encode_mb() calls encode_mb_internal() three times, once
for each supported chroma format. The reason for this is
that some chroma format dependent parameters can then be
inlined as encode_mb_internal() is marked as av_always_inline.
Yet the most basic parameters based upon chroma format have
not been inlined: The chroma format itself and the chroma
subsampling parameters. This commit does so.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Forgotten in cf1e0786ed.
(Both mpegvideodec as well as mpegvideoenc use me_cmp,
so this doesn't affect them.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This allows to remove the spurious dependencies of mpegvideo encoders
on error_resilience; some other components that do not use mpegvideo
to its fullest turned out to not need it either.
Adding a new CONFIG_EXTRA needs a reconfigure to take effect.
In order to force this a few unnecessary headers from lavfi/allfilters.c
have been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
An AVCodecContext's private data is always allocated
in avcodec_open2() and calling avcodec_flush_buffers()
on an unopened AVCodecContext (or an already closed one)
is not allowed (and will crash before the decoder's flush
function is even called).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is partially possible if it is inlined whether
we deal with MPEG-1/2, because no_rounding is never set
for MPEG-1/2.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Whether lowres is in use or not is inlined in
mpv_reconstruct_mb_internal(), so one can use the fact
that lowres is always zero during encoding to evaluate
the checks for whether one is encoding or not at compile-time
when one is in lowres mode.
Also reorder the main check to check for whether it is an encoder
first to shortcircuit it in the common case of a decoder.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The very first check in this if-else if-else if construct is
"if (s->encoding ||", i.e. in case of the WMV2 encoder the else
branches are never executed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The a53_cc option is only useful and meaningful for MPEG-2,
yet it was accidentally added for all mpegvideo-based encoders.
This means that it is possible for a53_cc to be set for other
encoders as well.
This commit changes this and reroutes a53_cc to the dummy field
in MpegEncContext for all codecs for which it is not supported.
This allows to avoid a check for the current codec in mpeg12enc.c.
Also add a compile-time check for whether the MPEG-2 encoder is
available while at it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible now that MJpegContext is allocated jointly
with MpegEncContext as part of the AVCodecContext's private data.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This factors the translation from MpegEncContext out
and will enable further optimizations in the next commits.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The generic code ensures that only codecs with
the FF_CODEC_CAP_AUTO_THREADS internal cap ever have to
handle the case avctx->thread_count == 0 themselves;
moreover, it is also ensured generically that only codecs
that support some form of threading have thread_count set
to something else than one. So these checks are unnecessary.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently, ff_mpv_encode_end() is the close function of
the two MJPEG-based encoders; it calls ff_mjpeg_encode_close()
for them which adds a check to the generic code.
This commit reverses the order of this relationship:
The MJPEG encoders directly use a custom close function
which in turn calls ff_mpv_encode_end(). This avoids the branch
in ff_mpv_encode_end() and makes the generic code more generic.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is done a second time for 5.0 because master was
merged into 5.0 so that it contains the recent DOVI additions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, we had a PacketList structure which is actually
a PacketListEntry; a proper PacketList did not exist
and all the related functions just passed pointers to pointers
to the head and tail elements around. All these pointers were
actually consecutive elements of their containing structs,
i.e. the users already treated them as if they were a struct.
So add a proper PacketList struct and rename the current PacketList
to PacketListEntry; also make the functions use this structure
instead of the pair of pointers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This function is quite small (96B with GCC 11.2 on x64 Ubuntu 21.10
at -O3), making it more economical to duplicate it into libavformat
instead of exporting it as avpriv: Doing so saves 2x24B in .dynsim,
2x16B in .dynstr, 2x2B .gnu.version, 24B in .rela.plt, 16B in .plt,
16B in .plt.sec (if enabled), 4B .gnu.hash; besides the actual
duplicated code this also adds 2x8B .eh_frame_hdr and 24B .eh_frame.
In other words: Duplicating is neutral size-wise (it is also presumed
neutral for other systems). Given that it avoids the runtime
overhead of dynamic symbols, it is advantageouos to duplicate the
function.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These arrays have a size of 180 resp. six bytes. This does not
make it worthwhile to export them due to the overhead this occurs;
for x64 Elf/Linux/GNU: 2x2B version, 2x24B .dynsym, 24B .rela.dyn,
8B .got, 4B hash + twice the size of the name (here 20+23B).
