This is done immediately without waiting for the next major bump
just as in 9546b3a1cb and
4eaaa38d3d.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They are currently non-const for reasons unknown, although
avio_write() accepts a const buffer.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These defines are also used in other contexts than just AVCodecContext
ones, e.g. in libavformat. Furthermore, given that these defines are
public, the AV-prefix is the right one, so deprecate (and not just move)
the FF-macros.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This reverts commit eb88ccb92e.
AVCodecContext fields are the proper place for a decoder to export such values.
This change is in preparation for the following commits.
add option named rtmp_enhanced_codec,
it would support hvc1,av01,vp09 now,
the fourcc is using Array of strings.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
These are in-place transforms, required for DCT-I and DST-I.
Templated as the mod2 variant requires minor modifications, and is
required specifically for DCT-I/DST-I.
Can be used to configure libplacebo's underlying raw options, which
sometimes includes new or advanced / in-depth settings not (yet) exposed
by vf_libplacebo.
C++ doesn't support designated initializers until C++20. We have
a bunch of pre-defined channel layouts, the gains to make them
usable in C++ exceed the losses.
Bump minor version so C++ project can check before use these defines.
Also initialize .opaque field explicitly to reduce warning in C++.
Signed-off-by: James Almer <jamrial@gmail.com>
The commits eac4324bfb and
cd8211527e renamed the examples, but the
targets were not updated. Hence, the builds are missing -lm.
Signed-off-by: Sebastian Ramacher <sramacher@debian.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Stop claiming the argument is always a floating point number, which
* confuses floating point and decimal numbers
* is not always true even accounting for the above point
Read the timebase from FrameData rather than the input stream. This
should fix#10393 and generally be more reliable.
Replace the use of '-1' to indicate demuxing timebase with the string
'demux'. Also allow to request filter timebase with
'-enc_time_base filter'.
This decoding flag makes decoders drop all frames after a parameter
change, but what exactly constitutes a parameter change is not well
defined and will typically depend on the exact use case.
This functionality then does not belong in libavcodec, but rather in
user code
Useful for discovering bugs that depend on a specific thread count.
Use like THREADS=randomX for a random thread count from 1 to X, with
X=16 when not specified. Note that the thread count is different for
every test.
Uses the existing code for av_get_random_seed() to return a buffer with
cryptographically secure random data, or an error if none could be generated.
Signed-off-by: James Almer <jamrial@gmail.com>
Support decoding and embedding VANC packets delivered via SMPTE 2038
into the SDI output. We leverage an intermediate queue because
data packets are announced separately from video but we need to embed
the data into the video frame when it is output.
Note that this patch has some additional abstraction for data
streams in general as opposed to just SMPTE 2038 packets. This is
because subsequent patches will introduce support for other
data codecs.
Thanks to Marton Balint for review/feedback.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
- text is now shaped using libharfbuz
- glyphs position is now accurate to 1/4 pixel in both directions
- the default line height is now the one defined in the font
Adds libharfbuzz dependency.
I've been sitting on this for 3 1/2 years now(!), and I finally got
around to fixing the loose ends and convincing myself that it was
correct. It follows the same basic structure as yadif_cuda, including
leaving out the edge handling, to avoid expensive branching.
The contents of this field are not defined for decoding. Use
pkt_timebase, which is the timebase of demuxed packets.
Drop a tautological av_packet_rescale_ts() call, as the stream and
decoder timebases are the same.
Added prerequisites that must be met before providing support for the MPEG-5 EVC codec
- Added new entry to codec IDs list
- Added new entry to the codec descriptor list
- Bumped libavcodec minor version
- Added profiles for EVC codec
Signed-off-by: Dawid Kozinski <d.kozinski@samsung.com>
Signed-off-by: James Almer <jamrial@gmail.com>
0th order modified bessel function of the first kind are used in multiple
places, lets avoid having 3+ different implementations
I picked this one as its accurate and quite fast, it can be replaced if
a better one is found
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This algorithm has once again been refactored, this time leading to a
dropping of the old `tone_mapping_mode` field, to be replaced by a
single tunable hybrid mode with configurable strength.
We can approximately map the old modes onto the new API for backwards
compatibility. Replace deprecated enums by their integer equivalents to
safely preserve this API until the next bump.
Upstream deprecated the old ad-hoc, enum/intent-based gamut mapping API
and added a new API based on colorimetrically accurate gamut mapping
functions.
