It refers to the uncompressed quantization, therefore is not correct for AAC.
Also change mxf_set_pts to work based on current edit unit if
bits_per_coded_sample is not available.
Fixes error messages in the sample of ticket #7366.
Signed-off-by: Marton Balint <cus@passwd.hu>
Also make sure we set the URL context max packet size accordingly.
Based on a patch by Tudor Suciu <tudor.suciu@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
This way if an index table segment is present multiple times, we can always use
the proper one instead of the invalid one.
Fixes seeking in the sample of ticket #5671.
Signed-off-by: Marton Balint <cus@passwd.hu>
Without this check some crafted files might crash because a packet might be
demuxed which have no corresponding mxf track.
Signed-off-by: Marton Balint <cus@passwd.hu>
This was reduced from 128 in libav commit
192f1984b1, but since we support unknown channel
layouts, we can increase this limit.
Fixes ticket #6332.
Signed-off-by: Marton Balint <cus@passwd.hu>
SDL from version 2.0.8 has support for full range YUV and specifying
BT601/BT709 color space for YUV->RGB conversion.
Signed-off-by: Marton Balint <cus@passwd.hu>
For clip wrapped essences this should work. Also, since index_edit_rate can now
be different from track edit rate, remove overriding track edit rate.
Signed-off-by: Marton Balint <cus@passwd.hu>
And let the generic code figure out the proper PTS. This is needed because apng
does not provide seek functions, but after a generic seek (e.g. to file start)
timestamps are not reset which causes broken timestamps when looping apngs,
like in ticket #6121.
Signed-off-by: Marton Balint <cus@passwd.hu>
The input thread needs to be properly cleaned up and re-initalized before we
can start reading again in threaded mode. (Threaded input reading is used when
there is mode than one input file).
Fixes ticket #6121 and #7043.
Signed-off-by: Marton Balint <cus@passwd.hu>
Also make sure we set a valid track index sid and a valid track edit rate in
order for the index to be useful.
Signed-off-by: Marton Balint <cus@passwd.hu>
Current ffplay code assumes that the read thread is in its main loop before any
key events are captured, but apparently on IOS even keypresses without a window
are forwared.
Fixes ticket #7252.
Signed-off-by: Marton Balint <cus@passwd.hu>
The default memory allocator is limited in the max number of frames available,
and therefore caused frame drops if the frames were not freed fast enough.
Signed-off-by: Marton Balint <cus@passwd.hu>
My conversation from AVFormatContext->filename to AVFormatContext->url was
wrong in this case because get_chunk_filename uses filename as an output
buffer, and not as an input buffer.
Fixes ticket #7188.
Signed-off-by: Marton Balint <cus@passwd.hu>
Most decoders (pgssubdec, ccaption_dec) are using -1 or UINT32_MAX for a
subtitle event which should be cleared at the next event.
Signed-off-by: Marton Balint <cus@passwd.hu>
Create a buffer from the data instead and use the buffer destructor to free the
DeckLink frame. This avoids a memcpy of the frame data.
Signed-off-by: Marton Balint <cus@passwd.hu>
Temporarily keep the old method for ffmpeg_filters.c choose_pix_fmt and
avfiltergraph.c pick_format() until a paletted pixel format without alpha is
introduced.
Signed-off-by: Marton Balint <cus@passwd.hu>
The specs says that the the first color component in the color array is
not alpha, but simply 0.
Fixes 0 alpha of fate-suite/cvid/catfight-cvid-pal8-partial.mov
Signed-off-by: Marton Balint <cus@passwd.hu>
Show a more useful error message which specifies the required driver version
for the build, and use the correct context in the error message for WIN32.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes parsing of expressions like c0=c0+c0 or c0=c0|c0=c1. Previously no
error was thrown and for input channels, only the last gain factor was used,
for output channels the source channel gains were combined.
Signed-off-by: Marton Balint <cus@passwd.hu>
The generic code should be able to finish the streams just fine initializing
and flushing the filters and codecs properly.
Fixes the following command:
ffmpeg -f lavfi -i "testsrc=d=0.1[out0];aevalsrc=0:d=0[out1]" -af apad -shortest -f framecrc -
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes a regression since 2a88ebd096 which caused
an infinite loop in the subtitle decoding.
Fixes ticket #6796.
