This filter is designed to parse embedded ICC profiles and attempt
extracting colorspace tags from them, updating the AVFrame metadata
accordingly.
This is intentionally made a separate filter, rather than being part of
libavcodec itself, so that it's an opt-in behavior for the time being.
This also gives the user more flexibility to e.g. first attach an ICC
profile and then also set the colorspace tags from it.
This makes #9673 possible, though not automatic.
Signed-off-by: Niklas Haas <git@haasn.dev>
This filter is designed to specifically cover the task of generating ICC
profiles (and attaching them to output frames) on demand. Other tasks,
such as ICC profile loading/stripping, or ICC profile application, are
better left to separate filters (or included into e.g. vf_setparams).
Signed-off-by: Niklas Haas <git@haasn.dev>
This introduces an optional dependency on lcms2 into FFmpeg. lcms2 is a
widely used library for ICC profile handling, which apart from being
used in almost all major image processing programs and video players,
has also been deployed in browsers. As such, it's both widely available
and well-tested.
Add a few helpers to cover our major use cases. This commit merely
introduces the helpers (and configure check), even though nothing uses
them yet.
It's worth pointing out that the reason the cmsToneCurves for each
AVCOL_TRC are cached inside the context, is because constructing a
cmsToneCurve requires evaluating the curve at 4096 (by default) grid
points and constructing a LUT. So, we ideally only want to do this once
per curve. This matters for e.g. ff_icc_profile_detect_transfer, which
essentially compares a profile against all of these generated LUTs.
Re-generating the LUTs for every iteration would be unnecessarily
wasteful.
The same consideration does not apply to e.g. cmsCreate*Profile, which
is a very lightweight operation just involving struct allocation and
setting a few pointers.
The cutoff value of 0.01 was determined by experimentation. The lowest
"false positive" delta I saw in practice was 0.13, and the largest
"false negative" delta was 0.0008. So a value of 0.01 sits comfortaby
almost exactly in the middle.
Signed-off-by: Niklas Haas <git@haasn.dev>
Related to #9673, this helper exists to facilitate "guessing" the right
primary tags from a given set of raw primary coefficients.
The cutoff value of 0.001 was chosen by experimentation. The smallest
"false positive" delta observed in practice was 0.023329, while the
largest "false negative" delta was 0.00016. So, a value of 0.001 sits
comfortably in the middle.
Signed-off-by: Niklas Haas <git@haasn.dev>
These are needed beyond just vf_colorspace, so give them a new home in
colorspace.h.
In addition to moving code around, also merge the white point and
primary coefficients into a single struct to slightly increase the
convenience and shrink the size of the new API by avoiding the need
to introduce an extra function just to look up the white point as well.
The only place the distinction matters is in a single enum comparison,
which can just as well be a single memcpy - the difference is
negligible.
Signed-off-by: Niklas Haas <git@haasn.dev>
The lensfun filter, at present, loads its database from a path hardcoded
at build time. This may not be known or available to end users.
Added option db_path allows custom path.
This makes the filters match their declaration in
libavfilter/allfilters.c; the earlier discrepancy was btw UB.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Calculate Spatial Info (SI) and Temporal Info (TI) scores for a video, as defined
in ITU-T P.910: Subjective video quality assessment methods for multimedia
applications.
Upstream gained a new tone-mapping API, which we never switched to. We
don't need a version bump for this because it was included as part of
the v4.192 release we currently already depend on.
Some of the old options can be moderately approximated with the new API,
but specifically "desaturation_base" and "max_boost" cannot. Remove
these entirely, rather than deprecating them. They have actually been
non-functional for a while as a result of the upstream deprecation.
Signed-off-by: Niklas Haas <git@haasn.dev>
av_buffersrc_parameters_set() can be called to set paramenters after the filter
was initialized with for example avfilter_graph_create_filter().
