When editing a commit, the index of the current commit can change; for example,
when merge commits are involved, or when working with stacked branches where
"update-ref" commands may be added above the selected commit.
Reselect the current commit after pressing "e"; this requires doing the refresh
blocking on the main thread. (Another option that I considered was to use a
SYNC refresh, and then select the new line with an OnUIThread inside the Then
function. This also works, but results in a very visible lag.)
Only do this when an onSwitchToEditor function is actually provided. For the
"Move patch into new commit" command we don't, because it isn't totally
straightforward in that case.
This is useful for when you begin to type the message in lazygit's commit panel,
and then realize that you'd rather use your editor's more powerful editing
capabilities. Pressing <c-o> will take you right there.
When navigating in the commits view to a line that is out of view (e.g. by
pressing , or . to scroll by page, or < or > to scroll to the top or bottom),
the commit graph was not correctly highlighted. Fix this by rerendering the
viewport in this case.
It determines the yellow/red status by getting the merge-base between the
current branch and its upstream; while we're rebasing, the current branch is
HEAD, so it tried to get the merge-base between HEAD and HEAD{u}, which doesn't
work. Fix this by passing the name of the checked-out branch separately.
Previously, when pressing right-arrow when the cursor is already in the last
hunk, it would jump back to the beginning of that hunk. This can be confusing if
the hunk is long, maybe the start of the hunk is already scrolled off the top of
the window, and then pressing right-arrow actually scrolls *backwards*, which is
counter-intuitive. It's better to do nothing in this case.
Same for left-arrow when the cursor is already in the first hunk, although here
the problem is not so severe (unless diff context was increased by a huge
amount, and the start of the first hunk is scrolled off the bottom of the
window).
Previously, the current line was only moved as much as necessary so that it's in
view again. This had the problem that when jumping downwards from hunk to hunk
with the right-arrow key, only the first line of the new hunk was shown at the
bottom of the window. I prefer to put the selected line in the middle of the
view in this case, so that I can see more of the newly selected hunk.
This has the consequence that when scrolling through the view line by line using
down-arrow, the view jumps by half a screen whenever I reach the bottom. I can
see how some users might be opposed to this change, but I happen to like it too,
because it allows me to see more context of what's ahead.
This also fixes a bug where after the rebase each commit in the commits view had a tick against it because we hadn't
refreshed the view since the base commit was no longer marked
If the command used by OSCommand.OpenLink fails, lazygit crashes. With this change, if the OpenLink command fails, lazygit just shows a dialog inviting the user to visit the relevant URL.
Fixes#2882
This was on oversight on my part: I assumed that the --work-tree arg was
always intended for use with linked worktrees which have a .git file
pointing back to the repo.
I'm honestly confused now: seems like there are three kinds of worktrees:
* the main worktree of a non-bare repo
* a linked worktree (with its own gitdir in the repo's worktrees/ dir)
* a random folder which you specify as a worktree with the --work-tree arg
I'm pretty sure the --work-tree arg is only intended to be used with this
third kind or workree
... and import stefanhaller's tcell fork for real rather than just replacing it
This solves the problem that people trying to
"go install github.com/jesseduffield/lazygit@latest" would get the error
go: github.com/jesseduffield/lazygit@latest (in github.com/jesseduffield/lazygit@v0.40.0):
The go.mod file for the module providing named packages contains one or
more replace directives. It must not contain directives that would cause
it to be interpreted differently than if it were the main module.
The proper fix is to actually have these two functions share code,
or for views to be able to manage their own heights based on their contents.
But I want to get this out for the sake of a Lazygit Anniversary release.
Now that we refresh upon focus, we can scrap this file watching code.
Stefan says few git UIs use file watching, and I understand why: the
reason this code was problematic in the first place is that watching
files is expensive and if you have too many open file handles that
can cause problems.
Importantly: this code that's being removed was _already_ dead.
When opening lazygit with `lazygit log` the worktrees view was appearing in front of the files view.
This is because it had higher precedence than the files view in the ordered view mapping, and
that was because it originally was in the branches window so it was further down the list.
The reason this didn't cause issues on typical startup is that the files context is activated at the
start so it is brought to the front.
I've been thinking about this for a while: I think it looks really cool if nuking your working tree
actually results in a nuke animation.
