The function macro always sets .align 2 before declaring the
function label (since 5c5e1ea3) and always sets the section to
.text (since 278caa6a).
The .align 5 before certain functions, added in fc252eba, were added
before .text and .align were added to the function macro and thus
became useless/unused when the function macro got them.
This restores the original intention, to align the loop entry
points.
Signed-off-by: Martin Storsjö <martin@martin.st>
This file no longer uses the pld instruction at all, all such uses
have been split into hpeldsp_arm.S.
Signed-off-by: Martin Storsjö <martin@martin.st>
For:
ff_vc1_inv_trans_{8,4}x{8,4}_{dc_,}neon
ff_put_pixels8x8_neon
ff_put_vc1_mspel_mc{0,1,2,3}{0,1,2,3}_neon (except for 00)
Based on ARM assembly code in libavcodec/arm by Rob Clark and Mans
Rullgard.
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 508.8 23.4 185.4 9.0 +174.4%
Overall 3068.5 31.7 2752.1 29.4 +11.5%
In combination with the preceding patch:
Before After
Mean StdDev Mean StdDev Change
Overall 2925.6 26.2 2752.1 29.4 +6.3%
Signed-off-by: Martin Storsjö <martin@martin.st>
When building for iOS in thumb mode, gas-preprocessor.pl doesn't
mark unused labels as thumb functions (as it does for other
local labels, where it can figure out that they are functions
due to being referenced in branch instructions). This leads to
linker warnings for some of those local labels, such as:
ld: warning: ARM function not 4-byte aligned: __a_evaluation from
libavcodec/libavcodec.a(simple_idct_arm.o)
Therefore, comment them out since they don't have any function.
They do still have a value in documenting key points in the
assembly source though.
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 1323.0 98.0 746.2 60.6 +77.3%
Overall 15400.0 336.4 14147.5 288.4 +8.9%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 1389.3 4.2 967.8 35.1 +43.6%
Overall 15577.5 83.2 15400.0 336.4 +1.2%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 868.2 33.5 436.0 27.0 +99.1%
Overall 15973.0 223.2 15577.5 83.2 +2.5%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 2653.0 28.5 1108.8 51.4 +139.3%
Overall 17049.5 408.2 15973.0 223.2 +6.7%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 366.2 18.3 277.8 13.7 +31.9%
Overall 18420.5 489.1 17049.5 408.2 +8.0%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 1175.0 4.4 366.2 18.3 +220.8%
Overall 19285.5 292.0 18420.5 489.1 +4.7%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 9295.0 114.9 4853.2 83.5 +91.5%
Overall 23699.8 397.6 19285.5 292.0 +22.9%
Signed-off-by: Martin Storsjö <martin@martin.st>
A few of the h264qpel neon functions are shared with other
hpeldsp functions in this file.
This fixes standalone compilation of the h264 decoder on arm.
Signed-off-by: Martin Storsjö <martin@martin.st>
This way, the special IDCT permutations are no longer needed. This
is similar to how H264 does it, and removes the dsputil dependency
imposed by the scantable code.
Also remove the unused type == 0 cases from the plain C version
of the idct.
Signed-off-by: Martin Storsjö <martin@martin.st>
The non-intra-pcm branch in hl_decode_mb (simple, 8bpp) goes from 700
to 672 cycles, and the complete loop of decode_mb_cabac and hl_decode_mb
(in the decode_slice loop) goes from 1759 to 1733 cycles on the clip
tested (cathedral), i.e. almost 30 cycles per mb faster.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes the plain-armv6 version use the same registers as the
armv6t2 version above.
This fixes fate-vp8 on plain-armv6 devices.
Signed-off-by: Martin Storsjö <martin@martin.st>
The sh4 optimizations are removed, because the code is
100% identical to the C code, so it is unlikely to
provide any real practical benefit.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Now, nellymoserenc and aacenc no longer depends on dsputil. Independent
of this patch, wmaprodec also does not depend on dsputil, so I removed
it from there also.
libavutil/arm/asm.S sets '.arch' depending on HAVE_ARMV5TE so that
assembling armv5te code will always succeed even if the default -march
flag does not support it. HAVE_ARMV5TE_EXTERNAL tests assembling code
with the default arch.
Fixes the missing symbol ff_prefetch_arm with --cpu= not including
armv5te.
CC: libav-stable@libav.org
This is identical to what e.g. vp8 does, and prevents the function call
overhead (plus dependency on dsputil for this particular function).
Arm asm updated by Janne Grunau <janne-libav@jannau.net>.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Move some functions from dsputil. The idea is that videodsp contains
functions that are useful for a large and varied set of video decoders.
Currently, it contains emulated_edge_mc() and prefetch().
