lavfi has been considered to be stable for a while now, so it is enabled
in most configurations. Supporting avplay without lavfi requires a lot
of nontrivial ifdef mess for no good reason.
4.9 was released precisely nine years after the first GCC version with
autovectorizer (4.0) and six years after the first GCC version with
`-ftree-vectorize` default to enabled on `-O3` (4.3). We've given GCC
enough time to fix those bugs.
FATE passes here on a x86-64 machine with both GCC 4.9.2 and 5.3.1.
Some optimization hotspots benefit greatly from this change, especially
those without handwritten assembly. For instance, the main function in
vf_phase is now 1.6x faster (1.2x overall) on my machine.
Or when building in-tree.
Also don't try to remove src on distclean in these cases.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The configure detection is bumped to X265_BUILD >= 68,
since API version 68 corresponds with the x265 1.8
release tarball. The warnings inside x265 about
12-bit being experimental were removed prior to API
version 72 a short time later. At this time of
writing, X265_BUILD is at version 80.
12-bit support in the HEVC standard was approved in
October 2014 as part of HEVC Version 2 and published
in January 2015:
http://www.itu.int/ITU-T/recommendations/rec.aspx?rec=12296http://www.itu.int/rec/T-REC-H.265-201410-Shttps://hevc.hhi.fraunhofer.de/rext
Reveiwed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The COPYING.LIB file in the zvbi source tree as well as libzvbi.h references
the GNU Library General Public License version 2 since version 0.2.28.
Signed-off-by: Marton Balint <cus@passwd.hu>
This uses a new MMAL feature, which limits the number of extra frames
that can be buffered within the decoder. VIDEO_MAX_NUM_CALLBACKS can
be defined as positive or negative number. Positive numbers are
absolute, and can lead to deadlocks if the user underestimates the
number of required buffers. Negative numbers specify the number of extra
buffers, e.g. -1 means no extra buffer, (-1-N) means N extra buffers.
Set a gratuitous default of -11 (N=10). This is much lower than the
firmware default, which appears to be 96.
This is backwards compatible, but needs a symbol only present in newer
firmware headers. (It's an enum item, so it requires a check in
configure.)
AVX2 support was introduced in Yasm 1.2.0 and NASM 2.10, and the
oldest versions currently supported are Yasm 0.8.0 and NASM 2.03
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
These will be re-merged once it's been fixed properly.
This reverts:
* Commit '8e7bea6dc6ac5b21484774a026847bec0771ab62'
configure: Improve requesting specific features
* Commit 'e93aa2c9e7b3599aee6a5820760fc1a2c629dea0'
configure: Force-enable select_any dependencies only on --enable
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
It dropped the old headers, but the replacements are already available
with opencv 2.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
If links don't work, fall back to using the full source path as was
previously done.
This should fix build failures with MSVC.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fix configure to set DST_PATH to the Windows style path when building with MSVC
Fixes ticket #5180.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Previously the full source path was embedded inconsistently in the debug
information between in-tree/out-of-tree builds.
The 'vpath %.inc' becomes necessary for finding
libavfilter/all_channel_layouts.inc in out-of-tree builds.
The full source path is still embedded in the debug information, but
it's now independent of whether building in-tree or out-of-tree.
The biggest improvement of this patch is that gdb now always searches
for the path relative to the source directory. It still also searches
for the full path.
Previously it searched only for the full path in out-of-tree builds,
making the debug information generated by Debian's buildds rather hard
to use.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Before this patch trying to enable only https by issuing
--disable-protocols --enable-protocol=https --enable-gnutls
does not enable https, and
--disable-all --enable-protocols
does not enable libavformat and the protocols component.
Now the default-enabled options are set after the explicitly
disabled/enabled options are evaluated.
If an explicitly enabled option cannot be enabled configure
will fail printing an error message.
Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.
Requires Kvazaar version 0.8.1.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.
Requires Kvazaar version 0.8.1.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The option became too aggressive with GCC 6, generating nearly 500
warnings from static const variables defined in assorted headers
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
It serves absolutely no purpose other than to confuse potentional
Android developers about how to use hardware acceleration properly
on the the platform. The stagefright "API" is not public, and the
MediaCodec API is the proper way to do this.
Furthermore, stagefright support in avcodec needs a series of
magic incantations and version-specific stuff, such that
using it actually provides downsides compared just using the actual
Android frameworks properly, in that it is a lot more work and confusion
to get it even running. It also leads to a lot of misinformation, like
these sorts of comments (in [1]) that are absolutely incorrect.