Therefore these symbols are unavprived and duplicated for shared
builds.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
avpriv_mpeg4audio_sample_rates has a size of 64B and it is currently
avpriv; a clone of it exists in aacenctab.h and from there it is inlined
in aacenc.c (which also uses the avpriv version) and in the FLV muxer.
This means that despite it being avpriv both libavformat as well as
libavcodec have copies already.
This situation is clearly suboptimal. Given the overhead of exporting
symbols (for x64 Elf/Linux/GNU: 2x2B version, 2x24B .dynsym, 24B .rela.dyn,
8B .got, 4B hash + twice the size of the name (here 31B)) the object is
unavprived, i.e. duplicated into libavformat when creating a shared
build; but the duplicates in the AAC encoder and FLV muxer are removed.
This involves splitting of the sample rate table into a file of its own;
this allowed to break some spurious dependencies (e.g. both the AAC
encoder as well as the Matroska demuxer actually don't need the
mpeg4audio_get_config stuff).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This group is mainly for the users of *_mpeg4audio_get_config2();
it is not for those who only use avpriv_mpeg4audio_sample_rates.
This is in preparation for splitting the latter into a file of its own;
if there were no CONFIG_EXTRA group for *_mpeg4audio_get_config2()
users, one would have to add a dependency to the new file for all
these users on top of the existing dependency on mpeg4audio.o.
Adding a new CONFIG_EXTRA group only takes effect after a reconfigure;
so in order to force a reconfigure some unnecessary headers from
libavdevice/alldevices.c have been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There are seven MJPEG-tables, five small (1x12, 4x17) and two
not small (2x162). These are all avpriv, despite this not being
worthwhile due to the overhead of exporting a symbol: The total
overhead for each symbol consists of two entries in .dynsym (24B each),
one entry in the importing library's .rela.dyn (24B) and one in .got
(8B) as well as 2x2B for symbol versions and 4B for symbol hashes
in the exporting library; in addition to that, the name of the symbol
is included in both exporting and importing libraries, using 2x210 bytes
in this case.
(The above numbers are for a x64 Elf/Linux/GNU system. Other platforms
will give different numbers.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Said table is 64 bytes long and exported so that it can be used both
in libavcodec and libavformat. This commit stops doing so and instead
duplicates it for shared builds, because the overhead of exporting the
symbol is bigger than 64 bytes. It consists of the length of the name of
the symbol (2x24 bytes), two entries in .dynsym (2x24 bytes), two
entries for symbol version (2x2 bytes), one hash value in the exporting
library (4 bytes) in addition to one entry in the importing library's
.got and .rela.dyn (8 + 24 bytes).
(The above numbers are for a Linux/GNU/Elf system; the numbers for other
platforms may be different.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is small (16 B) and therefore the overhead of exporting it more
than outweighs the size savings from not having duplicated symbols:
When the symbol is no longer avpriv, one saves twice the size of
the string containing the symbols name (2x30 byte), two entries
in .dynsym (24 bytes each on x64), one entry in the importing libraries
.got and .rela.dyn (8 + 24 bytes on x64) and two entries for the
symbol version (2 bytes each) and one hash value in the exporting
library (4 bytes).
(The exact numbers are of course different for other platforms
(e.g. when using dlls), but given that the strings saved alone
more than outweigh the array size it can be presumed that this
is beneficial for all platforms.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
libavcodec currently exports four avpriv symbols that deal with
PixelFormatTags: avpriv_get_raw_pix_fmt_tags, avpriv_find_pix_fmt,
avpriv_pix_fmt_bps_avi and avpriv_pix_fmt_bps_mov. The latter two are
lists of PixelFormatTags, the former returns such a list and the second
searches a list for a pixel format that matches a given fourcc; only
one of the aforementioned three lists is ever searched.
