Up until now, the Sega FILM muxer would store some information about
each packet in a linked list. When writing the trailer, the information
in said linked list would be used to write a table in the file header.
Each entry in said table is 16 bytes long, but each entry of the linked
list is 32 bytes long (assuming 64 bit pointer and no padding).
Therefore it makes sense to remove the linked list and write the array
entries directly into a dynamic buffer while writing the packet (this is
possible because the table entries don't depend on any information not
available when writing the packet (the offset is not relative to the
beginning of the file, but to the end of the table). This also
simplifies writing the array at the end (there is no need to traverse a
linked list).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Mostly using intermediate pointers for accesses (i.e. storing s->pb in a
variable pb and then using pb for writing instead of s->pb) to improve
readability. Furthermore, the opening brace '{' of a function has been
moved into a line of its own in instances where it wasn't before.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Also return proper error codes when it is absent: AVERROR(EINVAL)
instead of AVERROR_INVALIDDATA.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When using the WebM DASH Manifest muxer, every stream of each adaptation
set has to contain a metadata entry containing the filename of the
source file. In case of live stream manifests, said filename has to
conform to a pattern of
<file_description>_<representation_id>.<extension>. These pieces are
used to create the other strings that are actually output. Up until now,
these other strings would be allocated, used once and then freed
directly after usage. This commit changes this: The function that
allocated and assembled these strings now returns pointers to the '_'
and '.' delimiters and so that the caller can easily pick substrings
from it without needing to copy the string.
Avoiding allocations also fixes a memleak: One of the allocated strings
would leak upon a subsequent allocation failure.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
In 1ec2b3de5a, the extradata size was affected when the raster was
signaled as flipped due to user-set option rather than via extradata.
This resulted in a wrong header size being written. Fixed.
The codeblock decoder checks whether the mqc decoder
has decoded the right number of bytes. However, this
check does not account for the fact that the mqc encoder's
flush routine adds 2 bytes of data which does not have to be
read by the decoder. The check is modified to account for
this. This patch solves issue #4827
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Later the decorrelate_stereo call is guarded by channels == 2
and non-zero decorr_left_weight. Make sure decorr_shift is in
the expected shift range for that case.
Fixes: shift exponent 128 is too large for 32-bit type 'int'
Fixes: 23860/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ALAC_fuzzer-5751138914402304
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The Matroska demuxer currently always opens a GetByteContext to read the
content of the projection's private data buffer; it does this even if
there is no private data buffer in which case opening the GetByteContext
will lead to a NULL + 0 which is undefined behaviour.
Furthermore, in this case the code relied both on the implicit checks
of the bytestream2 API as well as on the fact that it returns zero
if there is not enough data available.
Both of these issues have been addressed by not using the bytestream API
any more; instead the data is simply read directly by using AV_RB. This
is possible because the offsets are constants.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When parsing MXF encountering some tags leads to allocations. And when
these tags were encountered repeatedly, this could lead to memleaks,
because the pointer to the old data got simply overwritten with a
pointer to the new data (or to NULL on allocation failure). This has
been fixed.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The MXF demuxer uses an array of pointers to different structures of
metadata (all containing a common initial sequence containing a type
field to distinguish them) and some of these structures contain pointers
to separately allocated subelements. If an error happens while reading
and creating the tags, the semi-finished new tag is freed using the
function to free these tags. But this function doesn't free the already
allocated subelements, because the type has not been set yet. This commit
changes this.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Said array contains pointers to other structs and both the designated
new element as well as other stuff contained in it (e.g. strings) leak
if the new element can't be added to the array.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
GCC complains:
warning: listing the stack pointer register ‘$29’ in a clobber
list is deprecated [-Wdeprecated]
Actually stack pointer was restored at the end of the inline assembly
so there is no reason to add it to the clobber list.
Also use $sp insted of $29 to make our intention much more clear.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Apply optimized functions according to cpuflags.
MSA is usually put after MMI as it's generally faster than MMI.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Add MMI & MSA runtime detection for MIPS.
Basically there are two code pathes. For systems that
natively support CPUCFG instruction or kernel emulated
that instruction, we'll sense this feature from HWCAP and
report the flags according to values grab from CPUCFG. For
systems that have no CPUCFG (or not export it in HWCAP),
we'll parse /proc/cpuinfo instead.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
That helper grab from kernel code can allow us to inline
newer instructions (not implemented by the assembler) in
a elegant manner.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
To enable runtime detection for MIPS, we need to refine ffbuild
part to support buildding these feature together.
Firstly, we fixed configure, let it probe native ability of toolchain
to decide wether a feature can to be enabled, also clearly marked
the conflictions between loongson2 & loongson3 and Release 6 & rest.
Secondly, we compile MMI and MSA C sources with their own flags to ensure
their flags won't pollute the whole program and generate illegal code.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This uses av_image_fill_plane_sizes instead of av_image_fill_pointers
when we are getting plane sizes to avoid UB from adding offsets to NULL.
Signed-off-by: Brian Kim <bkkim@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This uses av_image_fill_plane_sizes instead of av_image_fill_pointers
when we are getting plane sizes to avoid UB from adding offsets to NULL.
Signed-off-by: Brian Kim <bkkim@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This utility helps avoid undefined behavior when doing things like
checking how much memory we need to allocate for an image before we have
allocated a buffer.
Signed-off-by: Brian Kim <bkkim@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
similar to:
36e51c190b avcodec/libaomenc: use pix_fmt descriptors where useful
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: James Zern <jzern@google.com>
Fixes: out of array access
Fixes: crash.asf
Found-by: anton listov <greyfarn7@yandex.ru>
Reviewed-by: anton listov <greyfarn7@yandex.ru>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 33986707200000000 + 9195561788997000192 cannot be represented in type 'long'
Fixes: 23790/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-6554232198266880
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
lzwenc stores a function pointer to either put_bits or put_bits_le;
however, after the recent change, the function pointer's prototype
would depend on BitBuf. BitBuf is defined in put_bits.h, whose
definition depends on whether BITSTREAM_WRITER_LE is #defined or not.
For safety, we set a boolean flag for little/big endian instead,
which also allows the definition to be inlined.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
