It implemented this because it wants to do custom truncation of the ref name;
however, we can achieve the same thing by passing the truncated ref name to our
DynamicTitleBuilder, which was previously unused.
When editing a commit, the index of the current commit can change; for example,
when merge commits are involved, or when working with stacked branches where
"update-ref" commands may be added above the selected commit.
Reselect the current commit after pressing "e"; this requires doing the refresh
blocking on the main thread. (Another option that I considered was to use a
SYNC refresh, and then select the new line with an OnUIThread inside the Then
function. This also works, but results in a very visible lag.)
This is useful for when you begin to type the message in lazygit's commit panel,
and then realize that you'd rather use your editor's more powerful editing
capabilities. Pressing <c-o> will take you right there.
It determines the yellow/red status by getting the merge-base between the
current branch and its upstream; while we're rebasing, the current branch is
HEAD, so it tried to get the merge-base between HEAD and HEAD{u}, which doesn't
work. Fix this by passing the name of the checked-out branch separately.
This also fixes a bug where after the rebase each commit in the commits view had a tick against it because we hadn't
refreshed the view since the base commit was no longer marked
This was on oversight on my part: I assumed that the --work-tree arg was
always intended for use with linked worktrees which have a .git file
pointing back to the repo.
I'm honestly confused now: seems like there are three kinds of worktrees:
* the main worktree of a non-bare repo
* a linked worktree (with its own gitdir in the repo's worktrees/ dir)
* a random folder which you specify as a worktree with the --work-tree arg
I'm pretty sure the --work-tree arg is only intended to be used with this
third kind or workree
The proper fix is to actually have these two functions share code,
or for views to be able to manage their own heights based on their contents.
But I want to get this out for the sake of a Lazygit Anniversary release.
Now that we refresh upon focus, we can scrap this file watching code.
Stefan says few git UIs use file watching, and I understand why: the
reason this code was problematic in the first place is that watching
files is expensive and if you have too many open file handles that
can cause problems.
Importantly: this code that's being removed was _already_ dead.
I've been thinking about this for a while: I think it looks really cool if nuking your working tree
actually results in a nuke animation.
So I've added an opt-out config for it
This allows to do the equivalent of "git rebase --onto <target> <base>", by
first marking the <base> commit with the new command, and then selecting the
target branch and invoking the usual rebase command there.
We are in the outsideFilterModeBindings section here; all of these handlers are
wrapped in a OutsideFilterMode guard in a loop below. No need to add one
manually here.
It's tricky to get this right for reflog commits wrt what's the current branch
for each one; so just disable it entirely here, it's probably not something
anybody needs here.
We want to mark all local branch heads with a "*" in the local commits panel, to
make it easier to see how branches are stacked onto each other. In order to not
confuse users with "*" markers that they don't understand, do this only for the
case where users actually use stacked branches; those users are likely not going
to be confused by the display. This means we want to filter out a few branch
heads that shouldn't get the marker: the current branch, any main branch, and
any old branch that has been merged to master already.
We've been sometimes using lo and sometimes using my slices package, and we need to pick one
for consistency. Lo is more extensive and better maintained so we're going with that.
My slices package was a superset of go's own slices package so in some places I've just used
the official one (the methods were just wrappers anyway).
I've also moved the remaining methods into the utils package.
In the presentation layer, when showing branches, we'll show worktrees against branches if they're
associated. But there was a race condition: if the worktree model was refreshed after the branches model,
it wouldn't be used in the presentation layer when it came time to render the branches.
A better solution would be to have some way of signalling that a particular context needs to be refreshed
and after all the models are done being refreshed, we then refresh the contexts. This will prevent
double-renders
There are quite a few paths you might want to get e.g. the repo's path, the worktree's path,
the repo's git dir path, the worktree's git dir path. I want these all obtained once and
then used when needed rather than having to have IO whenever we need them. This is not so
much about reducing time spent on IO as it is about not having to care about errors every time
we want a path.
We now always re-use the state of the repo if we're returning to it, and we always reset the windows to their default tabs.
