The NUT and avi demuxers only need ff_codec_movvideo_tags and so this
removes a dependency on the rest of isom.c as well as on mpeg4audio.c
(which isom depends on); it is similar for the Matroska demuxer and
muxers, except that the mpeg4audio.c dependency can't be avoided.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It only existed because some code in mjpegenc_common.c relied on it;
yet said code was actually only used by mjpegenc.c and has been moved
there.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The avrn decoder actually only needs one thing: The MJPEG decoder.
Instead the Makefile made it compile mjpegdec and configure required
some of the prerequisites of the MJPEG decoder (exif and jpegtables).
Even if all the prerequisites of the MJPEG decoder were required, it
would still not make the MJPEG decoder usable, because for that
the MJPEG decoder needs to be in the list of codecs in codec_list.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The fixed-point AAC decoder is the only user of the fixed-point sinewin
tables from sinewin; and it only uses a few of them (about 10% when
counting by size). This means that guarding initializing these tables by
an AVOnce (as done in 3719122065) is
unnecessary for them. Furthermore the array of pointers to the
individual arrays is also unneeded.
Therefore this commit moves these tables directly into aacdec_fixed.c;
this is done by ridding the original sinewin.h and sinewin_tablegen.h
headers completely of any fixed-point code at the cost of a bit of
duplicated code (the alternative is an ugly ifdef-mess).
This saves about 58KB from the binary when using hardcoded tables (as
these tables are hardcoded in this scenario); when not using hardcoded
tables, most of these savings only affect the .bss segment, but the rest
(< 1KB) contains relocations (i.e. savings in .data.rel.ro).
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Setting the defaults for $arch happens only later, so
the current code would not set AS correctly if --arch
was not specified on the command-line.
Fix it by adding an explicit fallback to $arch_default.
Signed-off-by: Josh Dekker <josh@itanimul.li>
avcodec has no facilities to generate timestamps properly from
output frame numbers (and it would be wrong for VFR anyway),
so pass through the timestamps using rav1e's opaque user data
feature, which was added in v0.4.0.
This bumps the minimum librav1e version to 0.4.0.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This was introduced in version 4.6. And may not exist all without an
optional package. So to prevent a hard dependency on needing the Linux
kernel headers to compile, make this optional.
Also ignore the status of the ioctl, since it may fail on older kernels
which don't support it. It's okay to ignore as its not fatal and any
serious errors will be caught later by the mmap call.
SMVJPEG stores frames as slices of a big JPEG image. The decoder is
implemented as a wrapper that instantiates a full internal MJPEG
decoder, then forwards the decoded frames with offset data pointers.
This is unnecessarily complex and fragile, not supporting useful decoder
capabilities like direct rendering.
Re-implement the decoder inside the MJPEG decoder, which is accomplished
by returning each decoded frame multiple times, setting cropping
information appropriately on each instance.
One peculiar aspect of the previous design is that since
- the smvjpeg decoder returns one frame per input packet
- there are multiple frames in each packets (the aformentioned slices)
the demuxer needs to return each packet multiple times.
This is now also eliminated - the demuxer now returns each packet
exactly once, with the duration set to the number of frames it decodes
to.
This also removes one of the last remaining internal uses of the old
video decoding API.
The manual states "there is virtually no reason to use that encoder.".
It supports less sample formats than the native encoder, is less efficient
than the native encoder and is also slower and pretty much remains untested.
libwavpack also isn't being fuzzed, which given that we plug the parameters
without any sanitizing them looks concerning.
AV1 decoder is supported on Tiger Lake+ platforms since libmfx 1.34
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Signed-off-by: Zhong Li <zhongli_dev@126.com>
Currently, every filter needs to provide code to transfer data from
AVFrame* to model input (DNNData*), and also from model output
(DNNData*) to AVFrame*. Actually, such transfer can be implemented
within DNN module, and so filter can focus on its own business logic.
