av_dynarray_add_nofree function have similar functionality
as existing av_dynarray_add, but it doesn't deallocate memory
on fails.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
* commit 'd161ae0a37900cbd36c1390ca32a56b892c02ab5':
frame: add a function for removing side data from a frame
Conflicts:
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5a7e35dd2351c30bab45177b9482cb8833a0ca78':
Add replaygain side data type and code for parsing replaygain tags.
Conflicts:
libavcodec/avcodec.h
libavcodec/version.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '25b32586566f285d797737863c97a1c5c9c84e2b':
lavf: add an AVStream field for exporting stream-global side data
Conflicts:
libavformat/utils.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0e2c3ee9a335d8a0a5edf0509e222e804d7b2619':
lavc: give a typedeffed name to the AVPacket.side_data struct
Conflicts:
doc/APIchanges
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1481d24c3a0abf81e1d7a514547bd5305232be30':
RGBA64 pixel formats
Conflicts:
doc/APIchanges
libavutil/pixdesc.c
libavutil/pixfmt.h
libavutil/version.h
libswscale/utils.c
See: 9569a3c9f4
See: 92afb43162, as well as others
Note: the enum values added in libav are incompatible/different to what ffmpeg used since 3 years
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For muxing, it accepts
both 0 and AV_NOPTS_VALUE. For demuxing, it will present
AV_NOPTS_VALUE when start_time_realtime is unknown.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1155fd02ae7bac215acab316e847c6bb25f74fc3':
frame: add a convenience function for copying AVFrame data
Conflicts:
doc/APIchanges
libavutil/frame.c
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7e86c27b4ee9e5a3fbe6cf5249b9d918b2a5e731':
lavr: add a function for checking whether AVAudioResampleContext is open
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd711d839ca6714a5ef5b53ee51bc7632e62cf203':
doc/APIchanges: fill in missing hashes and dates
Conflicts:
doc/APIchanges
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently ff_interleave_packet_per_dts() waits until it gets a frame for
each stream before outputting packets in interleaved order.
Sparse streams (i.e. streams with much fewer packets than the other
streams, like subtitles or audio with DTX) tend to add up latency and in
specific cases end up allocating a large amount of memory.
Emit the top packet from the packet_buffer if it has a time delta
larger than a specified threshold.
Original report of the issue and initial proposed solution by
mus.svz@gmail.com.
Bug-id: 31
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '5b4797a21db900b7d509660b7a4d49829089b004':
avframe: add AV_FRAME_DATA_MATRIXENCODING side data type.
Conflicts:
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5c437fb':
lavu: Add values for various Dolby flags to the AVMatrixEncoding enum.
Conflicts:
doc/APIchanges
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit 792845e436, reversing
changes made to 1d6666a6b8.
Bumping libavutil requires all libraries that use libavutil to have their
major version bumped (yes breakage has been confirmed this is not a hypotheses)
One case of breakage is due to new types being added to AVOptions and
applications that linked to old libavutil and libswresample
then trying to use old libavutil (its soname changed so the old isnt updated)
and new swresample (its soame didnt change so it is updated)
the new swresample contains AVOption types that the old libavutil doesnt
know of thus the application attempting to access these avoptions
fails
AVOptions are used by all libs so the issue can potentially happen with
any other lib, libswresample was just the first that showed the problem
ive not checked if the other libs are affected currently by the same issue
or not
Also in addition to AVOptions, AVFrames are also defined in
libavutil, bumping it without all libs that use AVFrames could lead to
serious inconsistencies when 2 libs/app end up using 2 different libavutils
The alternative of bumping all is still possible after this revert, if it
turns out to be the preferred solution
* commit '6d3ea1957f681b3bf9c752e6d21a501cc8d4180d':
Bump major of libavfilter for reference counted buffer API changes.
Conflicts:
libavfilter/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3bc2e89c76e88ae6f1fd5287e0b11abcfc3c601c':
Bump libavutil major version to account for the LLS API/ABI changes.