So I've added an opt-out config for it
This allows to do the equivalent of "git rebase --onto <target> <base>", by
first marking the <base> commit with the new command, and then selecting the
target branch and invoking the usual rebase command there.
We are in the outsideFilterModeBindings section here; all of these handlers are
wrapped in a OutsideFilterMode guard in a loop below. No need to add one
manually here.
It's tricky to get this right for reflog commits wrt what's the current branch
for each one; so just disable it entirely here, it's probably not something
anybody needs here.
We want to mark all local branch heads with a "*" in the local commits panel, to
make it easier to see how branches are stacked onto each other. In order to not
confuse users with "*" markers that they don't understand, do this only for the
case where users actually use stacked branches; those users are likely not going
to be confused by the display. This means we want to filter out a few branch
heads that shouldn't get the marker: the current branch, any main branch, and
any old branch that has been merged to master already.
The model will be used for logic, so the full hash is needed there; a shortened
hash of 8 characters might be too short to be unique in very large repos. If
some view wants to display a shortened hash, it should truncate it at
presentation time.
We've been sometimes using lo and sometimes using my slices package, and we need to pick one
for consistency. Lo is more extensive and better maintained so we're going with that.
My slices package was a superset of go's own slices package so in some places I've just used
the official one (the methods were just wrappers anyway).
I've also moved the remaining methods into the utils package.
In the presentation layer, when showing branches, we'll show worktrees against branches if they're
associated. But there was a race condition: if the worktree model was refreshed after the branches model,
it wouldn't be used in the presentation layer when it came time to render the branches.
A better solution would be to have some way of signalling that a particular context needs to be refreshed
and after all the models are done being refreshed, we then refresh the contexts. This will prevent
double-renders
When switching worktrees (which we can now do via the branch view) we re-layout the windows and their views.
We had the worktree view ahead of the file view based on the Flatten() method in context.go, because it used
to be associated with the branches panel.
We want to be using forward slashes everywhere internally, so if we get a path from windows
we should immediately convert it to use forward slashes.
I'm leaving out the recent repos list because that would require a migration
There are quite a few paths you might want to get e.g. the repo's path, the worktree's path,
the repo's git dir path, the worktree's git dir path. I want these all obtained once and
then used when needed rather than having to have IO whenever we need them. This is not so
much about reducing time spent on IO as it is about not having to care about errors every time
we want a path.
We now always re-use the state of the repo if we're returning to it, and we always reset the windows to their default tabs.
We reset to default tabs because it's easy to implement. If people want to:
* have tab states be retained when switching
* have tab states specific to the current repo retained when switching back
Then we'll need to revisit this
Older versions of git don't support the -z flag in `git worktree list`.
So we're using newlines.
Also, we're not raising an error upon error because that triggers another refresh,
which gets us into an infinite loop
For marking as good or bad, the current commit is pretty much always the one you
want to mark, not the selected. It's different for skipping; sometimes you know
already that a certain commit doesn't compile, for example, so you might
navigate there and mark it as skipped. So in the case that the current commit is
not the selected one, we now offer two separate menu entries for skipping, one
for the current commit and one for the selected.
This can be useful if you want to find the commit that fixed a bug (you'd use
"broken/fixed" instead of "good/bad" in this case), or if you want to find the
commit that brought a big performance improvement (use "slow/fast"). It's pretty
mind-bending to have to use "good/bad" in these cases, and swap their meanings
in your head.
Thankfully, lazygit already had support for using custom terms during the bisect
(for the case that a bisect was started on the command-line, I suppose), so all
that's needed is adding a way to specify them in lazygit.
Previously our synchronous refreshes took far longer because nothing
was happening concurrently. We now run refresh functions concurrently
and use a wait group to ensure they're all done before returning
Notably, the reflog view is taking ages here because it's got a
few thousand lines to write to the view.
In future we should only populate the view's viewport.
On german/french/spanish keyboards, typing [ requires modifier
keys like AltGr, so the `mod==0` condition is wrong.
Fixes#2573
ch != 0 is useless because IsPrint is implemented this way:
if uint32(r) <= MaxLatin1 {
return properties[uint8(r)]&128 != 0
}
with properties[0] set to 1 (so, bit 7 not set)
-> 0 is not printable.
Previously we used a single-line prompt for a tag annotation. Now we're using the commit message
prompt.