The relevant change for us is the addition of several new modes, as well
as deprecation of the old options. Update the documentation accordingly.
Not only this is information that relies on the concept of a sequence of
frames, which is completely out of place as a field in AVFrame, but there are
no known or intended uses of this field.
Signed-off-by: James Almer <jamrial@gmail.com>
For encoding, this field is entirely redundant with
AVCodecContext.framerate.
For decoding, this field is entirely redundant with
AV_CODEC_PROP_FIELDS.
This exposes libplacebo's frame mixing functionality to vf_libplacebo,
by allowing users to specify a desired target fps to output at. Incoming
frames will be smoothly resampled (in a manner determined by the
`frame_mixer` option, to be added in the next commit).
To generate a consistently timed output stream, we directly use the
desired framerate as the timebase, and simply output frames in
sequential order (tracked by the number of frames output so far).
THis filter can correct certain issues seen from upstream sources
where the cc_count is not properly set or the CEA-608 tuples are
not at the start of the payload as expected.
Make use of the ccfifo to extract and immediately repack the CEA-708
side data, thereby removing any extra padding and ensuring the 608
tuples are at the front of the payload.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Commit 55b81528a9 ("doc/filters: itemize crop examples") dropped the
quotation marks from these examples, but this one remained. Quotes are
actually needed to put the example into a command line or a program, but
removing it here makes the example consistent with the document.
Motivated by a desire to use vf_libplacebo as a GPU-accelerated
cropping/padding/zooming filter. This commit adds support for setting
the `input/target.crop` fields as dynamic expressions.
Re-use the same generic variables available to other scale and crop type
filters, and also add some more that we can afford as a result of being
able to set these properties dynamically.
It's worth pointing out that `out_t/ot` is currently redundant with
`in_t/t` since it will always contain the same PTS values, but I plan on
changing this in the near future.
I decided to also expose `crop_w/crop_h` and `pos_w/pos_h` as variables
in the expression parser itself, since this enables the fairly common
use case of determining dimensions first and then placing the image
appropriately, such as is done in the default behavior (which centers
the cropped/placed region by default).
In some circumstances, libplacebo will clear the background as a result
of cropping/padding. Currently, this uses the hard-coded default fill
color of black. This option makes this behavior configurable.
Will remove native backend, so change the default backend in filters,
and also remove the python scripts which generate native model file.
Signed-off-by: Ting Fu <ting.fu@intel.com>
Some testing revealed this to be a very efficient and reliable method of
ingesting GPU frames into libplacebo, so it's a good idea to give as an
example.
This example being first is now misleading because round-tripping
through hwdownload/hwupload is neither required nor recommended. Also,
the comment about avoiding format conversion is unnecessary because
`libplacebo` will now inherit the input frame format by default.
This option adds a long string of numbers to the progress line, where
i-th number contains the base-2 logarithm of the number of times a frame
with this QP value was seen by print_report().
There are multiple problems with this feature:
* despite this existing since 2005, web search shows no indication
that it was ever useful for any meaningful purpose;
* the format of what is printed is entirely undocumented, one has to
find it out from the source code;
* QP values above 31 are silently ignored;
* it only works with one video stream;
* as it relies on global state, it is in conflict with ongoing
architectural changes.
It then seems that the nontrivial cost of maintaining this option is not
worth its negligible (or possibly negative - since it pollutes the
already large option space) value.
Users who really need similar functionality can also implement it
themselves using -vstats.
The function now accepts an existing buffer to avoid unnecessary allocations,
as well as only reporting the needed amount of bytes if you pass a NULL pointer
as input for data.
For this, both parameters become input and output, as well as making data
optional. This is backwards compatible, and as such not breaking any existing
use of the function in external code (if there's any).
Signed-off-by: James Almer <jamrial@gmail.com>
In particular, add a sentence to introduce the example, and add a
simpler starting example with no options.
Also use different format for input.avi and output.mp4, to convey
that the conversion also works on the container format.
Address issue:
http://trac.ffmpeg.org/ticket/8730
Document metadata entries set by the filter, extend and clarify
options, add additional example showing how to extract the generated
data.
Address issue:
http://trac.ffmpeg.org/ticket/8766
Drop mention of unsupported N:M syntax, dropped since 0ed61546c4.
Also, drop reference of common expression constants, and fix
description of a expression parameter.
Fix issue:
http://trac.ffmpeg.org/ticket/9974