Conflicts:
libavutil/version.h
Bump done to stay compatible with libav, its not neccessary otherwise for ffmpeg
as we have the new ABI/API under LLS2 and the old (unused) under LLS
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Applications that have been linked against an older release of Libav and pick up
updated libraries experience segmentation faults because they pick up the new
libavfilter, which assumes AVFrames have been allocated by libavutil and thus
contain new reference-counting related fields. This will break for AVFrames that
have been allocated by old libavcodec.
All scheduled API changes are deferred to the next bump.
Commit 41578f70cf changed the LLS API, which was
called from libavcodec. Thus using an old libavcodec with a new libavutil will
break.
All scheduled API changes are deferred to the next bump.
Also the libavutil/ffversion.h will be installed.
Rationale:
* Applications might want to know FFmpeg's version besides the individual
libraries'.
* Avoids file name clash between FFmpeg's ./version.h and lib*/version.h when
a library source file includes both and is compiled on an out-of-tree build.
Fixes#1769.
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1eaac1d6f7bb8e52d82e1a114c88a59a9a8e5025':
mpeg12dec: Extract CC user data into frame side data
Conflicts:
doc/APIchanges
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8941971a8f2e24b9a84fe29f128d13ceb89c0a65':
lavc: make error_rate a private option of mpegvideo encoders
Conflicts:
libavcodec/options_table.h
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '728c4658563dc82115ade0f1679679eddb7be5ff':
vdpau: add a constructor for AVVDPAUContext.
Conflicts:
libavcodec/vdpau.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ca22d1dea2842fca0422dd1d2bd09e7eb2c8f118':
vdpau: add a convenience function for getting a decoder profile.
Conflicts:
doc/APIchanges
libavcodec/vdpau.c
libavcodec/vdpau.h
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
fopen() on windows uses UTF-16, we use UTF-8 everywhere, this
function bridges the gap by using avpriv_open()
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '28096e0a806e57376541e6222d315619906e3c55':
h264: wait for initial complete frame before outputing frames
Conflicts:
doc/APIchanges
libavcodec/h264.c
libavcodec/mpegvideo.h
libavutil/frame.h
libavutil/version.h
See: a64b028aeb (as well as various later commits)
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This can be optionally disabled whith the "output_corrupt" flags
option. When in "output_corrupt" mode, incomplete frames are
signalled through AVFrame.flags FRAME_FLAG_INCOMPLETE_FRAME.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This patch adds CODEC_CAP_DELAY support to avcodec_decode_subtitle2.
For DVB teletext decoding, a single teletext packet can contain multiple
teletext pages. In order to support that, the teletext decoder may buffer
some pages.
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
previously only codec_ids could be forced, which did not allow
forcing a specific implementation like libopenjpeg vs jpeg2000.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows specifying more dither algorithms without using up flags and
without ambiguities.
Also initialize the new field based on the flags and use it.
Note, improving the logic of the checks is left to subsequent
commits, this here only switches from flags to enum.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Using VDPAU correctly means checking for preemption
and possibly regenerating the context all the time.
With the current API there is no context or other
user-defined pointer and thus this in not possible
during decoding unless using some hack like global
variables.
The need to reinitialize both surfaces and even function
pointers makes handling preemption even more difficult.
This patch introduces a new render2 function that gets
both the AVCodecContext and AVFrame in addition,
in both the user can store additional opaque data.
This allows even advanced approaches like keeping a
"generation counter" for the surfaces so they can be
regenerated on the fly and efficiently.
In addition, the function has a return value that will
be passed through all the way instead of being silently
ignored as for the current render function.
Unfortunately the HWAccel API has no way of providing
API/ABI compatibility, so a currently disallowed
state (render pointer being NULL) is used to extend it.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The bitstream buffers are now private and freed by libavcodec. For
backward compatibility, the hold bitstream buffer pointer is left NULL
(applications were supposed to av_freep() it).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Add function avfilter_graph_parse_ptr() and favor it in place of
avfilter_graph_parse(), which will be restored with the old/Libav
signature at the next bump.
If HAVE_INCOMPATIBLE_LIBAV_API is enabled it will use the
Libav-compatible signature for avfilter_graph_parse().