Yet for avpriv_pix_fmt_bps_avi, avpriv_pix_fmt_bps_mov and
avpriv_find_pix_fmt the overhead of exporting these functions actually
exceeds the size of said objects (at least for ELF; the following numbers
are for x64 Ubuntu 20.10):
The code size of avpriv_find_pix_fmt is small (GCC 10.2 37B, Clang 11 41B),
yet exporting it adds a 20B string for the name alone to the exporting
as well as to each importing library; there is more: Four bytes in the
exporting libraries .gnu.hash; two bytes each for the exporting as well
as each importing libraries .gnu.version; 24B in the exporting as well
as each importing libraries .dynsym; 16B+24B for an entry in .plt as
well as the accompanying relocation entry in .rela.plt for each
importing library.
The overhead for the lists is similar: The strings are 23B and the
.plt+.rela.plt pair is replaced by 8B+24B for an entry in .got and
a relocation entry in .rela.dyn. These lists have a size of 80 resp.
72 bytes.
Yet for ff_raw_pix_fmt_tags, exporting it is advantageous compared to
duplicating it into libavformat and potentially libavdevice. Therefore
this commit replaces all library uses of the four symbols with a single
function that is exported for shared builds. It has an enum parameter
to choose the desired list besides the parameter for the fourcc. New
lists can be supported with new enum values.
Unfortunately, avpriv_get_raw_pix_fmt_tags could not be removed, as the
fourcc2pixfmt tool uses the table of raw pix fmts. No other user of this
function remains.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Improves readability and slightly decreases codesize.
While just at it, also remove a check whether the packet list is
nonempty before freeing it, as freeing an empty list is fine
and basically a no-op.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This removes one of the last usages of sizeof(AVPacket)
in the generic muxing code.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In case of shared builds, some object files containing tables
are currently duplicated into other libraries: log2_tab.c,
golomb.c, reverse.c. The check for whether this is duplicated
is simply whether CONFIG_SHARED is true. Yet this is crude:
E.g. libavdevice includes reverse.c for shared builds, but only
needs it for the decklink input device, which given that decklink
is not enabled by default will be unused in most libavdevice.so.
This commit changes this by making it more explicit about what
to duplicate from other libraries. To do this, two new Makefile
variables were added: SHLIBOBJS and STLIBOBJS. SHLIBOBJS contains
the objects that are duplicated from other libraries in case of
shared builds; STLIBOBJS contains stuff that a library has to
provide for other libraries in case of static builds. These new
variables provide a way to enable/disable with a finer granularity
than just whether shared builds are enabled or not. E.g. lavd's
Makefile now contains: SHLIBOBJS-$(CONFIG_DECKLINK_INDEV) += reverse.o
Another example is provided by the golomb tables. These are provided
by lavc for static builds, even if one uses a build configuration
that makes only lavf use them. Therefore lavc's Makefile contains
STLIBOBJS-$(CONFIG_MXF_MUXER) += golomb.o, whereas lavf's Makefile
has a corresponding SHLIBOBJS-$(CONFIG_MXF_MUXER) += golomb_tab.o.
E.g. in case the MXF muxer is the only component needing these tables
only libavformat.so will contain them for shared builds; currently
libavcodec.so does so, too.
(There is currently a CONFIG_EXTRA group for golomb. But actually
one would need two groups (golomb_avcodec and golomb_avformat) in
order to know when and where to include these tables. Therefore
this commit uses a Makefile-based approach for this and stops
using these groups for the users in libavformat.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The packet given to muxers is not used afterwards; it is always
unreferenced by libavformat. Ergo muxers are allowed to keep
the references in the packets and e.g. move the ownership to
a packet list. This is what this commit does.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The earlier code did not account for the fact that
av_display_rotation_set() wants the angle in the anticlockwise
direction (despite what its documentation stated for a long time);
furthermore, the H.2645 spec wants the flips applied first,
whereas our code did it the other way around. This can be fixed
by negating the angle once for every flip.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The transpose filter has modes equivalent to "rotation by 90°/270°"
followed by horizontal flips.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In case of an orthogonal transformation av_display_rotation_get()
returns the (anticlockwise) degree that the unit vector in x-direction
gets rotated by; get_rotation in cmdutils.c makes a clockwise degree
out of this. So if one inserts a transpose filter corresponding to
this degree, then the x-vector gets mapped correctly and there are
two possibilities for image of the y-vector, namely the two unit
vectors orthogonal to the image of the x-vector.
