With this helper API, filters that used the first framesync
helper API can easily be changed to use the new and more
extensible design for filters with a single activate() callback.
framesync2 will be the base for the version using activate.
Most of the logic will be the same, but the code cannot be shared.
Copying the file initially without change will make the diff
easier to read.
This reverts commit 04aa09c4bc
and reintroduces 0ff5567a30 that
was temporarily reverted due to minor regressions.
It also reverts e5bce8b4ce that fixed FATE refs.
The fate-ffm change is caused by field_order now being set
on the output format because the first frame arrives earlier.
The fate-mxf change is assumed to be the same.
That line has been written by previous job.
Fix tsan warning.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>
For the blue and violet noise, I took the pink and brown noise
respectively and subtracted the offsets instead of adding them. When I
eyeball the frequency spectrum of the resulting outputs it looks correct
to me, i.e. the blue graph appears to be a mirror image of the pink, and
the same can be said of the violet and the brown. I did not do anything
else to confirm the correctness.
This one changes the previous vmaf patch to libvmaf to keep it separate from the
native implementation of vmaf inside ffmpeg later.
Signed-off-by: Ashish Singh <ashk43712@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The scale2ref filter will now maintain the DAR of the main input and
not the DAR of the reference input. This previous behavior was deemed
counterintuitive for most (all?) use-cases.
Before:
scale2ref=iw/4:ow/mdar
in w:320 h:240 fmt:rgb24 sar:1/1
ref w:640 h:360 fmt:rgb24 sar:1/1
out w:160 h:120 fmt:rgb24 sar:4/3 flags:0x2
SAR: ((120 * 640) / (160 * 360)) * (1 / 1) = 4 / 3
DAR: (160 / 120) * (4 / 3) = 16 / 9
(main out now same DAR as ref)
Now:
scale2ref=iw/4:ow/mdar
in w:320 h:240 fmt:rgb24 sar:1/1
ref w:640 h:360 fmt:rgb24 sar:1/1
out w:160 h:120 fmt:rgb24 sar:1/1 flags:0x2
SAR: ((120 * 320) / (160 * 240)) * (1 / 1) = 1 / 1
DAR: (160 / 120) * (1 / 1) = 4 / 3
(main out same DAR as main in)
The scale2ref FATE test has also been updated.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The input width and height is known at parse time so there's no
reason ow/oh should not be usable when using 0 as the width or
height expression.
Previously in "scale=0:ow" ow would be set to "0" which works,
conveniently, as "scale=0:0" is perfectly valid input but this breaks
down when you do something like "scale=0:ow/4" which one could
reasonably expect to work as well, but does not as ow is 0 not the
real value.
This change handles the 0 case for w/h immediately so the ow/oh
variables work as expected. Consequently, the rest of the code does
not need to handle 0 input. w/h will always be > 0 or < 0.
The second explicit (int) cast ensures that ow/oh appear as integers
as a user might expect when dealing with pixel dimensions.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This is something of a hack. It allocates a new hwframe context for
the target format, then maps it back to the source link and overwrites
the input link hw_frames_ctx so that the previous filter will receive
the frames we want from ff_get_video_buffer(). It may fail if
the previous filter imposes any additional constraints on the frames
it wants to use as output.
(cherry picked from commit 81a4cb8e58)
In order to work correctly with the i965 driver, this also fixes the
direction of forward/backward references - forward references are
intended to be those from the past to the current frame, not from the
current frame to the future.
(cherry picked from commit 9aa251c98c)
ff_scale_eval_dimensions blindly assumes that two inputs are always
available as of 3385989b98. This is
notably not the case when the function is called for the scale
filter. With the scale filter inputs[1] does not exist.
ff_scale_eval_dimensions now has an updated scale2ref check that
makes certain two inputs are actually available before attempting to
access the second one.
Thanks to James Almer for reporting this bug. This should fix the 820
Valgrind tests I single-handedly managed to break.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Variables pertaining to the main video are now available when
using the scale2ref filter. This allows, as an example, scaling a
video with another as a reference point while maintaining the
original aspect ratio of the primary/non-reference video.
Consider the following graph: scale2ref=iw/6:-1 [main][ref]
This will scale [main] to 1/6 the width of [ref] while maintaining
the aspect ratio. This works well when the AR of [ref] is equal to
the AR of [main] only. What the above filter really does is
maintain the AR of [ref] when scaling [main]. So in all non-same-AR
situations [main] will appear stretched or compressed to conform to
the same AR of the reference video. Without doing this calculation
externally there is no way to scale in reference to another input
while maintaining AR in libavfilter.