At the next major bump the current implementation of
avfilter_graph_parse() should be dropped in favor of the Libav/old
implementation.
Should address trac ticket #2672.
There are 4 separate WebVTT text track kinds: subtitles (the default
if not otherwise specified), captions, descriptions, and metadata.
The WebM muxer needs to know which WebVTT text track kind this is, in
order to synthesize the correct track type and codec id.
To allow a demuxer to indicate the text track kind of the input, a new
set of AV_DISPOSITION flag values has been added, corresponding to
each of the non-default text track kind values.
* commit '3b4feac1ec14f861bdd7f494f288f4d8dd7f449e':
movenc: Keep track of the allocated size for the cluster array
mem: Add av_realloc_array and av_reallocp_array
Conflicts:
doc/APIchanges
libavformat/movenc.c
libavutil/mem.c
libavutil/mem.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
With the introduction of AVFilterContext->is_disabled, we can simplify
the custom passthrough mode in filters.
This commit is technically a small compat break, but the timeline was
introduced very recently.
Doxy by Stefano Sabatini.
* commit '507b1e454cf9953da3e18f33c9bd1fca78c97cb5':
avcodec: Add field order information to AVCodecParserContext.
Conflicts:
doc/APIchanges
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA
markup is muxed in a standalone .ass/.ssa file. This means the AVPacket
data starts with a "Dialogue:" string, followed by a timing information
(start and end of the event as string) and a trailing CRLF after each
line. One packet can contain several lines. We'll refer to this layout
as "SSA" or "SSA lines".
In matroska, this markup is not stored as such: it has no "Dialogue:"
prefix, it contains a ReadOrder field, the timing information is not in
the payload, and it doesn't contain the trailing CRLF. See [1] for more
info. We'll refer to this layout as "ASS".
Since we have only one common codec for both formats, the matroska
demuxer is constructing an AVPacket following the "SSA lines" format.
This causes several problems, so it was decided to change this into
clean ASS packets.
Some insight about what is changed or unchanged in this commit:
CODECS
------
- the decoding process still writes "SSA lines" markup inside the ass
fields of the subtitles rectangles (sub->rects[n]->ass), which is
still the current common way of representing decoded subtitles
markup. It is meant to change later.
- new ASS codec id: AV_CODEC_ID_ASS (which is different from the
legacy AV_CODEC_ID_SSA)
- lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of
"ass") for consistency with the codec id and allows to add a real
ass decoder. This ass decoder receives clean ASS lines (so it starts
with a ReadOrder, is followed by the Layer, etc). We make sure this
is decoded properly in a new ass-line rectangle of the decoded
subtitles (the ssa decoder OTOH is doing a simple straightforward
copy). Using the packet timing instead of data string makes sure the
ass-line now contains the appropriate timing.
- lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed
into "ssa" (instead of "ass") for consistency with the codec id, and
allows to add a real "ass" encoder.
One important thing about this encoder is that it only supports one
ass rectangle: we could have put several dialogue events in the
AVPacket (separated by a \0 for instance) but this would have cause
trouble for the muxer which needs not only the start time, but also
the duration: typically, you have merged events with the same start
time (stored in the AVPacket->pts) but a different duration. At the
moment, only the matroska do the merge with the SSA-line codec.
We will need to make sure all the decoders in the future can't add
more than one rectangle (and only one Dialogue line in it
obviously).
FORMATS
-------
- lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets.
In the case of ASS packets as input, it adds the timing based on the
AVPacket pts and duration, and mux it with "Dialogue:", trailing
CRLF, etc.
- lavf/assdec: unchanged; it currently still only outputs SSA-lines
packets.
- lavf/mkv: the demuxer can now output ASS packets without the need of
any "SSA-lines" reconstruction hack. It will become the default at
next libavformat bump, and the SSA support will be dropped from the
demuxer. The muxer can take ASS packets since it's muxed normally,
and still supports the old SSA packets. All the SSA support and
hacks in Matroska code will be dropped at next lavf bump.