[1] http://stackoverflow.com/a/29362353/3115956
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Let's disable the ISAs first, and then the core capabilities, as we do
for the rest of the cores. This way the code is better organized.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Solves an issue that will get triggered when gcc 20 rolls in.
Found-by: Hendrik Leppkes <h.leppkes@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Replaces by real arithmetic. Tested the validity of these transformations separately.
Numerical differences are ~1e-15, and should not matter: it is not even
clear which is more precise mathematically.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
exp10 is a function available in GNU libm. Looks like no other common
libm has it. This adds support for it to FFmpeg.
There are essentially 2 ways of handling the fallback:
1. Using pow(10, x)
2. Using exp2(M_LOG2_10 * x).
First one represents a Pareto improvement, with no speed or accuracy
regression anywhere, but speed improvement limited to GNU libm.
Second one represents a slight accuracy loss (relative error ~ 1e-13)
for non GNU libm. Speedup of > 2x is obtained on non GNU libm platforms,
~30% on GNU libm. These are "average case numbers", another benefit is
the lack of triggering of the well-known terrible worst case paths
through pow.
Based on reviews, second one chosen. Comment added accordingly.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
complex is not available on all platforms. Furthermore, it is trivial to
rewrite complex number expressions to real arithmetic, and in fact
sometimes advantageous for performance reasons: by wrapping as a complex,
one forces a particular Cartesian representation that is not necessarily optimal for the purpose.
Configure dependencies also removed, and aemphasis is now available across
all platforms.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Source code is from Boost:
http://www.boost.org/doc/libs/1_46_1/boost/math/special_functions/erf.hpp
with appropriate modifications for FFmpeg.
Tested on interval -6 to 6 (beyond which it saturates), +/-NAN, +/-INFINITY
under -fsanitize=undefined on clang to test for possible undefined behavior.
This function turns out to actually be essentially as accurate and faster than the
libm (GNU/BSD's/Mac OS X), and I can think of 3 reasons why upstream
does not use this:
1. They are not aware of it.
2. They are concerned about licensing - this applies especially to GNU
libm.
3. They do not know and/or appreciate the benefits of rational
approximations over polynomial approximations. Boost uses them to great
effect, see e.g swr/resample for bessel derived from them, which is also
similarly superior to libm variants.
First, performance.
sample benchmark (clang -O3, Haswell, GNU/Linux):
3e8 values evenly spaced from 0 to 6
time (libm):
./test 13.39s user 0.00s system 100% cpu 13.376 total
time (boost based):
./test 9.20s user 0.00s system 100% cpu 9.190 total
Second, accuracy.
1e8 eval pts from 0 to 6
maxdiff (absolute): 2.2204460492503131e-16
occuring at point where libm erf is correctly rounded, this is not.
Illustration of superior rounding of this function:
arg : 0.83999999999999997
erf : 0.76514271145499457
boost : 0.76514271145499446
real : 0.76514271145499446
i.e libm is actually incorrectly rounded. Note that this is clear from:
https://github.com/JuliaLang/openlibm/blob/master/src/s_erf.c (the Sun
implementation used by both BSD and GNU libm's), where only 1 ulp is
guaranteed.
Reasons it is not easy/worthwhile to create a "correctly rounded"
variant of this function (i.e 0.5ulp):
1. Upstream libm's don't do it anyway, so we can't guarantee this unless
we force this implementation on all platforms. This is not easy, as the
linker would complain unless measures are taken.
2. Nothing in FFmpeg cares or can care about such things, due to the
above and FFmpeg's nature.
3. Creating a correctly rounded function will in practice need some use of long
double/fma. long double, although C89/C90, unfortunately has problems on
ppc. This needs fixing of toolchain flags/configure. In any case this
will be slower for miniscule gain.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
For systems with broken libms.
Tested with NAN, -NAN, INFINITY, -INFINITY, +/-x for regular double x and
combinations of these.
Old versions of MSVC need some UINT64_C hackery.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
arc4random() was designed as a superior interface for system random
number generation, designed for OpenBSD and subsequently incorporated by
other BSD's, Mac OS X, and some non-standard libc's. It is thus an improvement to
use it whenever available.
As a side note, this may or may not get included in glibc, and there is
a proposal to create a posix_random family based on these ideas:
http://austingroupbugs.net/view.php?id=859.
Tested on Mac OS X.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
* commit 'e02de9df4b218bd6e1e927b67fd4075741545688':
lavc: export Dirac parsing API used by the ogg demuxer as public
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Having a configure option with the same name as a MIPS ISA is confusing,
so better to remove it. This option was being used to add some
optimizations to a specific core (i6400). We will add the optimizations
just when the i6400 core has been detected, in a later patch.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Having a configure option with the same name as a MIPS ISA is confusing,
so better to remove it. This option was being used to add some
optimizations to a specific core (p5600). We will add the optimizations
just when the p5600 core has been detected, in a later patch.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This fixes builds with --disable-vda, which previously failed with
undefined references to CVImageBuffer* and CVPixelBuffer* functions.
