Add transform_skip option to hevc_qsv. By enabling this option,
the transform_skip_enabled_flag in PPS will be set to 1.
This option is supported on the platform equal or newer than ICL.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Add low latency P-pyramid support to qsv. This feature relates to
command line option "-p_strategy". To enable this flag, user also
need to set "-bf" to 0. P-strategy has two modes "1-simple" and
"2-pyramid". The details of the two models refer to
https://github.com/Intel-Media-SDK/MediaSDK/blob/master/doc/mediasdk-man.md#preftype
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Add dblk_idc option to 264_qsv and hevc_qsv. Turining on this opion can
disable deblocking.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Add max_frame_size support to hevc_qsv as well.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The SDK may insert picture timing SEI for hevc and the code to set mfx
parameter has been added in qsvenc, however the corresponding option is
missing in the hevc option array
Reviewed-by: Limin Wang <lance.lmwang@gmail.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Overlay one video on the top of another.
It takes two inputs and has one output. The first input is the "main" video on
which the second input is overlaid. This filter requires same memory layout for
all the inputs.
An example command to use this filter to overlay overlay.mp4 at the top-left
corner of the main.mp4:
ffmpeg -init_hw_device vaapi=foo:/dev/dri/renderD128 \
-hwaccel vaapi -hwaccel_device foo -hwaccel_output_format vaapi -c:v h264 -i main.mp4 \
-hwaccel vaapi -hwaccel_device foo -hwaccel_output_format vaapi -c:v h264 -i overlay.mp4 \
-filter_complex "[0:v][1:v]overlay_vaapi=0:0:100💯0.5[t1]" \
-map "[t1]" -an -c:v h264_vaapi -y out_vaapi.mp4
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Zachary Zhou <zachary.zhou@intel.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
This is similar to the faststart option of the mov muxer, yet
in contrast to it it works together with reserve_index_space
(the equivalent to reserved_moov_size): If the reserved space
does not suffice, the data is shifted; if not, the Cues are
written at the front without shifting the data.
Several tests that cover (not only) this have been added.
Implements #7017.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In order to be able to extend this struct later (as the Dolby Vision RPU
evolves), all of the 'container' structs are considered extensible, and
the individual constituent fields must instead be accessed via offsets.
The precedent for this style of access is set in
<libavutil/detection_bbox.h>
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Users may take the description literally which leads to inverted
results.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Reviewed-by: Jun Zhao <barryjzhao@tencent.com
Very high stts sample deltas may occasionally be intended but usually
they are written in error or used to store a negative value for dts correction
when treated as signed 32-bit integers.
This option lets the user set an upper limit, beyond which the delta is clamped to 1.
Values greater than the limit if negative when cast to int32 are used to adjust onward dts.
Unit is the track time scale. Default is UINT_MAX - 48000*10 which
allows upto a 10 second dts correction for 48 kHz audio streams while
accommodating 99.9% of uint32 range.
Signed-off-by: Gyan Doshi <ffmpeg@gyani.pro>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Most of user data unregistered SEIs are privated data which defined by user/
encoder. currently, the user data unregistered SEIs found in input are forwarded
as side-data to encoders directly, it'll cause the reencoded output including some
useless UDU SEIs.
I prefer to add one option to enable/disable it and default is off after I saw
the patch by Andreas Rheinhardt:
https://patchwork.ffmpeg.org/project/ffmpeg/patch/AM7PR03MB66607C2DB65E1AD49D975CF18F7B9@AM7PR03MB6660.eurprd03.prod.outlook.com/
How to test by cli:
ffmpeg -y -f lavfi -i testsrc -c:v libx264 -frames:v 1 a.ts
ffmpeg -y -i a.ts -c:v libx264 -udu_sei 1 b.ts
ffmpeg -y -i a.ts -c:v libx264 -udu_sei 0 c.ts
# check the user data unregistered SEIs, you'll see two UDU SEIs for b.ts.
# and mediainfo will show with wrong encoding setting info
ffmpeg -i b.ts -vf showinfo -f null -
ffmpeg -i c.ts -vf showinfo -f null -
This fixes tickets #9500 and #9557.
