virtualenv/FFmpeg
1
0
Fork 0
mirror of https://github.com/FFmpeg/FFmpeg.git synced 2024-12-12 19:18:44 +02:00
Code Issues Releases Activity
43,816 Commits 37 Branches 400 Tags 463 MiB
4abe3b049d
Commit Graph

43816 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Ronald S. Bultje
a451324ddd vp9: ignore reference segmentation map if error_resilience flag is set. 
Fixes ffvp9_fails_where_libvpx.succeeds.webm.

Bug-Id: ffmpeg/3849.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
 2016-10-04 10:54:07 +02:00
Vittorio Giovara
dc3fe45fca fate: Add test for rscc palette 2016-10-02 15:42:03 -04:00
Carl Eugen Hoyos
c19830aa2c rscc: Support palette format 
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
 2016-10-02 15:42:03 -04:00
Vittorio Giovara
b8d5070db6 avcodec: Document AV_PKT_DATA_PALETTE side data type 2016-10-02 15:42:03 -04:00
Vittorio Giovara
497c087939 avidec: Set palette alpha as fully opaque 
Palette format is always in RGBA.
 2016-10-02 15:42:03 -04:00
Vittorio Giovara
bad4aad403 avidec: Do not special case palette on big-endian 
This simplifies the code a bit, does not change output data in any way.
 2016-10-02 15:42:03 -04:00
Vittorio Giovara
310c55f179 pixfmt: Document alternative names for smpte 431 and 432 2016-10-02 15:42:03 -04:00
Mark Thompson
5a5df90d9c vaapi_h265: Add main 10 encode support 2016-10-02 20:23:18 +01:00
Mark Thompson
eaaaabf6c9 hwcontext_vaapi: Enable P010 support 
This is required for 10-bit surfaces.
 2016-10-02 20:23:18 +01:00
Mark Thompson
b8cac1e830 vaapi_h265: Fix buffering parameters 
A decoder may need this to be set correctly to output frames in the
right order.
 2016-10-02 20:23:18 +01:00
Mark Thompson
fc30a90898 vaapi_h265: Fix slice header writing 
This was not observed earlier because the only syntax element which
it normally misses with the current setup is slice_qp_delta, but that
is always going to be zero (in IDR frames QP isn't varied on the
slice) which will always exp-golomb code as a single 1 bit.  The
immediately following part is the byte alignment, which is always a 1
bit followed by 0s which are ignored, so as long as the bitstream is
never aligned at that point we will never notice because the only
difference is that an ignored bit is a 1 instead of a 0.
 2016-10-02 20:23:18 +01:00
Mark Thompson
ec17ab381e vaapi_h264: Write bitstream restriction fields 2016-10-02 20:23:18 +01:00
Mark Thompson
17a0f9481c vaapi_h264: Fix CFR mode with frame_rate set in AVCodecContext 2016-10-02 20:23:18 +01:00
Mark Thompson
314b421dd8 vaapi_encode: Decide on GOP setup before initialising sequence parameters 
This was always too late; several fields related to it have been incorrectly
zero since the encoder was added.
 2016-10-02 20:23:18 +01:00
Anton Khirnov
5cc0057f49 lavu: remove the custom atomic API 
It has been replaced by C11 stdatomic.h and is now unused.
 2016-10-02 19:35:55 +02:00
Anton Khirnov
59c7022740 pthread_frame: use atomics for frame progress 2016-10-02 19:35:46 +02:00
Anton Khirnov
64a31b2854 pthread_frame: use atomics for PerThreadContext.state 2016-10-02 19:35:34 +02:00
Anton Khirnov
db2733256d pthread_frame: use a thread-safe way for signalling threads to die 
Current code uses a plain int in a racy way, which is UB.
 2016-10-02 19:35:23 +02:00
Anton Khirnov
8385ba53f1 mmaldec: convert to stdatomic 2016-10-02 19:35:12 +02:00
Anton Khirnov
3a165c187d v4l2: convert to stdatomic 2016-10-02 19:34:57 +02:00
Anton Khirnov
27079a426c buffer: convert to stdatomic 2016-10-02 18:58:04 +02:00
Anton Khirnov
eb34d40354 Add a compat dummy stdatomic.h used when threading is disabled 
Adapted from the code by Rémi Denis-Courmont from VLC
 2016-10-02 18:57:56 +02:00
Anton Khirnov
f9a6a80e06 Add a compat stdatomic.h implementation based on pthreads 
Adapted from the code by Rémi Denis-Courmont from VLC
 2016-10-02 18:56:52 +02:00
Anton Khirnov
bb81ed4765 Add a compat stdatomic.h implementation based on suncc atomics 
Adapted from the code by Rémi Denis-Courmont from VLC
 2016-10-02 18:55:41 +02:00
Anton Khirnov
c2755864af Add a compat stdatomic.h implementation based on windows atomics 
Adapted from the code by Rémi Denis-Courmont from VLC
 2016-10-02 18:54:28 +02:00
Anton Khirnov
4e928ef340 Add a compat stdatomic.h implementation based on GCC atomics 
Adapted from the code by Rémi Denis-Courmont from VLC
 2016-10-02 18:52:08 +02:00
Anton Khirnov
13f5d2bf75 configure: check for stdatomic.h 
Since this is a C11 feature, it requires -std=c11.