Signed-off-by: Martin Storsjö <martin@martin.st>
While pr is a valid POSIX.1 command, its usage in configure
is a little borderline and is possible to replace it with
printf.
Bug-Id: 913
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit 'afdff8008149515afebf9992eae84be7d76e6b1e':
configure: Clearly state that MSYS native builds are discouraged
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
MSYS, as per cygwin, by default uses a custom posix abstraction
in the form of a "msys2.dll". Programs build that way are harder to
distribute and use.
MSYS2 provides alternate launcher scripts that provide a MINGW
environment nearly out of box.
It is known that the naive sqrt(x*x + y*y) approach for computing the
hypotenuse suffers from overflow and accuracy issues, see e.g
http://www.johndcook.com/blog/2010/06/02/whats-so-hard-about-finding-a-hypotenuse/.
This adds hypot support to FFmpeg, a C99 function.
On platforms without hypot, this patch does a reaonable workaround, that
although not as accurate as GNU libm, is readable and does not suffer
from the overflow issue. Improvements can be made separately.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This implementation does not support TLS listen sockets and loading
CA/Certs from files.
The Windows API does not support loading PEM certs, and would either
require a manual loader or instead be limited to loading Windows PFX
certificates
TLS listen sockets would have to be implemented quite separately, as many
of the APIs are different for server-mode (as opposed to client mode).
* commit 'a0562e531723923b632684c7b51a9dd584bf534f':
configure: Add a SONAME entry for the android target
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '00b62968d079e63bf22028f253ac297292436ebe':
os_support: Don't try to return the service name as a string in getnameinfo
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '567ca142952c5be57e52c149c815dfe5d6ac6d41':
configure: Add -D_CRT_NONSTDC_NO_WARNINGS when building with msvc
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
In order to load libraries in Android they need to be unversioned.
The android target section was derived from the BSD ones, and they
that simply drop the SONAME
Android M requires to have a SONAME entry but unversioned.
Some systems may be lacking getservbyport; the previous ifdef wasn't
quite enough since it still assumed that struct servent was defined,
as pointed out by Clément Gregoire.
Simply remove the possibility to return non-numeric services in
getnameinfo; no caller of getnameinfo within libavformat
currently try to use getnameinfo for retrieving the port number without
NI_NUMERICSERV, and falling back on getservbyport may be non-threadsafe.
Signed-off-by: Martin Storsjö <martin@martin.st>
This silences warnings like this one:
libavformat/file.c(62) : warning C4996: 'read': The POSIX name for this
item is deprecated. Instead, use the ISO C++ conformant name: _read.
See online help for details.
Signed-off-by: Martin Storsjö <martin@martin.st>
GCC (and Clang) have this useful warning that is not enabled by -Wall or
-Wextra. This will ensure that issues like those fixed in
4da52e3630
will trigger warnings.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Register mmaldec as mpeg2 decoder. Supporting mpeg2 in mmaldec is just a
matter of setting the correct MMAL_ENCODING on the input port. To ease the
addition of further supported mmal codecs a macro is introduced to generate
the decoder and decoder class structs.
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: wm4 <nfxjfg@googlemail.com>
Fixes Ticket4922.
Commit 060102389e broke configure, since
the inversion ! was missed while converting the grep to a case
statement.
Reviewed-by: Nicolas George <george@nsup.org>
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
The versioning facility in the Solaris linker differs from Linux in 3 ways:
1. It does not support globs in linker scripts for
symbol versioning -- this is a GNU extension.
2. The linker argument is '-M', instead of '--version-script'.
3. It is picky about line endings.
Each symbol or directive must be on a line of it's own.
Let's use make_sunver.pl from GCC to generate a version script that works
correctly with the Solaris linker. It's function is to correctly expand the
globs in the original generated version script.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit 'd7a5a178c252b625537adc046392624ad543dea7':
configure: When disabling a library disable all the related components
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
When trying to build the binary dct-test under MSYS2/Win64, the
makefile rule does not have the SUBDIR in the target for its
object file.
Consequently, modifications to various include files (e.g. C ones)
do not trigger a recompilation.
