This is faster; precision assured as result is a float.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
sqrt is faster, and is sometimes more accurate depending on the libm.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
ff_clz is faster, and uses an intrinsic (at the moment on GCC). exp2 is
a wasteful function for a simple integer exponentiation.
Untested.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Prevents that following scalers in the filter chain will do unintentional color range conversions.
Fixes Ticket #5096
Signed-off-by: Thomas Mundt <loudmax@yahoo.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Replaces by real arithmetic. Tested the validity of these transformations separately.
Numerical differences are ~1e-15, and should not matter: it is not even
clear which is more precise mathematically.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Previosly output was almost useless because background noise, due to
windowing function picked and which is not actually present in audio,
had too much brightness.
Now output of sine wave matches more with SoX.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
complex is not available on all platforms. Furthermore, it is trivial to
rewrite complex number expressions to real arithmetic, and in fact
sometimes advantageous for performance reasons: by wrapping as a complex,
one forces a particular Cartesian representation that is not necessarily optimal for the purpose.
Configure dependencies also removed, and aemphasis is now available across
all platforms.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Instead of calling the input filter request_frame() method,
ff_request_frame() now marks the link and returns immediately.
buffersink is changed to activate the marked filters until
a frame is obtained.
The status field can carry any error code instead of just EOF.
Also only update it through a wrapper function and provide a timestamp.
Update the few filters that used it directly.
Applications are not supposed to mess with links,
they should close the sinks.
Furthermore, this function does not distinguish what end
of the link caused the close and does not have a timestamp.
This field is used for fast comparison between link ages,
it is in AV_TIME_BASE units, in other words microseconds,
µs =~ us.
Renaming it allows a second field in link time base units.
lrint avoids an implicit cast, and is not slower on non-broken libm's. Thus this
represents a Pareto improvement.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
lrint is faster here on -ftree-vectorize with GCC. This is likely simply
an artifact of GCC's rather terrible auto-vectorizer, since as per the
instruction set manuals cvtsd2si and cvttsd2si (or their vector equivalents)
have identical cycle timings.
Anyway, regardless of above, lrint is superior to round accuracy wise.
Safety guaranteed as long int has at least 32 bits.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
lrint is at least as fast, and is more accurate.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
lrint is at least as fast, and more accurate.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
lrint is faster and conveys the intent better here. It is safe as long int has
at least 32 bits.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
In the code we keep using logo_x2-1 and logo_y2-1 rather than logo_x2
and logo_y2 themselves. Define them to be what we need instead, to avoid
the repeated subtractions.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The show option did not take clipping into account, so the borders on
the clipped side wouldn't show up. Fix it.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Relying on AVPixFmtDescriptor.nb_components is cleaner and faster than
checking data and linesize for every possible plane.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is a somewhat subtle failure that can occur when the realloc_array
fails in FORMATS_REF.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
pow is a ridiculous function for computing a simple Gaussian.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Recent commits 6aaac24d72 and
3835554bf8 made progress towards cleaning
up usage of the formats API, and in particular fixed possible NULL pointer
dereferences.
This commit addresses the issue of possible resource leaks when some intermediate
call fails.
Tested with valgrind --leak-check=full --show-leak-kinds=all, and manual simulation
of malloc/realloc failures.
Fixes: CID 1250334.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Recent commits 6aaac24d72 and
3835554bf8 made progress towards cleaning
up usage of the formats API, and in particular fixed possible NULL pointer
dereferences.
This commit addresses the issue of possible resource leaks when some intermediate
call fails.
Tested with valgrind --leak-check=full --show-leak-kinds=all, and manual simulation
of malloc/realloc failures.
Fixes: CID 1338330.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Recent commits 6aaac24d72 and
3835554bf8 made progress towards cleaning
up usage of the formats API, and in particular fixed possible NULL pointer
dereferences.
This commit addresses the issue of possible resource leaks when some intermediate
call fails.
Tested with valgrind --leak-check=full --show-leak-kinds=all, and manual simulation
of malloc/realloc failures.
Fixes: CID 1338326, 1338329.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Recent commits 6aaac24d72 and
3835554bf8 made progress towards cleaning
up usage of the formats API, and in particular fixed possible NULL pointer
dereferences.
This commit addresses the issue of possible resource leaks when some intermediate
call fails.
Tested with valgrind --leak-check=full --show-leak-kinds=all, and manual simulation
of malloc/realloc failures.
Fixes: CID 1338327.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Recent commits 6aaac24d72 and
3835554bf8 made progress towards cleaning
up usage of the formats API, and in particular fixed possible NULL pointer
dereferences.
This commit addresses the issue of possible resource leaks when some intermediate
call fails. Unfortunately, even leaving aside this subtle intermediate
failure aspect, commit 8087632027 was only
partially successful in addressing memleaks. Hopefully, this commit
fixes the issue completely.
Tested with valgrind --leak-check=full --show-leak-kinds=all, and manual simulation
of malloc/realloc failures.
Fixes: CID 1270818.
Reviewed-by: Clément Bœsch <u@pkh.me>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
When the interpolated value is divided by the sum of weights, no
rounding is done, which means the value is truncated. This results in
a slight bias towards dark green in the interpolated area. Rounding
properly removes the bias.
I measured this change to reduce the interpolation error by 1 to 2 %
on average on a number of sample input and logo area combinations.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
fix default basefreq/endfreq comparison
on platform that does not do comparison
in double type
found on zeranoe 32-bit build, where
default freq range is detected as non-default
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
lrint is faster, and is more consistent across the codebase.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Do not clip output samples, so that clipping can be handled by other filters.
Alow setting curve points above 0dB. This is useful when operating with floats.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
This is likely more precise and conveys the intent better.