To make this possible, we introduce eight new constants to be used
in the w and h expressions only in the scale2ref filter:
* main_w/main_h: width/height of the main input video
* main_a: aspect ratio of the main input video
* main_sar: sample aspect ratio of the main input video
* main_dar: display aspect ratio of the main input video
* main_hsub/main_vsub: horiz/vert chroma subsample vals of main
* mdar: a shorthand alias of main_dar
Of course, not all of these constants are needed for maintaining the
AR, but adding additional constants in line of what is available for
in/out allows for other scaling possibilities I have not imagined.
So to now scale a video to 1/6 the size of another video using the
width and maintaining its own aspect ratio you can do this:
scale2ref=iw/6:ow/mdar [main][ref]
This is ideal for picture-in-picture configurations where you could
have a square or 4:3 video overlaid on a corner of a larger 16:9
feed all while keeping the scaled video in the corner at its correct
aspect ratio and always the same size relative to the larger video.
I've tried to re-use as much code as possible. I could not find a way
to avoid duplication of the var_names array. It must now be kept in
sync with the other (the normal one and the scale2ref one) for
everything to work which does not seem ideal. For every new variable
introduced/removed into/from the normal scale filter one must be
added/removed to/from the scale2ref version. Suggestions on how to
avoid var_names duplication are welcome.
var_values has been increased to always be large enough for the
additional scale2ref variables. I do not forsee this being a problem
as the names variable will always be the correct size. From my
understanding of av_expr_parse_and_eval it will stop processing
variables when it runs out of names even though there may be
additional (potentially uninitialized) entries in the values array.
The ideal solution here would be using a variable-length array but
that is unsupported in C90.
This patch does not remove any functionality and is strictly a
feature patch. There are no API changes. Behavior does not change for
any previously valid inputs.
The applicable documentation has also been updated.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Using AVOnce as a stack variable makes no sense as the state is lost
when the function exits.
This fixes repeated calls to av(filter/device)_register_all
Modifying data pointer when skipping samples may make it unaligned.
Workaround for Ticket6349.
This should fix the crash of ticket's testcase and a crash/regression
with avxsynth (reported by Michael Niedermayer).
Also change frame->nb_samples < max to frame->nb_samples <= max.
This improves performance. Benchmark:
./ffmpeg -filter_complex "aevalsrc=0:n=1166,firequalizer=fixed=on" -f null null
old:
25767 decicycles in take_samples, 1023 runs, 1 skips
25422 decicycles in take_samples, 2047 runs, 1 skips
25181 decicycles in take_samples, 4095 runs, 1 skips
24904 decicycles in take_samples, 8191 runs, 1 skips
new:
550 decicycles in take_samples, 1024 runs, 0 skips
548 decicycles in take_samples, 2048 runs, 0 skips
545 decicycles in take_samples, 4096 runs, 0 skips
544 decicycles in take_samples, 8192 runs, 0 skips
Reviewed-by: Nicolas George <george@nsup.org>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>
See http://lists.ffmpeg.org/pipermail/ffmpeg-user/2017-April/035975.html
Parsed_filter_X could remain and user can override it with custom one.
Example:
ffplay -f lavfi "nullsrc=s=640x360,
sendcmd='1 drawtext@top reinit text=Hello; 2 drawtext@bottom reinit text=World',
drawtext@top=x=16:y=16:fontsize=20:fontcolor=Red:text='',
drawtext@bottom=x=16:y=340:fontsize=16:fontcolor=Blue:text=''"
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>
* commit '92db5083077a8b0f8e1050507671b456fd155125':
build: Generate pkg-config files from Make and not from configure
build: Store library version numbers in .version files
Includes cherry-picked commits 8a34f36593 and
ee164727dd to fix issues.
Changes were also made to retain support for raise_major and build_suffix.
Reviewed-by: ubitux
Merged-by: James Almer <jamrial@gmail.com>
* commit '11a9320de54759340531177c9f2b1e31e6112cc2':
build: Move build-system-related helper files to a separate subdirectory
"ffbuild" directory name is used instead of "avbuild".
Merged-by: Clément Bœsch <u@pkh.me>
This complex (-1 2 6 2 -1) filter slightly less reduces interlace 'twitter' but better retain detail and subjective sharpness impression compared to the linear (1 2 1) filter.
Signed-off-by: Thomas Mundt <tmundt75@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This should help coverity realize that src[] is inited
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
or if x/y go beyond padded area.
This is mostly useful when paired with the aspect option.
Defaults aren't changed.
Idea for this was taken from mpv's soon-to-be-removed expand vf.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
* commit 'ce6f780bc6656ad3895f81a988b239ad3c8af4b8':
configure: Add missing asyncts filter, movie filter, and output example deps
Merged-by: James Almer <jamrial@gmail.com>
