The size-32 DCT_II has a special implementation which doesn't use
the normal tables. Skipping allocation of these in this case saves
some memory.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Ignore color_type information for setting the monoblack pixel format,
only rely on bit_depth.
In particular: fix Test_1bpp_grayscale.png from issue #172.
This may work fine for some broken encoder, and not for others.
* qatar/master:
aacdec: Use float instead of int16_t for ltp_state to avoid needless rounding.
acelp: Remove unused gray_decode table.
dfa: Remove unused variable.
configure: Include AVX availability in summary output.
configure: use same CPPFLAGS in kFreeBSD as Linux
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Surround memset and ff_vp8_dct_cat_prob by X() in order to fix iOS build
Includes patch by Luca Barbato <lu_zero@gentoo.org>.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* qatar/master:
swscale: properly inline bits/endianness in yuv2yuvX16inC().
(We didnt pull the bug) swscale: fix clipping of 9/10bit YUV420P.
Add av_clip_uintp2() function
(our patch / duplicate) dfa: fix buffer overflow checks to avoid integer overflows.
(our patch / duplicate) movenc: always write esds descriptor length using 4 bytes.
(our patch / duplicate) ffmpeg: use parse_number_and_die() when it makes sense
(No thanks) ffmpeg: get rid of the 'q' key schizofrenia
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (33 commits)
rtpdec_qdm2: Don't try to parse data packet if no configuration is received
ac3enc: put the counting of stereo rematrixing bits in the same place to make the code easier to understand.
ac3enc: clean up count_frame_bits() and count_frame_bits_fixed()
mpegvideo: make FF_DEBUG_DCT_COEFF output coeffs via av_log() instead of just via AVFrame.
srtdec: make sure we don't write past the end of buffer
wmaenc: improve channel count and bitrate error handling in encode_init()
matroskaenc: make sure we don't produce invalid file with no codec ID
matroskadec: check that pointers were initialized before accessing them
lavf: fix function name in compute_pkt_fields2 av_dlog message
lavf: fix av_find_best_stream when providing a wanted stream.
lavf: fix av_find_best_stream when decoder_ret is given and using a related stream.
ffmpeg: factorize quality calculation
tiff: add support for SamplesPerPixel tag in tiff_decode_tag()
tiff: Prefer enum TiffCompr over int for TiffContext.compr.
mov: Support edit list atom version 1.
configure: Enable libpostproc automatically if GPL code is enabled.
Cosmetics: fix prototypes in oggdec
oggdec: fix memleak with continuous streams.
matroskaenc: add missing new line in av_log() call
dnxhdenc: add AVClass in private context.
...
swscale changes largely rewritten by me or replaced by baptsites due to lots of bugs in ronalds code.
Above code is also just in case its not obvios to a large extended duplicates that where cherry picked
from ffmpeg.
Conflicts:
configure
ffmpeg.c
libavformat/matroskaenc.c
libavutil/pixfmt.h
libswscale/ppc/swscale_template.c
libswscale/swscale.c
libswscale/swscale_template.c
libswscale/utils.c
libswscale/x86/swscale_template.c
tests/fate/h264.mak
tests/ref/lavfi/pixdesc_le
tests/ref/lavfi/pixfmts_copy_le
tests/ref/lavfi/pixfmts_null_le
tests/ref/lavfi/pixfmts_scale_le
tests/ref/lavfi/pixfmts_vflip_le
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows the values to be used without changing C code and is closer to how
the other DEBUG flags work.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Format detection and internal frame initialization is moved to a
separate init_image() function, which is called when all the tags have
been read, and so both BitsPerSample and SamplesPerPixel information
has been collected.
This fixes decoding of the file 11.tiff from roundup issue #1925.
Based on a patch by Kostya Shishkov <kostya.shishkov@gmail.com>.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
int/unsigned is the natural memory access type for CPUs, using sized types
for temporary variables, counters and similar just increases code size and
can possibly cause a slowdown.
Adding _POSIX_C_SOURCE to CPPFLAGS globally produces all sorts of problems
since it causes certain system functions to be hidden on some (BSD) systems.