[1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
* commit 'fa2a34cd40d124161c748bb0f430dc63c94dd0da':
lavfi: change the filter registering system to match the other libraries
Conflicts:
cmdutils.c
ffplay.c
libavfilter/avfilter.c
libavfilter/avfilter.h
This removes the ability to put AVFilters in read only memory and having
them shareable.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7e8fe4be5fb4c98aa3c6a4ed3cec999f4e3cc3aa':
lavfi: add a function for counting elements in AVFilterPad arrays.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7cdd737ba81b5c2c9521c4509edf0ac315fabc65':
lavfi: mark filters with dynamic number of inputs or outputs with special flags
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1ba95a9cca57b023b9b9de071a5671fc05b05e58':
lavfi: add avfilter_init_dict() for initializing a filter with a dict.
Conflicts:
libavfilter/avfilter.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add av_int_list_length() to compute a list length.
Add av_opt_set_int_list() to set a binary option.
Signed-off-by: Nicolas George <nicolas.george@normalesup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '48a5adab62bd2a553f5069d41fa632a0701835e5':
lavfi: add avfilter_init_str() to replace avfilter_init_filter().
avfilter_graph_create_filter() opaque is still passed to avfilter_init_filter()
which continues to pass it to init_opaque as its still used in the buffer sinks
the sinks should be changed and the opaque passing removed
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Since this function adds a standalone filter to a filter graph and we do
not support creating such filters, there is no reason for this function
to exist.
Since we do not support "standalone" filters not attached to an
AVFilterGraph, we should not have a public function to create such
filters. In addition that function is horribly named, the action it does
cannot be possibly described as "opening" a filter.
* commit '2e81acc687e64d15dd93c74793060bb5a233f44d':
x86inc: Fix number of operands for cmp* instructions
af_channelmap: fix uninitialized variable use introduced in ba8efac977
lavfi: add a bump and docs entries for the AVOptions switch
Conflicts:
Changelog
doc/APIchanges
libavfilter/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2c328a907978b61949fd20f7c991803174337855':
pixdesc: add a function for counting planes in a pixel format.
avplay: remove the -debug option.
Revert "asfenc: return error on negative timestamp"
Conflicts:
doc/APIchanges
doc/ffplay.texi
ffplay.c
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'efa7f4202088c70caba11d7834641bc6eaf41830':
Use the avstring.h locale-independent character type functions
avstring: Add locale independent versions of some ctype.h functions
Conflicts:
avprobe.c
doc/APIchanges
libavcodec/dvdsubdec.c
libavcodec/utils.c
libavutil/avstring.c
libavutil/avstring.h
libavutil/eval.c
libavutil/parseutils.c
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The escape API will be useful to perform escaping programmatically, which
is required when crafting argument strings, and will be used for context
printing as well.
This is based on the ffescape tool code, with a few extensions and fixes.
* commit 'ab2ad8bd56882c0ea160b154e8b836eb71abc49d':
lavf: Add functions for SRTP decryption/encryption
lavu: Add an API for calculating HMAC (RFC 2104)
Conflicts:
doc/APIchanges
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '44e065d56c87d6a9d0effccec5f31517f72924ec':
vdpau: Add context and common helpers for hwaccel support
Conflicts:
Changelog
doc/APIchanges
libavcodec/vdpau.h
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Add version bump and APIchanges entry for Add AV_PIX_FMT_VDPAU.
pixfmt: add picture format for VDPAU
Conflicts:
doc/APIchanges
libavutil/pixfmt.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1fb8f6a44f06e48386450fe0363aefc02583d24a':
x86: lavr: add SSE2 quantize() for dithering
doc/APIchanges: fill in missing dates and hashes.
