Provide optimized implementation for pix_median_abs8 function.
Performance comparison tests are shown below.
- median_sad_1_c: 277.0
- median_sad_1_neon: 82.0
Benchmarks and tests run with checkasm tool on AWS Graviton 3.
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide optimized implementation for vsad8_intra function.
Performance comparison tests are shown below.
- vsad_5_c: 94.7
- vsad_5_neon: 20.7
Benchmarks and tests run with checkasm tool on AWS Graviton 3.
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide optimized implementation for pix_median_abs16 function.
Performance comparison tests are shown below.
- median_sad_0_c: 720.5
- median_sad_0_neon: 127.2
Benchmarks and tests run with checkasm tool on AWS Graviton 3.
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Reviewed-by: Peter Ross <pross@xvid.org>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Provide optimized implementation for vsse_intra16 for arm64.
Performance tests are shown below.
- vsse_4_c: 155.2
- vsse_4_neon: 36.2
Benchmarks and tests are run with checkasm tool on AWS Graviton 3.
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide optimized implementation for vsad_intra16 function for arm64.
Performance comparison tests are shown below.
- vsad_4_c: 177.5
- vsad_4_neon: 23.5
Benchmarks and tests are run with checkasm tool on AWS Gravtion 3.
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide optimized implementation of vsse16 for arm64.
Performance comparison tests are shown below.
- vsse_0_c: 257.7
- vsse_0_neon: 59.2
Benchmarks and tests are run with checkasm tool on AWS Graviton 3.
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide optimized implementation of vsad16 function for arm64.
Performance comparison tests are shown below.
- vsad_0_c: 285.2
- vsad_0_neon: 39.5
Benchmarks and tests are run with checkasm tool on AWS Graviton 3.
Co-authored-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This has been broken since the start, and it was only discovered
when I started testing my replacement for the FFT.
Disable it, since there's no point in fixing slower code that's about
to be removed anyway.
The vfp version is not affected.
Provide optimized implementation of pix_abs8 function for arm64.
Performance comparison tests are shown below.
- pix_abs_1_0_c: 101.2
- pix_abs_1_0_neon: 22.5
- sad_1_c: 101.2
- sad_1_neon: 22.5
Benchmarks and tests are run with checkasm tool on AWS Graviton 3.
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide optimized implementation of sse8 function for arm64.
Performance comparison tests are shown below.
- sse_1_c: 130.7
- sse_1_neon: 29.7
Benchmarks and tests run with checkasm tool on AWS Graviton 3.
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide optimized implementation of pix_abs16_y2 function for arm64.
Performance comparison tests are shown below.
pix_abs_0_2_c: 317.2
pix_abs_0_2_neon: 37.5
Benchmarks and tests run with checkasm tool on AWS Graviton 3.
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide neon implementation for sse4 function.
Performance comparison tests are shown below.
- sse_2_c: 80.7
- sse_2_neon: 31.0
Benchmarks and tests are run with checkasm tool on AWS Graviton 3.
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide neon implementation for sse16 function.
Performance comparison tests are shown below.
- sse_0_c: 268.2
- sse_0_neon: 43.5
Benchmarks and tests run with checkasm tool on AWS Graviton 3.
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
The max height is currently documented as 16; the max difference per
pixel is 255, and a .8h element can easily contain 16*255, thus keep
accumulating in two .8h vectors, and just do the final accumulationat the
end. This should work for heights up to 256.
This requires a minor register renumbering in ff_pix_abs16_xy2_neon.
Before: Cortex A53 A72 A73 Graviton 3
pix_abs_0_0_neon: 97.7 47.0 37.5 22.7
pix_abs_0_1_neon: 154.0 59.0 52.0 25.0
pix_abs_0_3_neon: 179.7 96.7 87.5 41.2
After:
pix_abs_0_0_neon: 96.0 39.2 31.2 22.0
pix_abs_0_1_neon: 150.7 59.7 46.2 23.7
pix_abs_0_3_neon: 175.7 83.7 81.7 38.2
Signed-off-by: Martin Storsjö <martin@martin.st>
Using absolute-difference-accumulate does use twice the amount of
absolute-difference instructions, but avoids the need for the
uaddl and add instructions, reducing the total number of instructions
by 3.
These can be interleaved in the rest of the calculation, to avoid
tight dependencies at the end. Unfortunately, this is marginally
slower on Cortex A53, but faster on A72 and A73.
Before: Cortex A53 A72 A73 Graviton 3
pix_abs_0_3_neon: 175.7 109.2 92.0 41.2
After:
pix_abs_0_3_neon: 179.7 96.7 87.5 41.2
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide neon implementation for pix_abs16_x2 function.
Performance tests of implementation are below.