The solution is to only add the flag on systems that really require it, i.e.
glibc-based ones.
This change makes BSD systems compile out-of-the-box without the need for
adding specific flags manually. It also allows dropping a number of flags
set manually on a file-per-file basis, but were only present to work around
breakage introduced by the presence of _POSIX_C_SOURCE.
Also add _XOPEN_SOURCE to CPPFLAGS for glibc systems. We use XSI extensions
in several places already, so it is preferable to define it globally instead
of littering source files with individual #defines only needed for glibc.
* qatar/master: (32 commits)
10-bit H.264 x86 chroma v loopfilter asm
Port SMPTE S302M audio decoder from FFmbc 0.3. [Copyright headers corrected]
Fix crash of interlaced MPEG2 decoding
h264pred: fix one more aliasing violation.
doc/APIchanges: fill in missing hashes and dates.
flacenc: use proper initializers for AVOption default values.
lavc: deprecate named constants for deprecated antialias_algo.
aac: workaround for compilation on cygwin
swscale: extend YUV422p support to 10bits depth
tiff: add support for inverted FillOrder for uncompressed data
Remove unused softfloat implementation.
h264pred: fix aliasing violations.
rotozoom: Eliminate French variable name.
rotozoom: Check return value of fread().
rotozoom: Return an error value instead of calling exit().
rotozoom: Make init_demo() return int and check for errors on invocation.
rotozoom: Drop silly UINT8 typedef.
rotozoom: Drop some unnecessary parentheses.
rotozoom: K&R coding style cosmetics
rtsp: Only do keepalive using GET_PARAMETER if the server supports it
...
Conflicts:
Changelog
cmdutils.c
doc/APIchanges
doc/general.texi
ffmpeg.c
ffplay.c
libavcodec/h264pred_template.c
libavcodec/resample.c
libavutil/pixfmt.h
libavutil/softfloat.c
libavutil/softfloat.h
tests/rotozoom.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The QuickTime RLE encoder only supports 16, 24, and 32-bit color. This patch adds support
for 8-bit grayscale.
Signed-off-by: John Horigan <john@glyphic.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
On cygwin, math.h needs to be included before float.h because of a bug
in the system headers. Including libavutil/libm.h first works around
this issue.
Longer discussion of the topic:
http://thread.gmane.org/gmane.comp.video.ffmpeg.devel/128582
* qatar/master: (30 commits)
AVOptions: make default_val a union, as proposed in AVOption2.
arm/h264pred: add missing argument type.
h264dsp_mmx: place bracket outside #if/#endif block.
lavf/utils: fix ff_interleave_compare_dts corner case.
fate: add 10-bit H264 tests.
h264: do not print "too many references" warning for intra-only.
Enable decoding of high bit depth h264.
Adds 8-, 9- and 10-bit versions of some of the functions used by the h264 decoder.
Add support for higher QP values in h264.
Add the notion of pixel size in h264 related functions.
Make the h264 loop filter bit depth aware.
Template dsputil_template.c with respect to pixel size, etc.
Template h264idct_template.c with respect to pixel size, etc.
Preparatory patch for high bit depth h264 decoding support.
Move some functions in dsputil.c into a new file dsputil_template.c.
Move the functions in h264idct into a new file h264idct_template.c.
Move the functions in h264pred.c into a new file h264pred_template.c.
Preparatory patch for high bit depth h264 decoding support.
Add pixel formats for 9- and 10-bit yuv420p.
Choose h264 chroma dc dequant function dynamically.
...
