set the
per-frame encoding flags which can be used to control usage and updates of
reference frames while encoding with temporal scalability enabled.
Signed-off-by: James Zern <jzern@google.com>
This is a cuda implementation of yadif, which gives us a way to
do deinterlacing when using the nvdec hwaccel. In that scenario
we don't have access to the nvidia deinterlacer.
This fixes the grammar of two HLS option descriptions and makes them less
ambiguous.
Signed-off-by: Werner Robitza <werner.robitza@gmail.com>
Signed-off-by: Lou Logan <lou@lrcd.com>
This is needed because of 32bit float formats (which are difficult to
store in 16bits)
This also fixes undefined behavior found by fate
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This adds common code to query driver support and set appropriate
address/size information for each slice. It only supports rectangular
slices for now, since that is the most common use-case.
Several SRT options are missing. Since pkg_config requires libsrt v1.3.0 and above, it should be able to support options added in libsrt v1.3.0 and below.
This commit adds 8 SRT options.
sndbuf, rcvbuf, lossmaxttl, minversion, streamid, smoother, messageapi and transtype
The keys of option are equivalent to stransmit.
https://github.com/Haivision/srt/blob/v1.3.0/apps/socketoptions.hpp#L196-L223
Signed-off-by: Marton Balint <cus@passwd.hu>
Allows arrangement of multiple windows such as:
ffmpeg -re -f lavfi -i mandelbrot -f sdl -window_x 1 -window_y 1 mandelbrot -vf waveform,format=yuv420p -f sdl -window_x 641 -window_y 1 waveform -vf vectorscope,format=yuv420p -f sdl -window_x 1 -window_y 481 vectorscop
Some changes by Marton Balint:
- allow negative position (partially or fully out-of-screen positions seem to
be sanitized automatically by SDL (or my WM?), so no special handling is
needed)
- only show window after the position is set
- do not use resizable and borderless flags at the same time, that caused
issues in ffplay
- add docs
Signed-off-by: Marton Balint <cus@passwd.hu>
The existing av_mediacodec_release_buffer allows the user to render
or discard the Surface-backed frame. This new method allows the user
to control exactly when the frame will be rendered to its SurfaceView.
Available since Android API 21.
Signed-off-by: Aman Gupta <aman@tmm1.net>
This allows switching between absolute (LUFS) and relativ (LU) display
in the status line.
Signed-off-by: Daniel Molkentin <daniel@molkentin.de>
Signed-off-by: Conrad Zelck <c.zelck@imail.de>
This eases meeting the target level during live mixing.
Signed-off-by: Daniel Molkentin <daniel@molkentin.de>
Signed-off-by: Conrad Zelck <c.zelck@imail.de>
Allow to show short-term instead of momentary in gauge. Useful for monitoring
whilst live mixing.
Signed-off-by: Daniel Molkentin <daniel@molkentin.de>
Signed-off-by: Conrad Zelck <c.zelck@imail.de>
This allows getting data only from a specific source IP. This is useful not
only for unicast but for multicast as well because multicast source
subscriptions do not act as source filters for the incoming packets.
Signed-off-by: Marton Balint <cus@passwd.hu>
This option is useful for maintaining input synchronization across N
different hardware devices deployed for 'N-way' redundancy.
The system time of different hardware devices should be synchronized
with protocols such as NTP or PTP, before using this option.
Signed-off-by: Marton Balint <cus@passwd.hu>
Also bump the API version requirement to 10.9.5, because on olders versions
there were some reports of crashes using the undocumented, yet available
BMDDeckLinkDeviceHandle.
Signed-off-by: Marton Balint <cus@passwd.hu>
Sets the level based on the stream properties if it is not explicitly
set by the user. Also add a tier option to set general_tier_flag, since
that affects the level choice.
This was added in libva 2.1.0 (VAAPI 1.1.0). Use AVCodecContext.qmax,
matching the existing behaviour for qmin, and clean up the defaults so
that we only pass min/max when explicitly set.
Query which modes are supported and select between VBR and CBR based
on that - this removes all of the codec-specific rate control mode
selection code.
Previously there was one fixed choice for each codec (e.g. H.265 -> Main
profile), and using anything else then required an explicit option from
the user. This changes to selecting the profile based on the input format
and the set of profiles actually supported by the driver (e.g. P010 input
will choose Main 10 profile for H.265 if the driver supports it).
The entrypoint and render target format are also chosen dynamically in the
same way, removing those explicit selections from the per-codec code.
Create a new AVPacket side data type for Active Format Description,
which mirrors the side data type found in AVFrame. The primary
use case for this is ensuring AFD gets preserved in the V210
encoder, so that the decklink libavdevice can output AFD.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Also make sure we set the URL context max packet size accordingly.
Based on a patch by Tudor Suciu <tudor.suciu@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
AV_CODEC_FLAG_GLOBAL_HEADER should be set before calling avcodec_open2() to have any effect.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
ISMV lacks any sort of edit list support, as well as tfxd is
effectively the PTS of the fragment for most intents and purposes.
Thus, if b-frames are requested without negative CTS offsets you
end up with N frames' worth of delay (tfxd PTS plus the CTS offset
of the first sample). Negative CTS offsets enable the first sample
to have CTS=DTS, and thus a/v desync due to b-frame reorder delay
is avoided.
Existing link is broken.
This patch updates the existing url with a working one.
Signed-off-by: Mina <minasamy_@hotmail.com>
Signed-off-by: Gyan Doshi <ffmpeg@gyani.pro>
Lensfun is a library that applies lens correction to an image using a
database of cameras/lenses (you provide the camera and lens models, and
it uses the corresponding database entry's parameters to apply lens
correction). It is licensed under LGPL3.
The lensfun filter utilizes the lensfun library to apply lens
correction to videos as well as images.
This filter was created out of necessity since I wanted to apply lens
correction to a video and the lenscorrection filter did not work for me.
While this filter requires little info from the user to apply lens
correction, the flaw is that lensfun is intended to be used on indvidual
images. When used on a video, the parameters such as focal length is
constant, so lens correction may fail on videos where the camera's focal
length changes (zooming in or out via zoom lens). To use this filter
correctly on videos where such parameters change, timeline editing may
be used since this filter supports it.
Note that valgrind shows a small memory leak which is not from this
filter but from the lensfun library (memory is allocated when loading
the lensfun database but it somehow isn't deallocated even during
cleanup; it is briefly created in the init function of the filter, and
destroyed before the init function returns). This may have been fixed by
the latest commit in the lensfun repository; the current latest release
of lensfun is almost 3 years ago.
Bi-Linear interpolation is used by default as lanczos interpolation
shows more artifacts in the corrected image in my tests.
The lanczos interpolation is derived from lenstool's implementation of
lanczos interpolation. Lenstool is an app within the lensfun repository
which is licensed under GPL3.
v2 of this patch fixes license notice in libavfilter/vf_lensfun.c
v3 of this patch fixes code style and dependency to gplv3 (thanks to
Paul B Mahol for pointing out the mentioned issues).
v4 of this patch fixes more code style issues that were missed in
v3.
v5 of this patch adds line breaks to some of the documentation in
doc/filters.texi (thanks to Gyan Doshi for pointing out the issue).
v6 of this patch fixes more problems (thanks to Moritz Barsnick for
pointing them out).
v7 of this patch fixes use of sqrt() (changed to sqrtf(); thanks to
Moritz Barsnick for pointing this out). Also should be rebased off of
latest master branch commits at this point.
Signed-off-by: Stephen Seo <seo.disparate@gmail.com>