rtpdec_vp8: Request a keyframe if RTP packets are lost
Conflicts:
doc/APIchanges
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '074a00d192c0e749d677b008b337da42597e780f':
lavr: add a public function for setting a custom channel map
lavr: typedef internal structs in internal.h
doc: Extend commit message section
Conflicts:
doc/APIchanges
doc/developer.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6dd93ee6f1b050ad7c4b247899e83efa293ee405':
hlsenc: check append_entry return value
hlsenc: use the basename to generate the list entries
avstring: add av_basename and av_dirname
Conflicts:
Changelog
doc/APIchanges
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bf5f46b4cc47b7a4568119f224057d4ff91b6cdd':
APIChanges: add entry for av_read_packet deprecation
mxfdec: fix typo in mxf_read_seek()
avserver: use freopen to redirect stdin/out/err to /dev/null
avserver: remove daemon mode
configure: Check for -Werror parameters on clang
doxygen: remove obsolete options from Doxyfile
configure: Add option to disable all command line programs
Conflicts:
Changelog
configure
doc/APIchanges
doc/ffserver.conf
doc/ffserver.texi
ffserver.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5ff998a233d759d0de83ea6f95c383d03d25d88e':
flacenc: use uint64_t for bit counts
flacenc: remove wasted trailing 0 bits
lavu: add av_ctz() for trailing zero bit count
flacenc: use a separate buffer for byte-swapping for MD5 checksum on big-endian
fate: aac: Place LATM tests and general AAC tests in different groups
build: The A64 muxer depends on rawenc.o for ff_raw_write_packet()
Conflicts:
doc/APIchanges
libavutil/version.h
tests/fate/aac.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This function does the low-level work of av_opt_set_from_string()
but can be used when there is no option context or when a generic
handling of unknown keys is needed.
av_opt_set_from_string() is changed to make use of it.
They are essential to be able to use the utils without av_malloc()
That is for example use with malloc(), memalign(), some other
private allocation function, on the stack or others.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'add3a6902ea4d459f36655656a1f8daa409118a7':
lavu: bump major to 52
Conflicts:
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2b8dd371e4d276ca0d342e82b8b4cc281be0630a':
lavu: postpone recent deprecations until the next major bump
APIchanges: update lavr bump date
avconv: only apply presets when we have an encoder.
atrac3: replace a calculation with FFALIGN()
atrac3: remove unused ATRAC3Context field, sample_rate
atrac3: use sizeof(variable) instead of sizeof(type)
atrac3: simplify MDCT window calculation
Conflicts:
doc/APIchanges
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In addition to the recent tables mess, the AVOption defaults behavior
changed, so an old lavc used with a new lavu will get completely messed
up defaults.
This commit introduces a new AVPacket side data type:
AV_PKT_DATA_STRINGS_METADATA. Its main goal is to provide a way to
transmit the metadata from the AVFilterBufferRef up to the AVFrame. This
is at the moment "only" useful for lavfi input from libavdevice:
lavd/lavfi only outputs packets, and the metadata from the buffer ref
kept in its context needs to be transmitted from the packet to the frame
by the decoders. The buffer ref can be destroyed at any time (along with
the metadata), and a duplication of the AVPacket needs to duplicate the
metadata as well, so the choice of using the side data to store them was
selected.
Making sure lavd/lavfi raises the metadata is useful to allow tools like
ffprobe to access the filters metadata (it is at the moment the only
way); ffprobe will now automatically show the AVFrame metadata in any
customizable output format for users. API users will also be able to
access the AVFrame->metadata pointer the same way ffprobe does
(av_frame_get_metadata).
All the changes are done in this single commit to avoid some memory
leaks: for instances, the changes in lavfi/avcodec.c are meant to
duplicate the metadata from the buffer ref into the AVFrame. Unless we
have an internal way of freeing the AVFrame->metadata automatically, it
will leak in most of the user apps. To fix this problem, we introduce
AVCodecContext->metadata and link avctx->metadata to the current
frame->metadata and free it at each decode frame call (and in the codec
closing callback for the last one). But doing this also means to update
the way the tiff decoder already handles the AVFrame->metadata (it's the
only one decoder with frame metadata at the moment), by making sure it
is not trying to free a pointer already freed by the lavc internals.
The lavfi/avcodec.c buffer ref code is based on an old Thomas Kühnel
work, the rest of the code belongs to the commit author.