When tracing the dependency generating, the dependency generation
has this strange content (linebreak inserted):
sed -e "/^#.*/d" -e "s,^[[:space:]]*dct\\.o,libavcodec/dct.o," \
> libavcodec/dct-test.d
For some reason, the $(*F) has weird content. It looks simpler to
use $(@F) instead of $(*F)\\.o, although this was tested on one
single version of make.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This way is sufficient to use the component specific configure variable
and not guard against the global library configure variable in code
that is outside it (e.g. checkasm).
Currently, errors are thrown for various macros while building that are completely bogus.
They occur during the dependency (.d) generation phase, and have no bearing on the compiled output,
since only the stdout is piped into the sed command to generate the .d files.
They basically occur as the relevant -I paths are not (and cannot be passed) during
the dependancy generation phase.
As such, this patch silences them.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '678f788fea3380e5cbbf75baac5cc0ce07a56a42':
configure: Set the initial ldflags to match the cflags
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Some gcc-based toolchain would fail to link if the abi set by the
cpuflags does not match the default.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The appropriate flag for HEASLR (--high-entropy-va) was added in
binutils 2.25.
Also set the image base >4GB so higher entropy gets applied to image
base randomization when used with HEASLR (8 -> 17 bits of
randomization). Windows does this for compatibility because of "latent
pointer truncation issues".
Signed-off-by: Alex Smith <alex.smith@warpsharp.info>
There's no reason for it. ASLR will rebase it regardless so "preventing
collisions" isn't really relevant. This also brings it in line with
what a msvc produced dll will have (an image base of 0x10000000).
Signed-off-by: Alex Smith <alex.smith@warpsharp.info>
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
They were added to binutils in the same version so it's safe to combine.
Signed-off-by: Alex Smith <theryuu@warpsharp.info>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Binutils will always strip the relocation information from executable
files even if it needs it (dynamicbase/ASLR). We can work around this
by using the pic-executable flag combined with setting the correct entry
point since apparently ld forgets what that should be. This problem
affects both 32 and 64-bit mingw-w64.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If tput is not found for colorizing, error message should be squashed.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
op== is confusing, as it may easily be mistook for an equality check,
while in reality it is doing an assigment to '='.
This patch has the additional benefit of cleaning up 2 warnings from shellcheck.net.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Should fix compilation with mingw-w64 trunk, where ID3D11VideoDecoder is available
but ID3D11VideoContext still isn't.
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes linking in FFMS and f265 at least, when ffmpeg is compiled with
libsoxr.
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch introduces color warning messages (yellow).
They are enabled whenever available.
Tested with zsh, bash, and sh (bash under --posix).
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Better message that ffplay is not going to be built by printing out what
will be built.
Based on a patch by Moritz Barsnick.
Signed-off-by: rogerdpack <rogerpack2005@gmail.com>
Reviewed-by: Ganesh Ajjanagadde <gajjanag@mit.edu>
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
The wiki, Ticket1464, and Ticket3970 warn about the usage of GCC 4.2.
This fixes Ticket3970.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
grep is not necessary for the functionality.
This avoids an unnecessary fork.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
And update the preference for the newer codecs now that the libraries
seem stable and widespread enough.
Bug-Id: 695
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
grep is not required for the functionality in this instance.
This avoids an unnecessary fork, and also avoids a duplicated dumpversion call.
Furthermore, it also corrects behavior when no minor version number is present, see e.g
https://github.com/joyent/node/pull/25671.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When building SDL with MinGW, it sets -mwindows with the
assumption that the application is a GUI application. If this
is linked without passing -mconsole to configure via
--extra-ldflags, stdout will be silenced from cmd.exe while
running FFmpeg.
The -mwindows flag that causes this behavior is included in the
sdl_libs variable, so append -mconsole there rather than create
an sdl_ldflags case just to insert it (especially if -mconsole
must come *after* -mwindows in order to be effective).
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This filter can be used to scale one stream to match another or based on
another, useful to scale subtitles or other things to be overlayed
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Don't try to detect the float ABI by checking at the toolchain
name or by trying to assemble and link files with eabi_attributes.
This fixes the float ABI detection when building using clang
with -fembed-bitcode, where the current eabi_attributes check
accidentally passes.
This issue was pointed out by James Howe <james.howe@hp.com>.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes compilation with --disable-everything --enable-encoder=mjpeg
While there, clean up some recursive dependencies.
Reported-by: Bernhard Döbler, programmer bardware de
On Xcode's clang on OS X, $cc --version will output a 'Configured with:'
line to stderr, which clobbers the configure script output. As this line
serves no further purpose, it should be silenced.
The same applies to apple-gcc 4.2.1, which complains that it can not
understand the kernel version it is running on.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
On Xcode's clang on OS X, $cc --version will output a 'Configured with:'
line to stderr, which clobbers the configure script output. As this line
serves no further purpose, it should be silenced.