E.g. if the x-vector gets rotated by 90° clockwise, then the two
possibilities for the y-vector are the unit vector in x direction
or its opposite. The latter case is a simple 90° rotation for both
vectors* whereas the former is a simple 90° clockwise rotation followed
by a horizontal flip. These two cases can be distinguished by looking
at the x-coordinate of the image of the y-vector, i.e. by looking
at displaymatrix[3]. Similarly for the case of a 270° clockwise
rotation.
These two cases were previously wrong (they were made to match
wrongly parsed exif rotation tag values).
*: For display matrices, the y-axis points downward.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The cases in which there was flipping together with a rotation
that is not a multiple of the identity were wrong.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The check here is meant to check for whether avcintra-class option
(default value -1) has been set; yet it checks for the x264_param_t
value where 0 is the default value (treated as "no avcintra-mode"
by x264). This meant that in-band extradata has been added unnecessarily
when using global headers; furthermore, the first output packet
had two x264 SEIs.
Reviewed-by: Limin Wang <lance.lmwang@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Every modification of the data that is copied in update_thread_context()
is a data race if it happens after ff_thread_finish_setup. ffv1dec's
update_thread_context() simply uses memcpy for updating the new context,
so that every modification of the src's context is a race.
Some of these modifications are unnecessary: picture_number is write-only
for the decoder and cur will be reset when decoding the next frame anyway.
So remove them. And while just at it, also don't set cur for the slice
contexts as this variable is write-only.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They test libavfilter internal API, so they should be libavfilter
test programs (which implies: linked statically to libavfilter
to access internal APIs and linked normally (statically or dynamically
depending upon the build configuration) against all the other libs).
Right now, they are always linked statically against all libs,
which is a significant size waste compared to shared libs as all
of libavcodec has been pulled in despite not being really used.
This also leads to linking failures on systems for which av_export_avutil
is intended: libavcodec does not expect to be linked statically
against the library providing avpriv_(cga|vga16)_font in this case.
This is fixed by this commit.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There is no mxfenc dependency any more since commit
b9a26b9d55.
Also remove a dnxhddata.h inclusion in mxfenc that was forgotten
in the very same commit.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible by incrementing the counter of allocated rects
directly after said allocation succeeded.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Do this by actually incrementing the counter for the number
of rects at the right time.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, various subtitle decoders have not cleaned up
the AVSubtitle on error; this task must not be left to the user
because the documentation explicitly states that the AVSubtitle
"must be freed with avsubtitle_free if *got_sub_ptr is set"
(which it isn't on error).
Leaks happen upon failure in ff_ass_add_rect() or in
ass_decode_frame(); freeing generically also allows to remove
now redundant freeing code in pgssubdec and dvbsubdec.
While just at it, also reset got_sub_ptr generically on error.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The caller of display_end_segment() frees the AVSubtitle on error
in case ENOMEM is returned or err_recognition is set to explode,
so display_end_segment() doesn't have to.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This piece of code has been added as FFmpeg's answer to
infinite loops in try_decode_frame() in commit
6072a19b4f. There is no loop
around try_decode_frame() any more, so this code can be removed.
This code is only triggered in case a) the codec parameter could
not be determined, b) the decode delay could not be guessed or
c) no packet was ever encountered and the encoder has the
AV_CODEC_CAP_CHANNEL_CONF. In these cases the new code will
no longer emit a "decoding for stream %d failed" message, which is
prima facie false. In case a) an additional "Could not find codec
parameters" message is (and will be) emitted. No warning will be
emitted any more in case b) (this happens e.g. with some
h264-conformance FATE-files).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When flushing, try_decode_frame() itself loops until the desired
properties have been found or the decoder is drained.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This puts it directly near the NALU type which is more natural
and furthermore reduces the size of the structure because it
can be placed in padding (on 64-bit systems).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Forgotten in 03b82b3ab9.
(Moving data to the front is only done to make existing
initializations like H2645NAL nal = { NULL } not emit int->pointer
conversion warnings.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
ffmal_add_packet() basically duplicated the logic in
av_packet_make_refcounted() with the added twist that it always
created a reference even if one is already available.
This commit stops doing this.
Tested-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Improves readability and avoids a redundant index variable
that was mistakenly called "tracksize".
Reviewed-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Andreas Rheinhardt