Signed-off-by: Thomas Kühnel <kuehnelth@googlemail.com>
Signed-off-by: Clément Bœsch <ubitux@gmail.com>
* commit 'b7f1010c8fce09096057528f7cd29589ea1ae7df':
tools: do not use av_pix_fmt_descriptors directly.
pixdesc: add functions for accessing pixel format descriptors.
build: add support for Tru64 (OSF/1)
md5: Allocate a normal private context for the opaque md5 context pointer
Conflicts:
cmdutils.c
doc/APIchanges
ffprobe.c
libavformat/md5enc.c
libavutil/version.h
tools/graph2dot.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e002e3291e6dc7953f843abf56fc14f08f238b21':
Use the new aes/md5/sha/tree allocation functions
avutil: Add functions for allocating opaque contexts for algorithms
svq3: fix pointer type warning
svq3: replace unsafe pointer casting with intreadwrite macros
parseutils-test: various cleanups
Conflicts:
doc/APIchanges
libavcodec/svq3.c
libavutil/parseutils.c
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Make av_pix_fmt_descriptors table static on next major bump.
Making the table public is dangerous, since the caller has no way to
know how large it actually is. It also prevents adding new fields to
AVPixFmtDescriptor without a major bump.
The current API where the plain size is exposed is not of much
use - in most cases it is allocated dynamically anyway.
If allocated e.g. on the stack via an uint8_t array, there's no
guarantee that the struct's members are aligned properly (unless
the array is overallocated and the opaque pointer within it
manually aligned to some unspecified alignment).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'b522000e9b2ca36fe5b2751096b9a5f5ed8f87e6':
avio: introduce avio_closep
mpegtsenc: set muxing type notification to verbose
vc1dec: Use correct spelling of "opposite"
a64multienc: change mc_frame_counter to unsigned
arm: call arm-specific rv34dsp init functions under if (ARCH_ARM)
svq1: Drop a bunch of useless parentheses
parseutils-test: do not print numerical error codes
svq1: K&R formatting cosmetics
Conflicts:
doc/APIchanges
libavcodec/svq1dec.c
libavcodec/svq1enc.c
libavformat/version.h
libavutil/parseutils.c
tests/ref/fate/parseutils
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
yuv4mpeg: return proper error codes.
Give all anonymously typedeffed structs in headers a name
fate: Add parseutils test
parseutils-test: Drop random colors from parsing test
vf_pad/scale: use double precision for aspect ratios.
build: error on variable-length arrays
ppc: swscale: rework yuv2planeX_altivec()
ppc: fmtconvert: kill VLA in float_to_int16_interleave_altivec()
x86: dsputil: kill VLA in gmc_mmx()
libspeexenc: Updated commentary to reflect recent changes
libspeexenc: Add an option for enabling DTX
doc/APIchanges: fill in missing dates and hashes.
lavr: bump major to 1 and declare it stable.
lavr: change the type of the data buffers to uint8_t**.
lavc: deprecate the audio resampling API.
Conflicts:
cmdutils.h
configure
doc/APIchanges
ffplay.c
libavcodec/dwt.h
libavcodec/libspeexenc.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavformat/asf.h
tests/fate/libavutil.mak
tests/ref/fate/parseutils
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7751e4693dd10ec98c20fbd9887233b575034272':
ogg: check that the expected number of headers had been parsed
libx264: change default to closed gop to match x264cli
Use avcodec_free_frame() to free AVFrames.
lavf: use a malloced AVFrame in try_decode_frame().
lavc: add avcodec_free_frame().
lavc: ensure extended_data is set properly on decoding
lavc: initialize AVFrame.extended_data in avcodec_get_frame_defaults()
lavc: use av_mallocz to allocate AVFrames.
lavc: rename the argument of avcodec_alloc_frame/get_frame_defaults
Conflicts:
doc/APIchanges
doc/examples/decoding_encoding.c
libavcodec/utils.c
libavcodec/version.h
libavfilter/src_movie.c
libavformat/oggdec.c
libavformat/oggdec.h
libavformat/oggparsetheora.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