We reset to default tabs because it's easy to implement. If people want to:
* have tab states be retained when switching
* have tab states specific to the current repo retained when switching back
Then we'll need to revisit this
Older versions of git don't support the -z flag in `git worktree list`.
So we're using newlines.
Also, we're not raising an error upon error because that triggers another refresh,
which gets us into an infinite loop
For marking as good or bad, the current commit is pretty much always the one you
want to mark, not the selected. It's different for skipping; sometimes you know
already that a certain commit doesn't compile, for example, so you might
navigate there and mark it as skipped. So in the case that the current commit is
not the selected one, we now offer two separate menu entries for skipping, one
for the current commit and one for the selected.
This can be useful if you want to find the commit that fixed a bug (you'd use
"broken/fixed" instead of "good/bad" in this case), or if you want to find the
commit that brought a big performance improvement (use "slow/fast"). It's pretty
mind-bending to have to use "good/bad" in these cases, and swap their meanings
in your head.
Thankfully, lazygit already had support for using custom terms during the bisect
(for the case that a bisect was started on the command-line, I suppose), so all
that's needed is adding a way to specify them in lazygit.
Previously our synchronous refreshes took far longer because nothing
was happening concurrently. We now run refresh functions concurrently
and use a wait group to ensure they're all done before returning
Previously we used a single-line prompt for a tag annotation. Now we're using the commit message
prompt.
I've had to update other uses of that prompt to allow the summary and description labels to
be passed in
Previously, we would only show the authors based on local commits, but sometimes you want to set a commit author
to that of a commit on another branch. Now, so long as you've viewed the branch's commits, the author will appear
as a suggestion.
Previously we applied a right-align on the first column of _all_ menus, even though we really
only intended for it to be on the first column of the keybindings menu (that you get from pressing
'?')
We have a use-case to rebind 'm' to the merge action in the branches panel. There's three ways to handle this:
1) For all global keybindings, define a per-panel key that invokes it
2) Give a name to all controller actions and allow them to be invoked in custom commands
3) Allow checking for merge conflicts after running a custom command so that users can add their own 'git merge' custom command
that matches the in-built action
Option 1 is hairy, Option 2 though good for users introduces new backwards compatibility issues that I don't want to do
right now, and option 3 is trivially easy to implement so that's what I'm doing.
I've put this under an 'after' key so that we can add more things later. I'm imagining other things like being able to
move the cursor to a newly added item etc.
I considered always running this hook by default but I'd rather not: it's matching on the output text and I'd rather something
like that be explicitly opted-into to avoid cases where we erroneously believe that there are conflicts.
Save has been deprecated for a while, push is the recommended way to save a
stash. Push has been available since 2.13, so we can use it without problems.
The global counter approach is easy to understand but it's brittle and depends on implicit behaviour that is not very discoverable.
With a global counter, if any goroutine accidentally decrements the counter twice, we'll think lazygit is idle when it's actually busy.
Likewise if a goroutine accidentally increments the counter twice we'll think lazygit is busy when it's actually idle.
With the new approach we have a map of tasks where each task can either be busy or not. We create a new task and add it to the map
when we spawn a worker goroutine (among other things) and we remove it once the task is done.
The task can also be paused and continued for situations where we switch back and forth between running a program and asking for user
input.
In order for this to work with `git push` (and other commands that require credentials) we need to obtain the task from gocui when
we create the worker goroutine, and then pass it along to the commands package to pause/continue the task as required. This is
MUCH more discoverable than the old approach which just decremented and incremented the global counter from within the commands package,
but it's at the cost of expanding some function signatures (arguably a good thing).
Likewise, whenever you want to call WithWaitingStatus or WithLoaderPanel the callback will now have access to the task for pausing/
continuing. We only need to actually make use of this functionality in a couple of places so it's a high price to pay, but I don't
know if I want to introduce a WithWaitingStatusTask and WithLoaderPanelTask function (open to suggestions).
We had a race condition due to refreshing branches in two different places, one which refreshed reflog commits
beforehand. The race condition meant that upon load we wouldn't see recency values (provided by the reflog commits)
against the branches
Turns out we're just running our refresh functions one after the other which isn't ideal but we can fix that separately.