- pix_abs_0_1_c: 283.5
- pix_abs_0_1_neon: 39.0
Benchmarks and tests run with checkasm tool on AWS Graviton 3.
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
- ff_pix_abs16_neon
- ff_pix_abs16_xy2_neon
In direct micro benchmarks of these ff functions verses their C implementations,
these functions performed as follows on AWS Graviton 3.
ff_pix_abs16_neon:
pix_abs_0_0_c: 141.1
pix_abs_0_0_neon: 19.6
ff_pix_abs16_xy2_neon:
pix_abs_0_3_c: 269.1
pix_abs_0_3_neon: 39.3
Tested with:
./tests/checkasm/checkasm --test=motion --bench --disable-linux-perf
Signed-off-by: Jonathan Swinney <jswinney@amazon.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
The SAO band filter can be called with non-multiples of 8, we round up
to the nearest multiple of 8 to account for this.
Signed-off-by: J. Dekker <jdek@itanimul.li>
This patch fixes a wrong type of BTI landing pad when branching to
functions instantiated via the fft*_neon macro.
Although the previously employed paciasp instruction serves as a landing
pad, for the ways that this function is invoked it is the wrong type, resulting
in an unexpected termination of the running process.
Signed-off-by: André Kempe <andre.kempe@arm.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
checkasm benchmarks on 1.5 GHz Cortex-A72 are as follows.
vc1dsp.vc1_unescape_buffer_c: 655617.7
vc1dsp.vc1_unescape_buffer_neon: 118237.0
Signed-off-by: Ben Avison <bavison@riscosopen.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
checkasm benchmarks on 1.5 GHz Cortex-A72 are as follows. Note that the C
version can still outperform the NEON version in specific cases. The balance
between different code paths is stream-dependent, but in practice the best
case happens about 5% of the time, the worst case happens about 40% of the
time, and the complexity of the remaining cases fall somewhere in between.
Therefore, taking the average of the best and worst case timings is
probably a conservative estimate of the degree by which the NEON code
improves performance.
vc1dsp.vc1_h_loop_filter4_bestcase_c: 10.7
vc1dsp.vc1_h_loop_filter4_bestcase_neon: 43.5
vc1dsp.vc1_h_loop_filter4_worstcase_c: 184.5
vc1dsp.vc1_h_loop_filter4_worstcase_neon: 73.7
vc1dsp.vc1_h_loop_filter8_bestcase_c: 31.2
vc1dsp.vc1_h_loop_filter8_bestcase_neon: 62.2
vc1dsp.vc1_h_loop_filter8_worstcase_c: 358.2
vc1dsp.vc1_h_loop_filter8_worstcase_neon: 88.2
vc1dsp.vc1_h_loop_filter16_bestcase_c: 51.0
vc1dsp.vc1_h_loop_filter16_bestcase_neon: 107.7
vc1dsp.vc1_h_loop_filter16_worstcase_c: 722.7
vc1dsp.vc1_h_loop_filter16_worstcase_neon: 140.5
vc1dsp.vc1_v_loop_filter4_bestcase_c: 9.7
vc1dsp.vc1_v_loop_filter4_bestcase_neon: 43.0
vc1dsp.vc1_v_loop_filter4_worstcase_c: 178.7
vc1dsp.vc1_v_loop_filter4_worstcase_neon: 69.0
vc1dsp.vc1_v_loop_filter8_bestcase_c: 30.2
vc1dsp.vc1_v_loop_filter8_bestcase_neon: 50.7
vc1dsp.vc1_v_loop_filter8_worstcase_c: 353.0
vc1dsp.vc1_v_loop_filter8_worstcase_neon: 69.2
vc1dsp.vc1_v_loop_filter16_bestcase_c: 60.0
vc1dsp.vc1_v_loop_filter16_bestcase_neon: 90.0
vc1dsp.vc1_v_loop_filter16_worstcase_c: 714.2
vc1dsp.vc1_v_loop_filter16_worstcase_neon: 97.2
Signed-off-by: Ben Avison <bavison@riscosopen.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids unnecessary rebuilds of most source files if only the
list of enabled components has changed, but not the other properties
of the build, set in config.h.
Signed-off-by: Martin Storsjö <martin@martin.st>
This patch adds optional support for Arm Pointer Authentication Codes.
PAC support is turned on or off at compile time using additional
compiler flags. Unless any of these is enabled explicitly, no additional
code will be emitted at all.
Signed-off-by: André Kempe <andre.kempe@arm.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
While this function on its own passes all of fate-hevc, there's
indications that the function might need to handle widths that
aren't a multiple of 8 (noted in commit
f63f9be37c, which later was
reverted).
Signed-off-by: Martin Storsjö <martin@martin.st>