Reviewed-by: Mark Harris <mark.hsj@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Remove all modes except levels mode.
Users should already switch to other filters with
extended funcionality: vectorscope and waveform.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Fix color fading: previously color could fade to red when
volume level for red color was actually never reached.
Display volume value on right side.
Use red color only if clipping is needed.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
This removes wasteful pow(x, 2.0) that although not terribly important
for speed, is still useless.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Gain computation for various curves was being done in a needlessly
inaccurate fashion. Of course these are all subjective curves, but when
a curve is advertised to the user, it should be matched as closely as
possible within the limitations of libm. In particular, the constants
kept here were pretty inaccurate for double precision.
Speed improvements are mainly due to the avoidance of pow, the most
notorious of the libm functions in terms of performance. To be fair, it
is the GNU libm that is among the worst, but it is not really GNU libm's fault
since others simply yield a higher error as measured in ULP.
"Magic" constants are also accordingly documented, since they take at
least a minute of thought for a casual reader.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
lrintf is anyway used, suggesting we only care up to floating precision.
Rurthermore, there is a compat hack in avutil/libm for this function,
and it is used in avcodec/aacps_tablegen.h.
This yields a non-negligible speedup. Sample benchmark:
x86-64, Haswell, GNU/Linux:
old (draw_mandelbrot):
274635709 decicycles in draw_mandelbrot, 256 runs, 0 skips
300287046 decicycles in draw_mandelbrot, 512 runs, 0 skips
371819935 decicycles in draw_mandelbrot, 1024 runs, 0 skips
336663765 decicycles in draw_mandelbrot, 2048 runs, 0 skips
581851016 decicycles in draw_mandelbrot, 4096 runs, 0 skips
new (draw_mandelbrot):
269882717 decicycles in draw_mandelbrot, 256 runs, 0 skips
296359285 decicycles in draw_mandelbrot, 512 runs, 0 skips
370076599 decicycles in draw_mandelbrot, 1024 runs, 0 skips
331478354 decicycles in draw_mandelbrot, 2048 runs, 0 skips
571904318 decicycles in draw_mandelbrot, 4096 runs, 0 skips
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This option can be used to select useful frames from an ffconcat file which is
using inpoints and outpoints but where the source files are not intra frame
only.
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
This uses M_SQRT1_2, M_SQRT2 instead of the actual literals. Fixed point
values remain unchanged.
Patch tested with FATE on x86.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
The ad-hoc pi constant has a ludicrous number of digits that offer no
value whatsoever. M_PI is more consistent and readable across the
codebase.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Similar to testsrc, but using drawutils and therefore
supporting a lot of pixel formats instead of just rgb24.
This allows using it as input for other tests without
requiring a format conversion.
It is also slightly faster than testsrc for some reason.
Calculation of x an y based on width and height did not work when
width == 0 or height == 0. "0" substitutes the input width and
height, but did so too late for x, y expression evaluation.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
this makes draw_bar faster
slightly different result with old version
check result (with ~3 minutes audio file):
old:
real 0m49.611s
user 0m49.260s
sys 0m0.073s
new:
real 0m47.606s
user 0m47.378s
sys 0m0.068s
PSNR between old and new:
yuv444p PSNR
y:109.519298 u:107.506485 v:104.746878
average:106.816074 min:99.167305 max:inf
yuv422p PSNR
y:109.519298 u:108.025801 v:104.489734
average:107.279817 min:98.007467 max:inf
yuv420p PSNR
y:109.519298 u:108.363875 v:105.290200
average:108.261511 min:97.461812 max:inf
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
FFDIFFSIGN was created explicitly for this purpose, since the common
return a - b idiom is unsafe regarding overflow on signed integers. It
optimizes to branchless code on common compilers.
FFDIFFSIGN also has the subjective benefit of being easier to read due
to lack of ternary operators.
Tested with FATE.
Things not covered by this are unsigned integers, for which overflows
are well defined, and also places where overflow is clearly impossible,
e.g an instance where the a - b was being done on 24 bit values.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Clément Bœsch <u@pkh.me>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
There seems to be some typos in the log messages that are fixed by this.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This converts the usage of strtod to av_strtod in order to unify and
make number parsing more consistent. This also adds support for SI
postfixes.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Should fix build on x86_32-msvc2012
The alternative of emulating fmin/fmax* turns out to be non trivial
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Steven Robertson <steven@strobe.cc>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is likely more precise and conveys the intent better.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This is likely more precise and conveys the intent better.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This is likely more precise and conveys the intent better.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This is likely more precise and conveys the intent better.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This is likely more precise and conveys the intent better.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
add yuv444p, yuv422p, and yuv420p output format (lower cpu usage
on ffplay playback because it does not do format conversion)
custom size with size/s option (fullhd option is deprecated)
custom layout with bar_h, axis_h, and sono_h option
support rational frame rate (within fps/r/rate option)
relaxed frame rate restriction (support fractional sample step)
support all input sample rates
separate sonogram and bargraph volume (with volume/sono_v and
volume2/bar_v)
timeclamp option alias (timeclamp/tc)
fcount option
gamma option alias (gamma/sono_g and gamma2/bar_g)
support custom frequency range (basefreq and endfreq)
support drawing axis using external image file (axisfile option)
alias for disabling drawing to axis (text/axis)
possibility to optimize it using arch specific asm code
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
libc's qsort comparator has a const qualifier on both arguments. This
adds a missing const qualifier to exactly match the comparator API.
Existing usages of av_tree_find, av_tree_insert are appropriately
modified: type signature changes of the comparators, and removal of
unnecessary void * casts of function pointers.
Reviewed-by: Henrik Gramner <henrik@gramner.com>
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