The same applies to apple-gcc 4.2.1, which complains that it can not
understand the kernel version it is running on.
Reviewed-by: Carl Eugen Hoyos <cehoyos@ag.or.at>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'c6e0829e3696c894d24c8088c3ee30a9c17534c2':
configure: Don't force _WIN32_WINNT to an older version if targeting winphone/winrt
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'd75b55635a02444c2f188c26e431a1cec992babe':
dxva2/d3d11va: Set _WIN32_WINNT to 0x0602 instead of 0x0600
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This avoids having to manually set _WIN32_WINNT in --extra-cflags
when targeting these API families, which only was necessary to
work around configure setting _WIN32_WINNT to an older version
by default.
Signed-off-by: Martin Storsjö <martin@martin.st>
If _WIN32_WINNT is unset, we force it to a new enough value to
make sure the necessary definitions are visible.
When targeting Windows Phone or Windows RT, _WIN32_WINNT should
be at least 0x0602 - otherwise the windows headers themselves
can cause errors (which technically are bugs in the headers).
Raising this value here shouldn't hurt; the alternative would
be to not touch it at all if WINAPI_FAMILY is set to phone/app,
or to force setting it to 0x0602 in configure if unset (for phone/app).
Signed-off-by: Martin Storsjö <martin@martin.st>
This macro identifies whether VFPv3 is available; MSVC defaults
to hardfloat (except for older MSVC versions for CE, targeting
ARMv4).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '60a21b3d81c1a11cf5a08950eadd4e84ca2e597c':
configure: Check for _M_ARMT to detect thumb when using MSVC
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '2192ff84dd720968108bc1ca54e239f4c94eb61d':
configure: Default to armasm for --toolchain=msvc when targeting arm
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '342b0ba5f93b09b1d0c2597db44605300e6fcc53':
configure: Only redirect strtoll to _strtoi64 if necessary
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '5fd553d31272d5ed42a7a5a0ecaab7b3452da83a':
configure: Only redefine inline to __inline for msvc if necessary
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '0cff125200ab53fa3ae70d85b4f614f269fe3426':
configure: Only add -FIstdlib.h for msvc/icl if necessary
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
The struct definitions in dxva.h, which are necessary in order to
actually use d3d11va, are hidden when WINAPI_FAMILY targets Windows Phone
or WindowsRT.
Building with WINAPI_FAMILY=WINAPI_FAMILY_DESKTOP_APP is disallowed
when targeting ARM. ("Compiling Desktop applications for the ARM
platform is not supported.") So we set _CRT_BUILD_DESKTOP_APP to 0
to tell the runtime not to detect some issues with this mismatching.
The same tweaks to detect if the API is available is done in dxva2_internal.h
when compiling each DXVA2/D3D11VA decoders.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is only necessary on MSVC 2010/2012 (and possibly on some
ICL versions). This both avoids an extra hack on newer MSVC
versions, and better documents what the extra compiler option
is used for.
Signed-off-by: Martin Storsjö <martin@martin.st>
The struct definitions in dxva.h, which are necessary in order to
actually use d3d11va, are hidden when WINAPI_FAMILY targets Windows Phone
or WindowsRT.
Building with WINAPI_FAMILY=WINAPI_FAMILY_DESKTOP_APP is disallowed
when targeting ARM. ("Compiling Desktop applications for the ARM
platform is not supported.") So we set _CRT_BUILD_DESKTOP_APP to 0
to tell the runtime not to detect some issues with this mismatching.
The same tweaks to detect if the API is available is done in dxva2_internal.h
when compiling each DXVA2/D3D11VA decoders.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'bf52f773913cf74bdf0d2c8c2cb4473fa1b7801e':
lavc: add Intel libmfx-based MPEG2 decoder.
Conflicts:
configure
libavcodec/qsvdec_mpeg2.c
Some cosmetics merged, rest is related to the removed parser code and
thus not merged
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Otherwise it would get translated like a library path (-L option),
which breaks setting the flag.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
favor link over link.exe in case some wrapper script already exists
fallback to "link" in the path if the one next to cl is not found
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'a54e720e0289433d6bc3f7ba0a37fa5cabfaeea9':
configure: force -nologo- when detecting MSVC
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
The -nologo- option is the inverse of -nologo, reenabling printing the
"logo" version header. This is useful if the compiler actually is a
wrapper that forces -nologo.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'e1319aa1c1be9b64117c19170344fb78841dd67c':
libx264: Add support for the MPEG2 encoder
Conflicts:
configure
libavcodec/Makefile
libavcodec/libx264.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
