avutil_version() currently performs several checks before
just returning the version. There is a static int that aims
to ensure that these tests are run only once. The reason is that
there used to be a slightly expensive check, but it has been removed
in 92e3a6fdac. Today running only
once is unnecessary and can be counterproductive: GCC 10 optimizes
all the actual checks away, but the checks_done variable and the code
setting it has been kept. Given that this check is inherently racy
(it uses non-atomic variables), it is best to just remove it.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The new format (given in big/little endian forms) matches the
existing X2RGB10 format, except with B and R channels switched.
AV_PIX_FMT_X2BGR10 data often is created by OpenGL programs
whose buffers use the GL_RGB10 internal format.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Command below failed.
ffmpeg -v verbose -init_hw_device vaapi=va:/dev/dri/renderD128
-init_hw_device qsv=qs@va -hwaccel qsv -hwaccel_device qs
-filter_hw_device va -c:v h264_qsv
-i 1080P.264 -vf "hwmap,format=vaapi" -c:v h264_vaapi output.264
Cause: Assign pair->first directly to data[3] in vaapi frame.
pair->first is *VASurfaceID while data[3] in vaapi frame is
VASurfaceID. I fix this line of code. Now the command above works.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
It does the same as av_calloc(), so one of them should be removed.
Given that av_calloc() has the shorter name, it is retained.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Do this by putting an AVBuffer structure into BufferPoolEntry and
reuse it for all subsequent uses of said BufferPoolEntry.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Microsoft VideoProcessor requires texture with D3DUSAGE_RENDERTARGET flag as output.
There is no way to allocate array of textures with D3D11_BIND_RENDER_TARGET flag
and .ArraySize > 2 by ID3D11Device_CreateTexture2D due to the Microsoft limitation.
Adding AVD3D11FrameDescriptors array to store array of single textures
instead of texture with multiple slices resolves this.
Signed-off-by: Artem Galin <artem.galin@intel.com>
UPD: Rebase of last patch set over current master and use DX9 as default device type.
Makes selection of dxva2/DX9 device type by default as before with explicit d3d11va/DX11 usage to cover more HW configurations.
Added warning message to expect changing default device type in the future.
Fixes TGL / AV1 decode as requires DX11 with explicit DX11 type
selection.
Add headless/multi adapter support and fixes:
https://trac.ffmpeg.org/ticket/7511https://trac.ffmpeg.org/ticket/6827http://ffmpeg.org/pipermail/ffmpeg-trac/2017-November/041901.htmlhttps://trac.ffmpeg.org/ticket/7933338fbcd5bbhttps://github.com/jellyfin/jellyfin/issues/2626#issuecomment-602153952
Any other fixes are welcome including OpenCL interop patch since I don't have proper setup to validate this use case
Decoding, encoding, transcoding have been validated.
child_device_type option is responsible for d3d11va/dxva2 device selection
Usage examples:
DirectX 11:
-init_hw_device qsv:hw,child_device_type=d3d11va
-init_hw_device qsv:hw,child_device_type=d3d11va,child_device=0
OR
-init_hw_device d3d11va=dx -init_hw_device qsv@dx
DirectX 9 is still supported but requires explicit selection:
-init_hw_device qsv:hw,child_device_type=dxva2
OR
-init_hw_device dxva2=dx -init_hw_device qsv@dx
Signed-off-by: Artem Galin <artem.galin@intel.com>
This enables usage of non-powered/headless GPU, better HDR support.
Pool of resources is allocated as one texture with array of slices.
Signed-off-by: Artem Galin <artem.galin@intel.com>
EINVAL is the wrong error code here, since the arguments passed to the
function are valid. The error is that the function is not implemented in
the build, which corresponds to ENOSYS.
From SMPTE RDD 5-2006, the grain seed is to be computed from the
following definition of `pic_offset`:
> When decoding H.264 | MPEG-4 AVC bitstreams, pic_offset is defined as
> follows:
> - pic_offset = PicOrderCnt(CurrPic) + (PicOrderCnt_offset << 5)
> where:
> - PicOrderCnt(CurrPic) is the picture order count of the current frame,
> which shall be derived from [the video stream].
