av_new_packet() already sets the size. And if the packet is not
allocated by av_new_packet() (which seems to be impossible atm), both
pkt->size as well as size are 0, so setting it again is unnecessary in
this scenario, too.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The comment referred to the INIT_VLC_USE_STATIC flag which has been
removed in 2009 in 595324e143b57a52e2329eb47b84395c70f93087; the
function it referred to was removed even earlier in commit
83422c1940 in 2008.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
In ticket #8754 there is discourse surrounding the error
message which is printed upon a mismatched aspect ratio in
derived encodings. This should make it clearer to the user
as to the issues which they are experiencing.
Reviewed-by: "Jeyapal, Karthick" <kjeyapal@akamai.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The V4L2 driver does not actually have an associated DRM device at all, so
users work around the requirement by giving libva an unrelated display-only
device instead (which is fine, because it doesn't actually do anything with
that device). This was broken by bc9b6358fb
forcing a render node, because the display-only device did not have an
associated render node to use. Fix that by just passing through the
original non-render DRM fd if we can't find a render node.
Reported-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Tested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This avoids keeping potentially dangling pointers in the context,
beautifies the code (by replacing "&ri->gb" by gb for every access to
the GetByteContext) and also highlights the GetByteContext's short-lived
nature better.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The implementation of the tag tree did not
set the correct reset value for the encoder.
This lead to inefficent tag tree being encoded.
This patch fixes the implementation of the
ff_tag_tree_zero() function.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch allows setting a compression ratio and to
set multiple layers. The user has to input a compression
ratio for each layer.
The per layer compression ration can be set as follows:
-layer_rates "r1,r2,...rn"
for to create 'n' layers.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The implementation of tag tree encoding was incorrect.
However, this error was not visible as the current j2k
encoder encodes only 1 layer.
This patch fixes tag tree coding for JPEG2000 such tag
tree coding would work for multi layer encoding.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch makes the tag_tree_zero() and tag_tree_size()
functions non static and callable from other files.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array access
Fixes: 24823/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_CFHD_fuzzer-4855119863349248
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes issue reported by: Xu Guangxin <guangxin.xu@intel.com>
Original report:
Steps to reproduce:
1. ./configure --enable-debug=3 --disable-libx264 && make install
2. ffmpeg -i input.mp4 -profile:v baseline output.mp4 -y
you will see a crash like this:
[mpeg4 @ 0x5555575854c0] [Eval @ 0x7fffffffbf80] Undefined constant or missing '(' in 'baseline'
[mpeg4 @ 0x5555575854c0] Unable to parse option value "baseline"
[mpeg4 @ 0x5555575854c0] Error setting option profile to value baseline.
Thread 1 "ffmpeg" received signal SIGSEGV, Segmentation fault.
root cause:
If the codec has FF_CODEC_CAP_INIT_CLEANUP flag, and avcodec_open2 got an error before avctx->codec->init,
the ff_mpv_encode_end will face a null s->avctx.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Here it even leads to the complete removal of the context.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Winnov WNV1 format is designed for a little-endian bitstream reader;
yet our decoder reversed every byte bitwise (in a buffer only
allocated for this purpose) to use a big-endian bitstream reader. This
commit stops this.
Two things needed to be done to achieve this: The codes in the table used
to initialize a VLC reader needed to be reversed bitwise (when
initializing a VLC in LE mode, it is expected that the first bit to be
read is in the least significant bit; with BE codes the first bit to be
read is the most significant bit of the code) and the following
expression needed to be adapted:
ff_reverse[get_bits(&w->gb, 8 - w->shift)]
But this is easy: When only the bits read are reversed, they coincide
with what a little-endian bitstream reader reads that reads the
original, not-reversed data. But ff_reverse always reverses the full
eight bits and this also performs a shift by (8 - (8 - w->shift)) on top
of reversing the bits read. So the above line needs to be changed to
get_bits(&w->gb, 8 - w->shift) << w->shift
and this also shows why the variable shift is named the way it is.
Finally, this also fixes a hypothetical memleak: For gigantic packets,
initializing a GetBitContext can fail and in this case, the buffer
containing the reversed data would leak.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The frame will only be allocated a few lines below.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
TrueMotion 2.0 uses Huffmann trees. To parse them, the decoder allocates
arrays for the codes, their lengths and their value; afterwards a VLC
table is initialized using these values. If everything up to this point
succeeds, a new buffer of the same size as the already allocated arrays
for the values is allocated and upon success the values are copied into
the new array; all the old arrays are then freed. Yet if allocating the
new array fails, the old arrays get freed, but the VLC table doesn't.
This leak is fixed by not allocating a new array at all; instead the old
array is simply reused, ensuring that nothing can fail after the
creation of the VLC table.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
MXF CDCI color range was being set to (1<<sc->component_depth) - 1
for full range but it should be (1<<sc->component_depth) as 0 is
a valid value.
Signed-off-by: Harry Mallon <harry.mallon@codex.online>
if taken from stack, they may have garbage in the upper bits otherwise.
Also, there are only 8 arguments, so don't attempt to load 11.
Fixes SIGSEV crashes in some targets.
Reviewed-by: durandal_1707
Signed-off-by: James Almer <jamrial@gmail.com>
A few popular sites have started generating MP4 files which have a
sidx plus an mfra. The sidx accounts for all size except the mfra,
so the old code did not mark the fragment index as complete.
Instead we can just check if there's an mfra and if its size makes
up the difference we can mark the index as complete.
Bug: https://crbug.com/1107130
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