Conflicts:
doc/APIchanges
ffmpeg.c
ffplay.c
libavcodec/alpha/dsputil_alpha.c
libavcodec/arm/dsputil_init_arm.c
libavcodec/arm/dsputil_init_armv6.c
libavcodec/arm/dsputil_init_neon.c
libavcodec/arm/dsputil_iwmmxt.c
libavcodec/arm/h264pred_init_arm.c
libavcodec/bfin/dsputil_bfin.c
libavcodec/dsputil.c
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
libavcodec/h264_loopfilter.c
libavcodec/h264_ps.c
libavcodec/h264_refs.c
libavcodec/h264dsp.c
libavcodec/h264idct.c
libavcodec/h264pred.c
libavcodec/mlib/dsputil_mlib.c
libavcodec/options.c
libavcodec/ppc/dsputil_altivec.c
libavcodec/ppc/dsputil_ppc.c
libavcodec/ppc/h264_altivec.c
libavcodec/ps2/dsputil_mmi.c
libavcodec/sh4/dsputil_align.c
libavcodec/sh4/dsputil_sh4.c
libavcodec/sparc/dsputil_vis.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/dsputil_mmx.c
libavformat/options.c
libavformat/utils.c
libavutil/pixfmt.h
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/swscale_template.c
tests/ref/seek/lavf_avi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Looks better for some cases, worse for others, overall not much difference.
Its more correct though.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Just some cosmetics & comments, the only functional change
"error_resilience: use s->last_picture for accessing last MVs."
Is so buggy that it needs a full rewrite, guess -1.0 PSNR loss wasnt
enough for ronald to realize there was a problem.
This patch lets e.g. dsputil_init chose dsp functions with respect to
the bit depth to decode. The naming scheme of bit depth dependent
functions is <base name>_<bit depth>[_<prefix>] (i.e. the old
clear_blocks_c is now named clear_blocks_8_c).
Note: Some of the functions for high bit depth is not dependent on the
bit depth, but only on the pixel size. This leaves some room for
optimizing binary size.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
In high bit depth, the QP values may now be up to (51 + 6*(bit_depth-8)).
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
In high bit depth the pixels will not be stored in uint8_t like in the
normal case, but in uint16_t. The pixel size is thus 1 in normal bit
depth and 2 in high bit depth.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The functions moved are used when decoding h264.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
mpegaudiodec: group #includes more sanely
mpegaudio: remove #if 0 blocks
ffmpeg.c: reset avoptions after each input/output file.
ffmpeg.c: store per-output stream sws flags.
mpegaudio: remove CONFIG_MPEGAUDIO_HP option
mpegtsenc: Clear st->priv_data when freeing it
udp: Fix receiving RTP data over multicast
rtpproto: Remove an unused variable
regtest: fix wma tests
NOT pulled: mpegaudio: remove CONFIG_AUDIO_NONSHORT
regtest: separate flags for encoding and decoding
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The low quality mode is off by default and never tested. The high
quality mode is also plenty fast enough.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This fake option cannot be enabled by normal means, and the
floating-point decoder should provide the higher quality this
option presumably was intended for.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
log: Fix an oob array read.
cosmetics: trim trailing whitespace in postproc
Ban strncpy() it's too easy to misuse.
psymodel: Remove wrapper functions.
aacenc: Replace loop counters in aac_encode_frame() with more descriptive 'ch' and 'w'.
regtest: remove redundant flags in jpg test
regtest: use run_ffmpeg in do_image_formats
regtest: simplify encoding functions
ffmpeg.c: check for interlaced flag in the correct place.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When the file to decode contains a sequence of binary values like
"1101110...", decode_frame() was reading the sequence of digits like a
unique integer value, which was resulting in integer overflows.
The change add support for parsing non-space-separated pixel digits
for mono formats, in particular fix decoding of file battrace.pbm, and
fix trac issue #154.
All decode_channel_map calls together can easily read
more data than the amount of padding available.
Thus below patch adds an input length check before reading them.
Fixes some invalid reads with sample from
http://bugzilla.mplayerhq.hu/show_bug.cgi?id=1138
This is required specifically for setting frame->format to -1,
otherwise it will be set to 0 = PIX_FMT_YUV420P and code reading
the format from the output decoded frame will get misled.
In particular fix regressions occurring with the pending vsrc_buffer
patch.
The format is a per-frame property, having it in AVFrame simplify the
operation of extraction of that information, since avoids the need to
access the codec/stream context.
width and height are per-frame properties, setting these values in
AVFrame simplify the operation of extraction of that information,
since avoids the need to check the codec/stream context.
* qatar/master: (23 commits)
doc: Check standalone compilation before submitting new components.