Reviewed-by: "zhilizhao(赵志立)" <quinkblack@foxmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
The dshow avdevice ignores timestamps for video frames provided by the
DirectShow device, instead using wallclock time, apparently because the
implementer of this code had a device that provided unreliable
timestamps. Me (and others) would like to use the device's timestamps.
The new use_video_device_timestamps option for dshow device enables them
to do so. Since the majority of video devices out there probably provide
fine timestamps, this patch sets the default to using the device
timestamps, which means best fidelity timestamps are used by default.
Using the new option, the user can switch this off and revert to the old
behavior, so a fall back remains available in case the device provides
broken timestamps.
add use_video_device_timestamps to docs.
Closes: #8620
Signed-off-by: Diederick Niehorster <dcnieho@gmail.com>
Reviewed-by: Roger Pack <rogerdpack2@gmail.com>
Because the hls_ts_options will be misunderstand by user,
and then user can use hls_segment_options instead of hls_ts_options.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Because the hls_ts_options will be misunderstand by user that only can
be used in mpegts segments option. So add this option for segments.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Otherwise there is no way to detect an error returned by avio_close() because
ff_format_io_close cannot get the return value.
Checking the return value of the close function is important in order to check
if all data was successfully written and the underlying close() operation was
successful.
It can also be useful even for read mode because it can return any pending
AVIOContext error, so the user don't have to manually check AVIOContext->error.
In order to still support if the user overrides io_close, the generic code only
uses io_close2 if io_close is either NULL or the default io_close callback.
Signed-off-by: Marton Balint <cus@passwd.hu>
Treat values returned from av_dict_get() as const, since they are
internal to AVDictionary.
Signed-off-by: Chad Fraleigh <chadf@triularity.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently, the code doing this is spread over several places and may
behave in unexpected ways. E.g. automatic 'default' marking is only done
for streams fed by complex filtergraphs. It is also applied in the order
in which the output streams are initialized, which is effectively
random.
Move processing the dispositions at the end of open_output_file(), when
we already have all the necessary information.
Apply the automatic default marking only if no explicit -disposition
options were supplied by the user, and apply it to the first stream of
each type (excluding attached pics) when there is more than one stream
of that type and no default markings were copied from the input streams.
Explicitly document the new behavior.
Changes the results of some tests, where the output file gets a default
disposition, while it previously did not.
Unfortunately pad_len and pad_dur behaviour was different if 0 was specified,
pad_dur handled 0 duration as infinity, for pad_len, infinity was -1.
Let's make the behaviour consistent by handling 0 duration for pad_dur and
whole_dur as indeed 0 duration. This somewhat changes the behaviour of the
filter if 0 was explicitly specified, but deprecating the old option and adding
a new for the corrected behaviour seemed a bit overkill. So let's document the
change instead.
Signed-off-by: Marton Balint <cus@passwd.hu>
Since texinfo 6.8, there's no longer an INLINE_CONTENTS variable.
makeinfo: warning: set_from_init_file: unknown variable INLINE_CONTENTS
texinfo commit 62a6adfb33b006e187483779974bbd45f0f782b1 replaced
INLINE_CONTENTS with OUTPUT_CONTENTS_LOCATION.
texinfo commit 41f8ed4eb42bf6daa7df7007afd946875597452d replaced
OUTPUT_CONTENTS_LOCATION with CONTENTS_OUTPUT_LOCATION.
With texinfo 6.8 and above, the same as INLINE_CONTENTS=1 could be
achieved by CONTENTS_OUTPUT_LOCATION=inline.
https://www.gnu.org/software/texinfo/manual/texinfo/html_node/HTML-Customization-Variables.html
Since texinfo commit 6a5ceab6a48a4f052baad9f3474d741428409fd7, the
formatting functions, in particular begin_file, program_string and
end_file, are prefixed with format_, i.e. format_begin_file, etc.