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This is consistent with usual ARM nomenclature as well as with the
VFPV3 and NEON symbols which both lack the ARM prefix.
Signed-off-by: Mans Rullgard <mans@mansr.com>
When initialising an FFTContext for a plain FFT, mdct_bits is not set
and can contain a garbage value. Since nbits is always valid and for
MDCT operation is mdct_bits - 2 checking this instead avoids using an
uninitialised value while having the same effect.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The loops were reading ahead one line, which could end up outside the
buffer for reference blocks at the edge of the picture. Removing
this readahead has no measurable performance impact.
Signed-off-by: Mans Rullgard <mans@mansr.com>
All our ARM asm preserves alignment so setting this attribute
in a common location is simpler. This removes numerous warnings
when linking with armcc.
Signed-off-by: Mans Rullgard <mans@mansr.com>
In the GNU assembler, a relational expression, bizarrely, has the
value -1 if true, whereas in Apple's it is +1. This patch makes
sure the correct expression is used in both cases.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The clang integrated assembler does not support pre-UAL syntax,
while gcc requires pre-UAL syntax for ARM code. A patch[1] for
clang to support the old syntax as well has been ignored since
January.
This patch chooses the syntax appropriate for each compiler,
allowing both to build the code. Notably, this change allows
building for iphone with the latest Apple Xcode update.
[1] http://llvm.org/bugs/show_bug.cgi?id=11855
Signed-off-by: Mans Rullgard <mans@mansr.com>
The standard syntax requires two destination registers for
LDRD/STRD instructions. Some versions of the GNU assembler
allow using only one with the second implicit, others are
more strict.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This moves all VP3-specific function pointers from dsputil to a
new vp3dsp context. There is no reason to ever use the VP3 IDCT
where an MPEG2 IDCT is expected or vice versa.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This creates proper position independent code when accessing
data symbols if CONFIG_PIC is set.
References to external symbols should now use the movrelx macro.
Some additional code changes are required since this macro may
need a register to hold the GOT pointer.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Change the size specifiers to match the actual element sizes
of the data. This makes no practical difference with strict
alignment checking disabled (the default) other than somewhat
documenting the code. With strict alignment checking on, it
avoids trapping the unaligned loads.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The vertically interpolating variants of these functions read
ahead one line to optimise the loop. On the last line processed,
this might be outside the buffer. Fix these invalid reads by
processing the last line outside the loop.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The assembler may fail to place literal pools close enough to
instructions referencing them. An explicit .ltorg directive
fixes this.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This allows masking CPU features with the -cpuflags avconv option
which is useful for testing different optimisations without rebuilding.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Quite often, the original weights are multiple of 512. By prescaling them
by 1/512 when they are computed (once per frame), no intermediate shifting
is needed, and no prescaling on each call either.
The x86 code already used that trick.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The were broken since August of 2010 without anyone noticing until
three weeks ago. Nobody cares about it anymore and hopefully Marvell
will support NEON like in the PXA978 from now on.
There is only one caller, which does not need the shifting. Other use cases
are situations where different roundings would be needed.
The x86 and neon versions are modified accordingly.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This prevents having to sign-extend on 64-bit systems with 32-bit ints,
such as x86-64. Also fixes crashes on systems where we don't do it and
arguments are not in registers, such as Win64 for all weight functions.
Overall almost 4% faster, idct_add down from 350 to 85 cycles, idct_dc_add
down from 83 to 30 cycles.
squash: rv34 idct rearrange partial register loads
The alignment directive must obviously precede the label.
This was never noticed in ARM mode since the location is
already aligned there.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Due to apprent bugs in the GNU assembler and/or linker, relocations
can be incorrectly processed if the alignment of a Thumb instruction
is changed in the output file compared to the input object.
This fixes crashes in h264 decoding with Thumb enabled. No effect in
ARM mode since everything is 4-byte aligned there.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Perform dequantization while decoding coefficients instead of performing it
on the entire coefficients buffer.
Since quantized coefficients are very sparse, this usually causes a small
speedup. Speedup of around 1% on Panda board compared to the removed here
neon code. Global speedup is probably around 3%.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
This is a hand-tuned version of the code with impossible parts of
the FASTDIV function ommitted.
2-5% faster overall on Cortex-A8.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This prevents build errors when compiler and assembler default
targets differ. Ideally each file would declare the highest
level it requires. This is however not easily possible as it
complicates assembling pre-armv6t2 code in Thumb-2 mode.
HAVE_NEON is used as indicator for ARMv7-A since no other
symbol exists for this and NEON is only available in this
variant.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The inline asm added in bf5d46d uses the 'y' modifier which
is only supported from gcc 4.5. This check allows building
with older compilers.
Signed-off-by: Mans Rullgard <mans@mansr.com>