I've had to update other uses of that prompt to allow the summary and description labels to
be passed in
Previously, we would only show the authors based on local commits, but sometimes you want to set a commit author
to that of a commit on another branch. Now, so long as you've viewed the branch's commits, the author will appear
as a suggestion.
Previously we applied a right-align on the first column of _all_ menus, even though we really
only intended for it to be on the first column of the keybindings menu (that you get from pressing
'?')
The true issue was that we were focusing the line in the view before it gets resized in the layout function.
This meant if the view was squashed in accordion mode, the view wouldn't know how to set the cursor/origin to
focus the line.
Now we've got a queue of 'after layout' functions i.e. functions to call at the end of the layout function,
right before views are drawn.
The only caveat is that we can't have an infinite buffer so we're arbitrarily capping it at 1000 and dropping
functions if we exceed that limit. But that really should never happen.
It said "Press tab to toggle focus", which is wrong for people who remapped
their togglePanel key binding to something else. Print the actual key binding
instead.
We have a use-case to rebind 'm' to the merge action in the branches panel. There's three ways to handle this:
1) For all global keybindings, define a per-panel key that invokes it
2) Give a name to all controller actions and allow them to be invoked in custom commands
3) Allow checking for merge conflicts after running a custom command so that users can add their own 'git merge' custom command
that matches the in-built action
Option 1 is hairy, Option 2 though good for users introduces new backwards compatibility issues that I don't want to do
right now, and option 3 is trivially easy to implement so that's what I'm doing.
I've put this under an 'after' key so that we can add more things later. I'm imagining other things like being able to
move the cursor to a newly added item etc.
I considered always running this hook by default but I'd rather not: it's matching on the output text and I'd rather something
like that be explicitly opted-into to avoid cases where we erroneously believe that there are conflicts.
Save has been deprecated for a while, push is the recommended way to save a
stash. Push has been available since 2.13, so we can use it without problems.
I've simplifiied the code because it was too complex for the current requirements, and this fixed the misc/initial_open
test which was occasionally failing due to a race condition around busy tasks
The global counter approach is easy to understand but it's brittle and depends on implicit behaviour that is not very discoverable.
With a global counter, if any goroutine accidentally decrements the counter twice, we'll think lazygit is idle when it's actually busy.
Likewise if a goroutine accidentally increments the counter twice we'll think lazygit is busy when it's actually idle.
With the new approach we have a map of tasks where each task can either be busy or not. We create a new task and add it to the map
when we spawn a worker goroutine (among other things) and we remove it once the task is done.
The task can also be paused and continued for situations where we switch back and forth between running a program and asking for user
input.
In order for this to work with `git push` (and other commands that require credentials) we need to obtain the task from gocui when
we create the worker goroutine, and then pass it along to the commands package to pause/continue the task as required. This is
MUCH more discoverable than the old approach which just decremented and incremented the global counter from within the commands package,
but it's at the cost of expanding some function signatures (arguably a good thing).
Likewise, whenever you want to call WithWaitingStatus or WithLoaderPanel the callback will now have access to the task for pausing/
continuing. We only need to actually make use of this functionality in a couple of places so it's a high price to pay, but I don't
know if I want to introduce a WithWaitingStatusTask and WithLoaderPanelTask function (open to suggestions).
We had a race condition due to refreshing branches in two different places, one which refreshed reflog commits
beforehand. The race condition meant that upon load we wouldn't see recency values (provided by the reflog commits)
against the branches
Turns out we're just running our refresh functions one after the other which isn't ideal but we can fix that separately.
As it stands this wait group isn't doing anything.
I don't know if this is a hack or not: we run a git command and increment the pending action
count to 1 but at some point the command requests a username or password, so we need to prompt
the user to enter that. At that point we don't want to say that there is a pending action,
so we decrement the action count before prompting the user and then re-increment it again afterward.
Given that we panic when the counter goes below zero, it's important that it's not zero
when we run the git command (should be impossible anyway).
I toyed with a different approach using channels and a long-running goroutine that
handles all commands that request credentials but it feels over-engineered compared to this
commit's approach.
The remote branches controller was using its own escape method meaning it didn't go through the flow of cancelling
an active filter. It's now using the same approach as the sub-commits and commit-files contexts: defining a parent
context to return to upon hittin escape.
Given that we now persist search/filter states even after a side context loses focus, we need to make it really
clear to the user that the context is currently being searched/filtered