This patch fixes building the documentation when texinfo 6.8, or
above, is used:
Unknown formatting type begin_file
at /usr/bin/makeinfo line 415.
Unknown formatting type program_string
at /usr/bin/makeinfo line 415.
Unknown formatting type end_file
at /usr/bin/makeinfo line 415.
Try to make the feature easier to use, especially since the user
have enabled -strict experimental manually. The user shouldn't
be surprised that hls_playlist is enabled for lhls automatically,
so change the log level from warning to info for that.
Such fields can be seen as generally useful in cases where the
API user is not implementing custom AVIO callbacks, but still would
like to know if data is being read or written out, such as in case
data is being read from input but no AVPacket has been received yet.
Originally added as a private entry in commit
3f75e5116b, but its grouping with
the comment noting its private state was missed during merging of
the field from Libav (most likely due to an already existing field
in between).
The new format (given in big/little endian forms) matches the
existing X2RGB10 format, except with B and R channels switched.
AV_PIX_FMT_X2BGR10 data often is created by OpenGL programs
whose buffers use the GL_RGB10 internal format.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It does the same as av_calloc(), so one of them should be removed.
Given that av_calloc() has the shorter name, it is retained.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Unused since 1f63665ca5.
Found-by: Soft Works <softworkz@hotmail.com>
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is supported only by a few decoders (h263, h263p, mpeg(1|2|)video
and mpeg4) and is entirely redundant with parsers. Furthermore, using
it leads to missing frames, as flushing the decoder at the end does not
work properly.
Co-authored-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Microsoft VideoProcessor requires texture with D3DUSAGE_RENDERTARGET flag as output.
There is no way to allocate array of textures with D3D11_BIND_RENDER_TARGET flag
and .ArraySize > 2 by ID3D11Device_CreateTexture2D due to the Microsoft limitation.
Adding AVD3D11FrameDescriptors array to store array of single textures
instead of texture with multiple slices resolves this.
Signed-off-by: Artem Galin <artem.galin@intel.com>
UPD: Rebase of last patch set over current master and use DX9 as default device type.
Makes selection of dxva2/DX9 device type by default as before with explicit d3d11va/DX11 usage to cover more HW configurations.
Added warning message to expect changing default device type in the future.
Fixes TGL / AV1 decode as requires DX11 with explicit DX11 type
selection.
Add headless/multi adapter support and fixes:
https://trac.ffmpeg.org/ticket/7511https://trac.ffmpeg.org/ticket/6827http://ffmpeg.org/pipermail/ffmpeg-trac/2017-November/041901.htmlhttps://trac.ffmpeg.org/ticket/7933338fbcd5bbhttps://github.com/jellyfin/jellyfin/issues/2626#issuecomment-602153952
Any other fixes are welcome including OpenCL interop patch since I don't have proper setup to validate this use case
Decoding, encoding, transcoding have been validated.
child_device_type option is responsible for d3d11va/dxva2 device selection
Usage examples:
DirectX 11:
-init_hw_device qsv:hw,child_device_type=d3d11va
-init_hw_device qsv:hw,child_device_type=d3d11va,child_device=0
OR
-init_hw_device d3d11va=dx -init_hw_device qsv@dx
DirectX 9 is still supported but requires explicit selection:
-init_hw_device qsv:hw,child_device_type=dxva2
OR
-init_hw_device dxva2=dx -init_hw_device qsv@dx
Signed-off-by: Artem Galin <artem.galin@intel.com>
ff_pnm_parser and ff_vp3_parser already hit the current limit;
an addition to the former (to handle pfm) is planned.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Implements a gray world color correction algorithm
using a log scale LAB colorspace.
Signed-off-by: Paul Buxton <paulbuxton.mail@googlemail.com>
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Remove async flag from filter's perspective after the unification
of async and sync modes in the DNN backend.
Signed-off-by: Shubhanshu Saxena <shubhanshu.e01@gmail.com>