Signed-off-by: James Almer <jamrial@gmail.com>
All FF_QSCALE_TYPE values used by libavfilter originate
from libavfilter (namely from ff_qp_table_extract());
no value is exchanged between libavcodec and libavutil.
The values that are exchanged (and used in libavfilter)
are of type enum AVVideoEncParamsType.
Therefore this patch stops using said FF_QSCALE_TYPE_*
in libavfilter and uses enum AVVideoEncParamsType
directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Due to a quirk of the ASS format some tags depend on the exact storage
resolution of the video, so tell libass via ass_set_storage_size.
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This avoids unnecessary churn and build breakage for users, by
making sure the whole version.h is included like it has been so far,
while keeping the benefit of not needing to rebuild most files in
the ffmpeg tree on minor/micro bumps.
Signed-off-by: Martin Storsjö <martin@martin.st>
Output buffer alignment might be different to ZIMG_ALIGNMENT or it may not be
aligned at all if a downstream filter (e.g. vf_pad) intentionally misaligns it.
Or maybe we should unconditionally always allocate output with
av_frame_get_buffer() instead of ff_get_video_buffer()?
Signed-off-by: Marton Balint <cus@passwd.hu>
Make sure it is between [1, MAX_THERADS] and also take into account the outlink
size in order not to request zero height output from zscale.
Signed-off-by: Marton Balint <cus@passwd.hu>
This avoids unnecessary rebuilds of most source files if only the
list of enabled components has changed, but not the other properties
of the build, set in config.h.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also bump the minor versions of all libraries, to signify the
API change of splitting the version.h headers and adding the
new version_major.h header.
Signed-off-by: Martin Storsjö <martin@martin.st>
Reported by ASAN as memcpy-param-overlap when running
the filter-join FATE-test.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In libavfilter/vf_palettegen.c, the function get_avg_color requires
that box->len greater than zero to avoid dividing by zero. However,
the call sequence filter_frame -> get_palette_frame -> get_avg_color
may not satisfy this precondition. Fixes#9222.
Signed-off-by: Yiyuan GUO <yguoaz@gmail.com>
This patch removes all occurences of DNNReturnType from the DNN module.
This commit replaces DNN_SUCCESS by 0 (essentially the same), so the
functions with DNNReturnType now return 0 in case of success, the negative
values otherwise.
Signed-off-by: Shubhanshu Saxena <shubhanshu.e01@gmail.com>
Signed-off-by: Shubhanshu Saxena <shubhanshu.e01@gmail.com>
Switch to returning specific error codes or DNN_GENERIC_ERROR
when an error is encountered in the common DNN backend functions.
Signed-off-by: Shubhanshu Saxena <shubhanshu.e01@gmail.com>
Switch to returning specific error codes or DNN_GENERIC_ERROR
when an error is encountered.
Signed-off-by: Shubhanshu Saxena <shubhanshu.e01@gmail.com>
Switch to returning specific error codes or DNN_GENERIC_ERROR
when an error is encountered. For TensorFlow C API errors, currently
DNN_GENERIC_ERROR is returned.
Signed-off-by: Shubhanshu Saxena <shubhanshu.e01@gmail.com>
Switch to returning specific error codes or DNN_GENERIC_ERROR
when an error is encountered. For OpenVINO API errors, currently
DNN_GENERIC_ERROR is returned.
Signed-off-by: Shubhanshu Saxena <shubhanshu.e01@gmail.com>
This commit returns specific error codes from the functions in the
dnn_io_proc instead of DNN_ERROR.
Signed-off-by: Shubhanshu Saxena <shubhanshu.e01@gmail.com>
This commit returns specific error codes from the execution
functions in the Native Backend layers instead of DNN_ERROR.
Signed-off-by: Shubhanshu Saxena <shubhanshu.e01@gmail.com>
This commit prepares the filter side to handle specific error codes
from the DNN backends instead of current DNN_ERROR.
Signed-off-by: Shubhanshu Saxena <shubhanshu.e01@gmail.com>
