Added VDPAU to list of supported formats for VP9 420 10 and 12 bit
formats. Add VP9 10/12 Bit support for VDPAU
Signed-off-by: Philip Langdale <philipl@overt.org>
The manual states "there is virtually no reason to use that encoder.".
It supports less sample formats than the native encoder, is less efficient
than the native encoder and is also slower and pretty much remains untested.
libwavpack also isn't being fuzzed, which given that we plug the parameters
without any sanitizing them looks concerning.
AV1 decoder is supported on Tiger Lake+ platforms since libmfx 1.34
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Signed-off-by: Zhong Li <zhongli_dev@126.com>
Used in FMVs for FX Fighter and Croc. Supports BVID and BASF streams,
requests samples for anything else.
Due to the way BASF streams are contained in the file, only one is
supported. I have yet to see a BRP file with multiple.
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
This AV1 decoder is currently only used for hardware accelerated decoding.
It can be extended into a native decoder in the future, so set its name to
"av1" and temporarily give it the lowest priority in the codec list.
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Added VDPAU to list of supported formats for HEVC10 and 12 bit formats
also added 42010 bit to surface_parameters and new VDP chroma formats to
VDPAUPixFmtMaps
Add HEVC 420 10/12 Bit and 444 10/12 Bit support for VDPAU
YUV444P10 is defined as the 444 surface with 10bit valid data in LSBs
but H/w returns Data in MSBs Hence if we map output as YUV444p16 it
is filtering out the LSB to convert to p10 format.
Signed-off-by: Philip Langdale <philipl@overt.org>
This contains encoder wrappers for H264, HEVC, AAC, AC3 and MP3.
This is based on top of an original patch by wm4
<nfxjfg@googlemail.com>. The original patch supported both encoding
and decoding, but this patch only includes encoding.
The patch contains further changes by Paweł Wegner
<pawel.wegner95@gmail.com> (primarily for splitting out the encoding
parts of the original patch) and further cleanup, build compatibility
fixes and tweaks for use with Qualcomm encoders by Martin Storsjö.
Signed-off-by: Martin Storsjö <martin@martin.st>
AviSynth+ now supports non-Windows OSes, making AvxSynth
obsolete. Since we no longer support AviSynth 2.5 (which is
essentially what AvxSynth is), remove AvxSynth support and
replace it with AviSynth+.
As a result, the USING_AVISYNTH defines can be switched back
to generic _WIN32.
Supports connecting to a RabbitMQ broker via AMQP version 0-9-1.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This adds a decoder for Broderbund's sprite-based QuickTime CDToons
codec, based on the decoder I wrote for ScummVM.
Signed-off-by: Alyssa Milburn <amilburn@zall.org>
Adds support for the custom ASF container used by some Argonaut Games'
games, such as 'Croc! Legend of the Gobbos', and 'Croc 2'.
Can also handle the sample files in:
https://samples.ffmpeg.org/game-formats/brender/part2.zip
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
Adds support for the ADPCM variant used by some Argonaut Games' games,
such as 'Croc! Legend of the Gobbos', and 'Croc 2'.
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
This BSF takes Temporal Units split across different AVPackets and merges them
by looking for Temporal Delimiter OBUs.
Signed-off-by: James Almer <jamrial@gmail.com>
1. must enable low_power mode since just VDENC can be supported by iHD
driver right now
2. Coding option1 and extra_data are not supported by MSDK
3. IVF header will be inserted in MSDK by default, but it is not needed
for FFmpeg, so disable it.
Signed-off-by: Zhong Li <zhongli_dev@126.com>
Support for VDPAU accelerated VP9 decoding was added with libvdpau-1.3.
Support for the same in ffmpeg is added with this patch. Profiles
related to VDPAU VP9 can be found in latest vdpau.h present in
libvdpau-1.3. DRC clips are not supported yet due to
http://trac.ffmpeg.org/ticket/8068
Add VP9 VDPAU to list of hwaccels and supported formats
Added file vdpau_vp9.c and Modified configure to add VDPAU VP9 support.
Mapped VP9 profiles to VDPAU VP9 profiles. Populated the codec specific
params that need to be passed to VDPAU.
Signed-off-by: Philip Langdale <philipl@overt.org>
Implemented as a variant of the hash muxer, reusing most functions,
and making use of the previously introduced array of hashes.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When ffmpeg was streaming, multiple clients were only supported by using a
multicast destination address. An alternative was to stream to a server which
re-distributes the content. This commit adds ZeroMQ as a protocol, which allows
multiple clients to connect to a single ffmpeg instance.
Signed-off-by: Marton Balint <cus@passwd.hu>
Added linux support for amf encoder through vulkan.
To use h.264(AMD VCE) encoder on linux amdgru-pro version 19.20+ and
amf-amdgpu-pro package(amdgru-pro contains, but does not install
automatically) are required.
This driver can be installed using amdgpu-pro-install script in
official amd driver archive.
Initialization of amf encoder occurs in this order:
1) trying to initialize through dx11(only windows)
2) trying to initialize through dx9(only windows)
3) trying to initialize through vulkan
Only Vulkan initialization available on linux.
This avoids using the CUDA SDK at all; instead, we provide a minimal
reimplementation of the basic functionality that lavfi actually uses.
It generates very similar code to what NVCC produces.
The header contains no implementation code derived from the SDK.
The function and type declarations are derived from the SDK only to the
extent required to build a compatible implementation. This is generally
accepted to qualify as fair use.
Because this option does not require the proprietary SDK, it does not require
the "--enable-nonfree" flag in configure.
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
The latest generation video decoder on the Turing chips supports
decoding HEVC 4:4:4. This change adds AV_PIX_FMT_VDPAU as a valid format
for HEVC 4:4:4 8 bit.
Fixes ticket #4519.
The metadata starting at 0xe00004 is encrypted
with the password "meta" but zlib does not
support decryption, so no kux metadata is read.
* Outputs ASS lines with basic coloring and font scaling for each
given region.
* Sets the default style to the resolution of the subtitle plane
(for example, 960x540 / 36pt font for profile A).
* Has options to:
* Disable ruby text (which is coded as regions which have
half-height text in libaribb24).
Enabled by default as without positioning ruby text only
confuses as it is usually coded in the beginning of the decoded
subtitle line.
* Set the working directory, in which libaribb24 will read
configuration as well as into which it may save broadcast extra
symbols as PNG.
Unset by default.
The unconventional library check can be explained by the library's
current master branch being licensed as LGPLv3, but at the time of
writing the latest official release is still licensed under GPLv3.
Thus, one either has to wait for the following release, or enable
GPLv3.