Signed-off-by: Marton Balint <cus@passwd.hu>
Accepting 'u' suffix for a time specification is neither intuitive nor
consistent (now that we don't accept m). Also there was a bug in the code
accepting an extra 's' even after 'ms'.
Signed-off-by: Marton Balint <cus@passwd.hu>
Consider edit rate when determining edit_units_per_packet and also make sure
that checks are done in edit rate time base and not in stream time base.
Fixes some errors reported with the sample in ticket #5863.
Signed-off-by: Marton Balint <cus@passwd.hu>
Obviously this is still not perfect, but better then it was. Using the first
index table and mxf->current_edit_unit is still hardcoded in many places, so
this change has hopefully the less chance of breaking anything that works
now.
Signed-off-by: Marton Balint <cus@passwd.hu>
Use body_offset of the partitions to search for the partition with the given
offset in the essence. This makes the function find the correct partition for
non frame-wrapped essences as well, where only the essence data is part of the
the edit unit byte count, not the KLV-s.
Signed-off-by: Marton Balint <cus@passwd.hu>
In order to do that we have to parse the EssenceContainerData and assign the
proper body_sid and index_sid to the tracks from the corresponding source
packages.
This fixes packets returned in the wrong stream for some OP1-b files.
Based on a patch by Alex Mogurenko from https://github.com/da8eat/FFmpeg
Reference: http://mogurenko.com/2018/01/02/mxf-op1b-ffmpeg-part1/
Signed-off-by: Marton Balint <cus@passwd.hu>
The reference point for a KAG is the first byte of the key of a Partition Pack.
Fixes ticket #2817.
Fixes ticket #5317.
Signed-off-by: Marton Balint <cus@passwd.hu>
In a recent commit the default was changed from 0 (component) to 5
(unspecified), however some standards require using 0. With this option, the
user will be able to do so.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
This will replace the 1024 character limited filename field. Compatiblity for
output contexts are provided by copying filename field to URL if URL is unset
and by providing an internal function for muxers to set both url and filename
at once.
Signed-off-by: Marton Balint <cus@passwd.hu>
This is done mainly in preparation for the SIMD patches.
- for the 8-bit input, decrease the blend factor precision to 7-bit.
- for the 16-bit input, increase the blend factor precision to 15-bit.
- make sure the blend functions are not called with 0 or maximum blending
factors, because we don't want the signed factor integers to overflow.
Fate test changes are due to different rounding.
Signed-off-by: Marton Balint <cus@passwd.hu>
The framerate filter was quite convoluted with some filter_frame /
request_frame logic bugs. It seemed easier to rewrite the whole filter_frame /
request_frame part and also the frame interpolation ratio calculation part in
one step.
Notable changes:
- The filter now only stores 2 frames instead of 3
- filter_frame outputs all the frames it can to be able to handle consecutive
filter_frame calls which previously caused early drops of buffered frames.
- because of this, request_frame is largely simplified and it only outputs
frames on flush. Previously consecuitve request_frame calls could cause the
filter to think it is in flush mode filling its buffer with the same frames
causing a "ghost" effect on the output.
- PTS discontinuities are handled better
- frames with unknown PTS values are now dropped
Fixes ticket #4870.
Probably fixes ticket #5493.
Signed-off-by: Marton Balint <cus@passwd.hu>
It was truncated to int later on anyway. Fate test changes are due to rounding
instead of truncation.
Fixes fate test failures on x86-32 (gcc 4.8 (Ubuntu 4.8.5-2ubuntu1~14.04.1))
after 090b740680.
Signed-off-by: Marton Balint <cus@passwd.hu>
Also, do not overread input if linesize > width, or linesize is not divisible
by 8, and use the proper rounded width/height for MAFD calculation.
Signed-off-by: Marton Balint <cus@passwd.hu>
This speeds up the filter, and also fixes scene change detection score which is
reduced based on the difference of the current MAFD to the preivous MAFD.
Obviously if we compare two frames twice, the difference will be 0...
Signed-off-by: Marton Balint <cus@passwd.hu>
- normalize score to [0..100] instead of [0..85]
- change the default score to 8.2 to roughly keep existing behaviour
- take into account bit depth
- do not truncate to integer
Signed-off-by: Marton Balint <cus@passwd.hu>
Marton Balint