Fix standalone compilation of pipe protocol.
Fix standalone compilation of ac3_fixed encoder.
Fix standalone compilation of binkaudio_dct / binkaudio_rdft decoders.
Fix standalone compilation of IMC decoder.
Fix standalone compilation of WTV demuxer.
Fix standalone compilation of MXPEG decoder.
flashsv: K&R cosmetics
matroskaenc: fix memory leak
vc1: make overlap filter for I-frames bit-exact.
vc1dec: use s->start/end_mb_y instead of passing them as function args.
Revert "VC1: merge idct8x8, coeff adjustments and put_pixels."
Replace strncpy() with av_strlcpy().
indeo3: Eliminate use of long.
get_bits: make cache unsigned to eliminate undefined signed overflow.
asfdec: fix assert failure on invalid files
avfilter: check malloc return values.
Not pulled as reason for reindent is not pulled: mpegvideo: reindent.
nutenc: check malloc return values.
Not pulled due to much simpler solution in ffmpeg *: don't av_malloc(0).
...
Conflicts:
doc/developer.texi
libavcodec/Makefile
libavcodec/get_bits.h
libavcodec/mpegvideo.c
libavformat/Makefile
libavutil/log.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit f8bed30d8b. The reason
for this is that the overlap filter, which runs after IDCT, should run
on unclamped values, and thus IDCT and put_pixels() cannot be merged if
we want to attempt to be bitexact.
lowres option crashes with wmv2 files which I have for test,
so I think it's better to remove the support to the time when
lowres will be really supported by this codec
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vp8: frame-multithreading.
Duplicate Replace deprecated FF_*_TYPE symbols with AV_PICTURE_TYPE_*.
Duplicate Replace deprecated av_get_pict_type_char() with av_get_picture_type_char().
Bug spoted&removed in last merge: dpx: Do not use DPX encoder for decoding.
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/h264.c
libavcodec/mpeg12.c
libavcodec/mpeg4videodec.c
libavcodec/mpegvideo.c
libavcodec/mpegvideo_enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Do not use rlelen for buffer size in init_get_bits, it is
only the size of the data for the first field.
Since it is not reliable, just use the size of the whole buffer.
Additional comments add removal of unused rlelen variable by
Reimar Döffinger.
This means it uses full brightness range and brightness
increasing instead of decreasing with index of non-opaque
color.
Based on patch by Alexandre Colucci [alexandre elgato com]
* qatar/master:
ALPHA: Replace sized int_fast integer types with plain int/unsigned.
Duplicate DPX image encoder
Duplicate DPX decoder: read sample aspect ratio
Duplciate DPX decoder: add buffer size checks.
ac3enc: clip large coefficient values and negative exponents rather than using av_assert2().
ac3enc: do not store a bandwidth code for each channel.
ac3enc: remove bandwidth reduction as fallback for bit allocation failure.
ac3enc: merge compute_exp_strategy_ch() into compute_exp_strategy()
ac3enc: return error if frame+exponent bits are too large instead of using av_assert2().
ac3enc: differentiate between current block and reference block in bit_alloc()
ac3enc: simplify exponent_init() by calculating exponent_group_tab[] based on exponent group sizes.
ac3enc: simplify stereo rematrixing decision options
Include both URLs: Update URL to fate samples
Conflicts:
Changelog
doc/fate.txt
libavcodec/ac3enc.c
libavcodec/dpxenc.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
int/unsigned is the natural memory access type for CPUs, using sized types
for temporary variables, counters and similar just increases code size and
can possibly cause a slowdown.
They use now code identical to the AAC decoder.
The AC3 decoder previously did not check the data_size and
the dca decoder checked against and set wrong values for float.
The sample aspect ratio is a per-frame property, so it makes sense to
define it in AVFrame rather than in the codec/stream context.
Simplify application-level sample aspect ratio information extraction,
and allow further simplifications.
This is similar to what was done with pkt_pts. This simplifies the
operation of extracting the pos information from the AVPacket, and
allows further simplifications.
One of the causes of this bug is that the h264 parser defaults low_delay
to 1, but the h264 codec defaults low_delay to 0. Really Ugly.