Not actually used for anything yet, that will be added in the following
commits.
 2016-10-02 18:49:14 +02:00
Luca Barbato
b015872c0d huffyuvdsp: Enable the altivec code for PPC little-endian as well 
Confirmed to work by checkasm.
 2016-10-02 17:13:36 +02:00
Luca Barbato
1d25a86902 huffyuvdsp: Reenable PPC optimizations 2016-10-02 17:13:36 +02:00
Alexandra Hájková
22c3ab1864 checkasm: Add test for huffyuvdsp add_bytes 
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
 2016-10-02 17:13:26 +02:00
Anton Khirnov
27085d1b47 avconv: only retry decoding on actual decoding errors 
Errors during decoding are currently considered non-fatal and do not
terminate transcoding, so even if parts of the data are corrupted, the
rest may be decodable.

However, that should apply only to the actual decoding calls, not to the
failures elsewhere (e.g. configuring filters).
 2016-10-02 11:41:45 +02:00
Anton Khirnov
f6772e9bf8 avconv: make sure the filtergraph is freed on init failure 
The filtergraph's existence is used in several places to mean that the
filtergraph is fully configured. This causes problems if it's allocated,
but the initialization fails (e.g. if a non-existent filter is
specified).
 2016-10-02 11:41:45 +02:00
Anton Khirnov
d10102d23c avconv: set the encoding framerate when the output is CFR 2016-10-02 11:41:45 +02:00
Anton Khirnov
5bf2454e7c h264dec: support broken files with mp4 extradata/annex b data 
Bug-Id: 966
 2016-10-02 11:41:45 +02:00
Anton Khirnov
2124711b95 hwcontext_vaapi: add a quirk for the missing MemoryType attribute 
The Intel binary iHD driver does not support the
VASurfaceAttribMemoryType, so surface allocation will fail when using
it.
 2016-10-02 11:41:45 +02:00
Justin Ruggles
b57e38f52c ac3dsp: x86: Replace inline asm for in-decoder downmixing with standalone asm 
Adds a wrapper function for downmixing which detects channel count changes
and updates the selected downmix function accordingly.

Simplification and porting to current x86inc infrastructure by Diego Biurrun.

Signed-off-by: Diego Biurrun <diego@biurrun.de>
 2016-10-01 00:46:25 +02:00
Justin Ruggles
a9ba59591e ac3dsp: Add some special-case handling for the C downmix function 
This is about 200% faster for in-decoder downmixing of 5.0 and 5.1 content.

Signed-off-by: Diego Biurrun <diego@biurrun.de>
 2016-10-01 00:46:18 +02:00
Justin Ruggles
43717469f9 ac3dsp: Reverse matrix in/out order in downmix() 
Also use (float **) instead of (float (*)[2]). This matches the matrix
layout in libavresample so we can reuse assembly code between the two.

Signed-off-by: Diego Biurrun <diego@biurrun.de>
 2016-10-01 00:45:55 +02:00
Anton Khirnov
8ea35af762 avio: add a new flag for marking streams seekable by timestamp 2016-09-30 16:55:45 +02:00
Anton Khirnov
75c1db6152 avio: cosmetics, prettify AVIO_SEEKABLE_NORMAL 
Move the doxy above the definition, change the value itself to the
(1 << n) pattern, which is more readable for flags.
 2016-09-30 16:54:55 +02:00
Anton Khirnov
83548fe894 lavf: fix usage of AVIOContext.seekable 
It is supposed to be a flag. The only currently defined value is
AVIO_SEEKABLE_NORMAL, but other ones may be added in the future.
However all the current lavf code treats this field as a bool (mainly
for historical reasons).
Change all those cases to properly check for AVIO_SEEKABLE_NORMAL.
 2016-09-30 16:54:33 +02:00
Hendrik Leppkes
8d1267932c x86/h264_weight: use appropriate register size for weight parameters 
This fixes decoding corruption on 64 bit windows.

Signed-off-by: Martin Storsjö <martin@martin.st>
 2016-09-30 12:18:22 +03:00
Diego Biurrun
2caa93b813 mpegaudiodsp: Change type of array stride parameters to ptrdiff_t 
This avoids SIMD-optimized functions having to sign-extend their
stride argument manually to be able to do pointer arithmetic.
 2016-09-29 17:54:24 +02:00
Diego Biurrun
15b4f494fc mss*: Change type of array stride parameters to ptrdiff_t 
ptrdiff_t is the correct type for array strides and similar.
 2016-09-29 17:54:24 +02:00
Diego Biurrun
a339e919ca ea: Change type of array stride parameters to ptrdiff_t 
ptrdiff_t is the correct type for array strides and similar.
 2016-09-29 17:54:23 +02:00
Diego Biurrun
ba479f3daa hevc: Change type of array stride parameters to ptrdiff_t 
ptrdiff_t is the correct type for array strides and similar.
 2016-09-29 17:54:23 +02:00
Diego Biurrun
e4a94d8b36 h264chroma: Change type of stride parameters to ptrdiff_t 
This avoids SIMD-optimized functions having to sign-extend their
stride argument manually to be able to do pointer arithmetic.
 2016-09-29 14:48:04 +02:00
Diego Biurrun
2ec9fa5ec6 idct: Change type of array stride parameters to ptrdiff_t 
ptrdiff_t is the correct type for array strides and similar.
 2016-09-29 14:48:03 +02:00
Diego Biurrun
b2939a7527 blockdsp: Change type of array stride parameters to ptrdiff_t 
ptrdiff_t is the correct type for array strides and similar.
 2016-09-29 14:48:03 +02:00
Diego Biurrun
3281d823cd intrax8: Change type of array stride parameters to ptrdiff_t 
ptrdiff_t is the correct type for array strides and similar.

Also rename all such parameters to "stride" for consistency.
 2016-09-29 14:48:03 +02:00