DNN module also exports the function pointer pre_proc and post_proc
in struct DNNModel, just in case that a filter has its special logic
to transfer data between AVFrame* and DNNData*. The default implementation
within DNN module is used if the filter does not set pre/post_proc.
This AV1 decoder is currently only used for hardware accelerated decoding.
It can be extended into a native decoder in the future, so set its name to
"av1" and temporarily give it the lowest priority in the codec list.
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: James Almer <jamrial@gmail.com>
There are compiler and runtime check for MSA and MMI.
Remove the redundant setting of MSA and MMI for cores specified by "--cpu".
Signed-off-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The latest builds of glslang introduce new libraries that need to be
linked for all symbols to be fully resolved.
This change will break building against older installations of glslang
and it's very hard to tell them apart as the library change upstream
was not accompanied by any version bump and no official release has
been made with this change it - just lots of people packaging up git
snapshots. So, apologies in advance.
The most useful feature here is the ability to automatically extract the
framebuffer format and modifiers. It also makes support for multi-plane
framebuffers possible, though none are added to the format table in this
patch.
This requires libdrm 2.4.101 (from April 2020) to build, so it includes a
configure check to allow compatibility with existing distributions. Even
with libdrm support, it still won't do anything at runtime if you are
running Linux < 5.7 (before June 2020).
To enable runtime detection for MIPS, we need to refine ffbuild
part to support buildding these feature together.
Firstly, we fixed configure, let it probe native ability of toolchain
to decide wether a feature can to be enabled, also clearly marked
the conflictions between loongson2 & loongson3 and Release 6 & rest.
Secondly, we compile MMI and MSA C sources with their own flags to ensure
their flags won't pollute the whole program and generate illegal code.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
OpenVINO is a Deep Learning Deployment Toolkit at
https://github.com/openvinotoolkit/openvino, it supports CPU, GPU
and heterogeneous plugins to accelerate deep learning inferencing.
Please refer to https://github.com/openvinotoolkit/openvino/blob/master/build-instruction.md
to build openvino (c library is built at the same time). Please add
option -DENABLE_MKL_DNN=ON for cmake to enable CPU path. The header
files and libraries are installed to /usr/local/deployment_tools/inference_engine/
with default options on my system.
To build FFmpeg with openvion, take my system as an example, run with:
$ export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/deployment_tools/inference_engine/lib/intel64/:/usr/local/deployment_tools/inference_engine/external/tbb/lib/
$ ../ffmpeg/configure --enable-libopenvino --extra-cflags=-I/usr/local/deployment_tools/inference_engine/include/ --extra-ldflags=-L/usr/local/deployment_tools/inference_engine/lib/intel64
$ make
Here are the features provided by OpenVINO inference engine:
- support more DNN model formats
It supports TensorFlow, Caffe, ONNX, MXNet and Kaldi by converting them
into OpenVINO format with a python script. And torth model
can be first converted into ONNX and then to OpenVINO format.
see the script at https://github.com/openvinotoolkit/openvino/tree/master/model-optimizer/mo.py
which also does some optimization at model level.
- optimize at inference stage
It optimizes for X86 CPUs with SSE, AVX etc.
It also optimizes based on OpenCL for Intel GPUs.
(only Intel GPU supported becuase Intel OpenCL extension is used for optimization)
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Signed-off-by: Pedro Arthur <bygrandao@gmail.com>
This contains encoder wrappers for H264, HEVC, AAC, AC3 and MP3.
This is based on top of an original patch by wm4
<nfxjfg@googlemail.com>. The original patch supported both encoding
and decoding, but this patch only includes encoding.
The patch contains further changes by Paweł Wegner
<pawel.wegner95@gmail.com> (primarily for splitting out the encoding
parts of the original patch) and further cleanup, build compatibility
fixes and tweaks for use with Qualcomm encoders by Martin Storsjö.
Signed-off-by: Martin Storsjö <martin@martin.st>