After many hours of looking at this, I'm still not sure how has_b_frames
is *intended* to behave, but to me the implementation appears way more
complicated than it ought to be.
My patch relies on the encoder to set an optional field in the SPS. This
works for libx264 streams, but I'm not sure that all h264 encoders will
set it.
* commit '85770f2a2651497861ed938efcd0df3696ff5e45':
AVOptions: make default_val a union, as proposed in AVOption2.
Move ff_dynarray_add to lavu and make it public.
lavf: remove duplicate assignment in avformat_alloc_context.
lavf: use designated initializers for AVClasses.
options: simplify av_find_opt by using av_next_option.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
I still don't fully understand the cause but the difference between
the samples that trigger the bug and the samples that don't is
that the former uses delay frames and the later uses drop frames
as placeholders for the packed frame. So, if we see the one type
of frame, we can assume the bug will or won't be present.
Right now, I'm detecting the frame types by size, which may not be
safe in general, but given the specific codec and file type, I
expect any scenario where we encounter these frames where they
aren't being used for b-frame packing won't care one way or
another whether the work around is in effect or not.
Signed-off-by: Philip Langdale <philipl@overt.org>
* qatar/master:
Duplicate AMV: disable DR1 and don't override EMU_EDGE
Duplicate lavf: inspect more frames for fps when container time base is coarse
Wrong and we have correct fix: Fix races in default av_log handler
vorbis: Replace sized int_fast integer types with plain int/unsigned.
Remove disabled non-optimized code variants.
NO bswap.h: Remove disabled code.
Remove some disabled printf debug cruft.
Replace more disabled printf() calls by av_dlog().
NO tests: Remove disabled code.
NO Replace some commented-out debug printf() / av_log() messages with av_dlog().
vorbisdec: Replace some sizeof(type) by sizeof(*variable).
NO vf_fieldorder: Replace FFmpeg by Libav in license boilerplate.
Conflicts:
libavcodec/h264.c
libavcodec/vorbisdec.c
libavutil/log.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This works around a possibly exploitable crash.
Appearently, vlc can be exploited with a malicous file. This should get
reverted as soon as a proper fix is found.
Reported-at: Thu, 21 Apr 2011 14:38:25 +0000
Reported-by: Dominic Chell <Dominic.Chell@ngssecure.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 89f903b3d5)
(cherry picked from commit 9b919571e5)
int/unsigned is the natural memory access type for CPUs, using sized types
for temporary variables, counters and similar just increases code size and
can possibly cause a slowdown.
Make av_get_profile_name() return NULL if no profile is detected.
Fix trac issue #130, fix crash reading file tek3.m2v.
(cherry picked from commit e5d80c7b2d)
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
vorbisdec: Rename silly "class_" variable to plain "class".
simple_idct_alpha: Drop some useless casts.
Simplify av_log_missing_feature().
ac3enc: remove check for mismatching channels and channel_layout
If AVCodecContext.channels is 0 and AVCodecContext.channel_layout is non-zero, set channels based on channel_layout.
If AVCodecContext.channel_layout and AVCodecContext.channels are both non-zero, check to make sure they do not contradict eachother.
cosmetics: indentation
Check AVCodec.supported_samplerates and AVCodec.channel_layouts in avcodec_open().
aacdec: remove sf_scale and sf_offset.
aacdec: use a scale of 2 in the LTP MDCT rather than doubling the coefficient table values from the spec.
Define POW_SF2_ZERO in aac.h and use for ff_aac_pow2sf_tabp[] offsets instead of hardcoding 200 everywhere.
Large intensity stereo and PNS indices are legal. Clip them instead of erroring out. A magnitude of 100 corresponds to 2^25 so the will most likely result in clipped output anyway.
qpeg: use reget_buffer() in decode_frame()
ultimotion: use reget_buffer() in ulti_decode_frame()
smacker: remove unnecessary call to avctx->release_buffer in decode_frame()
avparser: don't av_malloc(0).
Merged-by: Michael Niedermayer <michaelni@gmx.at>