>
> - PicOrderCnt_offset is set to idr_pic_id on IDR frames. idr_pic_id
> shall be read from the slice header of [the video stream]. On non-IDR I
> frames, PicOrderCnt_offset is set to 0. A frame shall be classified as I
> frame when all its slices are I slices, which may be optionally
> designated by setting primary_pic_type to 0 in the access delimiter NAL
> unit. Otherwise, PicOrderCnt_offset it not changed. PicOrderCnt_offset is
> updated in decoding order.
Co-authored-by: James Almer <jamrial@gmail.com>
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: James Almer <jamrial@gmail.com>
In particular, document that av_opt_copy() always disentangles
allocated options even on error; this guarantee is needed to e.g.
properly free duplicated thread contexts in libavcodec on error.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The reason why the generic av_image_copy_uc_from() doesn't really
fit in the case for Vulkan is because some planes may be copied via
other methods (such as mapping GPU memory), and if they don't satisfy
the strict alignment requirements, a gpu image->gpu buffer->cpu ram
copy is performed.
We need this for hwcontext_vulkan, and I think this will also be
useful to API users like libplacebo who would rather not write
a custom SIMD memcpy.
Since 580e168a94, av_size_mult() is no
longer inlined; on systems where interposing is a thing, this also
inhibits the compiler from inlining said function into the internal
callers of said function, although inlining such a small function is
typically beneficial: With GCC 10.3 on Ubuntu x64 and -O3 this decreases
the size of av_realloc_array from 91B to 23B, from 129B to 81B for
av_realloc_f and from 77B to 23B for each of av_malloc_array,
av_mallocz_array and av_calloc.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is also used by libavfilter and it is only natural to define it
alongside ff_dlog().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, including error.h alone does not make the AVERROR_* defines
usable, because they just expand to something involving MKTAG, but
without the header providing MKTAG. So include macros.h, the header
providing MKTAG.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
common.h currently contains several things: Math macros, UTF-8 macros,
other fundamental macros; furthermore it also contains miscellaneous
math functions and it (directly and indirectly) includes lots of other
headers.
This commit moves the "other fundamental macros" to macros.h which is
a more fitting place.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Some function had exceed 30 inline assembly register oprands limiation
when using LOONGSON2 version of MMI macros. We can avoid that by take
$at, which is register reserved for assembler, as temporary register.
As none of instructions used in these macros is pseudo, it is safe to
utilize $at here.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
{SAVE,RECOVER}_REG will be available for Loongson2 again,
also comment about the magic.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
These have mostly been added because of FF_API_*; yet when these were
removed, removing the header has been forgotten.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These inclusions are not necessary, as cpu.h is already included
wherever it is needed (via direct inclusion or via the arch-specific
headers).
Also remove other unnecessary cpu.h inclusions from ordinary
non-headers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is not used here at all; instead, add it where it is used without
including it or any of the arch-specific CPU headers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Teach AV_HWDEVICE_TYPE_VIDEOTOOLBOX to be able to create AVFrames of type
AV_PIX_FMT_VIDEOTOOLBOX. This can be used to hwupload a regular AVFrame
into its CVPixelBuffer equivalent.
ffmpeg -init_hw_device videotoolbox -f lavfi -i color=black:640x480 -vf hwupload -c:v h264_videotoolbox -f null -y /dev/null
Signed-off-by: Aman Karmani <aman@tmm1.net>
The field is a standard field, yet we were loading it as if it was
a quadword. This worked for forward transforms by chance, but broke
when the transform was inverse.
checkasm couldn't catch that because we only test forward transforms,
which are identical to inverse transforms but with a different revtab.
Fixes: left shift of negative value -1
Fixes: 33736/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_SIREN_fuzzer-6657785795313664
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
