Cleanup the applehttp as demuxer name, when use the command :
ffmpeg -formats, get the confused information like:
"
E hls Apple HTTP Live Streaming
D hls,applehttp Apple HTTP Live Streaming
"
we don't use applehttp as the demuxer/muxer name usually, so
cleanup the applehttp and update the documents.
After the change, get the information from "ffmpeg -formats":
"
DE hls Apple HTTP Live Streaming
"
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Fix ticket #7297
The current setting for send-expect-100 option is either
enabled if applicable or forced enabled, no option to force
disable the header. This change is to expand the option setting
to provide more flexibility, which is useful for rstp case.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The lensfun filter wraps the lensfun library which performs
transformations on videos to correct for lens distortion. Often this
results in areas in the input being mapped to areas that fall outside
the boundaries of the output. The library has a parameter called scale
which is a scale factor applied to the output video. By decreasing it it
is possible to regain the areas of the video which would otherwise have
been lost. There is a special value of 0 which indicates that the
library should automatically determine a scale factor that results in
the output frame being filled (i.e. little or no black/unmapped areas).
This patch adds a corresponding scale option to the lensfun filter which
is passed through to the library. The existing behaviour of using the
automatic value of 0 is retained as the default behaviour, while other
values will be passed through to the library.
Signed-off-by: Daniel Playfair Cal <daniel.playfair.cal@gmail.com>
Nobody is going to check the queue anymore, so users must now subscribe to
send messages to ffmpeg-devel. This will prevent orphaned/ignored messages
from rotting in the abandoned queue. This matches the behavior of ffmpeg-user
and libav-user.
Also, this addresses some other nits.
Signed-off-by: Lou Logan <lou@lrcd.com>
set_metadata with many entries is not very efficient, and with small audio
frames the performance loss is noticable. Also with this very simple
calculations (like peak) can be even further optimized.
Unfoturnately there are some small differences in metadata and av_log info
output, so factorizing calculations and output might not worth the hassle.
Signed-off-by: Marton Balint <cus@passwd.hu>
This removes lots of code duplication and also allows more complex specifiers,
for example you can use p:204:aⓂ️language:eng to select the English language
audio stream from program 204.
Signed-off-by: Marton Balint <cus@passwd.hu>
* Outputs ASS lines with basic coloring and font scaling for each
given region.
* Sets the default style to the resolution of the subtitle plane
(for example, 960x540 / 36pt font for profile A).
* Has options to:
* Disable ruby text (which is coded as regions which have
half-height text in libaribb24).
Enabled by default as without positioning ruby text only
confuses as it is usually coded in the beginning of the decoded
subtitle line.
* Set the working directory, in which libaribb24 will read
configuration as well as into which it may save broadcast extra
symbols as PNG.
Unset by default.
The unconventional library check can be explained by the library's
current master branch being licensed as LGPLv3, but at the time of
writing the latest official release is still licensed under GPLv3.
Thus, one either has to wait for the following release, or enable
GPLv3.
This attaches the logic of picking the mode of for the next picture to
the output, which simplifies some choices by removing the concept of
the picture for which input is not yet available. At the same time,
we allow more complex reference structures and track more reference
metadata (particularly the contents of the DPB) for use in the
codec-specific code.
It also adds flags to explicitly track the available features of the
different codecs. The new structure also allows open-GOP support, so
that is now available for codecs which can do it.
The encoders such as libx264 support different QPs offset for different MBs,
it makes possible for ROI-based encoding. It makes sense to add support
within ffmpeg to generate/accept ROI infos and pass into encoders.
Typical usage: After AVFrame is decoded, a ffmpeg filter or user's code
generates ROI info for that frame, and the encoder finally does the
ROI-based encoding.
The ROI info is maintained as side data of AVFrame.
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This commit adds configuration options to libvpxenc.c that can be used to
tune the sharpness parameter for VP8 and VP9.
Signed-off-by: Rene Claus <rclaus@google.com>
Signed-off-by: James Zern <jzern@google.com>
Apple doesn't have an official spec for LHLS. Meanwhile hls.js player folks are
trying to standardize a open LHLS spec. The draft spec is available in https://github.com/video-dev/hlsjs-rfcs/blob/lhls-spec/proposals/0001-lhls.md
This option will also try to comply with the above open spec, till Apple's spec officially supports it.
Applicable only when @var{streaming} and @var{hls_playlist} options are enabled.
When dashenc has to run for long duration(say 24x7 live stream), one can enable this option to ignore the io failure of few segment's upload due to an intermittent network issues.
When the network connection recovers dashenc will continue with the upload of the current segments, leading to the recovery of the stream.
The file name template options now support a new "$ext$" placeholder,
which is replaced with a filename extension specific for the selected
file format. This is useful for the new "auto" format mode, when
different streams may use different file formats, and it is not
possible to specify the correct file name extension exactly.
Resolves warnings in the log about webm segments not having webm extensions.
This commit restores the ability to create DASH streams with codecs
that require different containers that was lost after commit
2efdbf7367. It adds a new "auto" value for
the dash_segment_type option and makes it the default. When in this mode,
the segment format will be chosen based on the codec used in the stream:
webm for Vorbis, Opus, VP8 or VP9, mp4 otherwise.
This commit adds configuration options to libvpxenc.c that can be used to
enable VP8 temporal scalability. It also adds a way to programmatically set the
per-frame encoding flags which can be used to control usage and updates of
reference frames while encoding with temporal scalability enabled.
Signed-off-by: James Zern <jzern@google.com>
This is a cuda implementation of yadif, which gives us a way to
do deinterlacing when using the nvdec hwaccel. In that scenario
we don't have access to the nvidia deinterlacer.
This fixes the grammar of two HLS option descriptions and makes them less
ambiguous.
Signed-off-by: Werner Robitza <werner.robitza@gmail.com>
Signed-off-by: Lou Logan <lou@lrcd.com>
This is needed because of 32bit float formats (which are difficult to
store in 16bits)
This also fixes undefined behavior found by fate
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This adds common code to query driver support and set appropriate
address/size information for each slice. It only supports rectangular
slices for now, since that is the most common use-case.
Several SRT options are missing. Since pkg_config requires libsrt v1.3.0 and above, it should be able to support options added in libsrt v1.3.0 and below.
This commit adds 8 SRT options.
sndbuf, rcvbuf, lossmaxttl, minversion, streamid, smoother, messageapi and transtype
The keys of option are equivalent to stransmit.
https://github.com/Haivision/srt/blob/v1.3.0/apps/socketoptions.hpp#L196-L223
Signed-off-by: Marton Balint <cus@passwd.hu>
Allows arrangement of multiple windows such as:
ffmpeg -re -f lavfi -i mandelbrot -f sdl -window_x 1 -window_y 1 mandelbrot -vf waveform,format=yuv420p -f sdl -window_x 641 -window_y 1 waveform -vf vectorscope,format=yuv420p -f sdl -window_x 1 -window_y 481 vectorscop
Some changes by Marton Balint:
- allow negative position (partially or fully out-of-screen positions seem to
be sanitized automatically by SDL (or my WM?), so no special handling is
needed)
- only show window after the position is set
- do not use resizable and borderless flags at the same time, that caused
issues in ffplay
- add docs
Signed-off-by: Marton Balint <cus@passwd.hu>