As it stands this wait group isn't doing anything.
I don't know if this is a hack or not: we run a git command and increment the pending action
count to 1 but at some point the command requests a username or password, so we need to prompt
the user to enter that. At that point we don't want to say that there is a pending action,
so we decrement the action count before prompting the user and then re-increment it again afterward.
Given that we panic when the counter goes below zero, it's important that it's not zero
when we run the git command (should be impossible anyway).
I toyed with a different approach using channels and a long-running goroutine that
handles all commands that request credentials but it feels over-engineered compared to this
commit's approach.
The remote branches controller was using its own escape method meaning it didn't go through the flow of cancelling
an active filter. It's now using the same approach as the sub-commits and commit-files contexts: defining a parent
context to return to upon hittin escape.
Given that we now persist search/filter states even after a side context loses focus, we need to make it really
clear to the user that the context is currently being searched/filtered
This is a pickle: initially I wanted it so that a filter would cancel automatically if the current context lost focus.
But there are situations where you want to retain the focus, e.g. when a popup appears, or when you view the commits
of a branch. The issue is that when you view the commits of a branch, the branches context is removed from the context
stack. Even if this were not the case, you could imagine going branches -> sub-commits -> files -> sub-commits, where
in that case branches would definitely be off the stack upon navigating to the files context.
So because I'm too lazy to find a proper solution to this problem, I'm just making it so that filters in side contexts
are retained unless explicitly cancelled.
There's another edge case this commit handles which is that if I'm in the sub-commits context via the branches context
and start a search, then navigate to the reflog context and hit enter to get to the sub-commits context again, I need
to cancel the search before I switch. Likewise with the commit files context.
For consistency with the previous commit.
Note that this menu entry is used both for unstaged and for staged changes, and
for staged changes it is not quite accurate, as we are not discarding changes in
that case (just unstaging them). Not sure it's worth fixing this; it's still
better than "Delete", anyway.
The title was saying "Unstage lines", which was just wrong. The text said
"Delete lines", which can be seen as a bit misleading; we are only discarding
the changes to the selected lines, not deleting the lines themselves.
For consistency, rename the config variable skipUnstageLineWarning accordingly.
When stopping in a rebase because of a conflict, it is nice to see the commit
that git is trying to apply. Create a fake todo entry labelled "conflict" for
this, and show the "<-- YOU ARE HERE ---" string for that one (in red) instead
of for the real current head.
We use CommitFilesController also for the files of commits that we show
elsewhere, e.g. for branch commits, tags, or stashes. It doesn't make sense to
discard changes from those (for stashes it might be possible to implement it
somehow, but that would be a new feature), so we disallow it unless we are in
the local commits panel.
Discarding changes to an entire directory doesn't quite work correctly in all
cases; for example, if the current commit added files to the directory (but the
directory existed before) then those files won't be removed.
It might be possible to fix the command so that these cases always work for
directories, but I don't think it's worth the effort (you can always use a
custom patch for that), so let's display an error for now.
We have not been good at consistent casing so far. Now we use 'Sentence case' everywhere. EVERYWHERE.
Also Removing 'Lc' prefix from i18n field names: the 'Lc' stood for lowercase but now that everything
is in 'Sentence case' there's no need for the distinction.
I've got a couple lower case things I've kept: namely, things that show up in parentheses.
By constructing an arg vector manually, we no longer need to quote arguments
Mandate that args must be passed when building a command
Now you need to provide an args array when building a command.
There are a handful of places where we need to deal with a string,
such as with user-defined custom commands, and for those we now require
that at the callsite they use str.ToArgv to do that. I don't want
to provide a method out of the box for it because I want to discourage its
use.
For some reason we were invoking a command through a shell when amending a
commit, and I don't believe we needed to do that as there was nothing user-
supplied about the command. So I've switched to using a regular command out-
side the shell there
If a given menu item has an associated keybinding of 'enter', hitting enter won't actually execute
that item unless your cursor is on it. This creates confusion, and so we're going to use a strikethrough
style to communicate that the keybinding is reserved for something else.
The option doesn't have any affect in these views, so we don't need to toggle it
here. But the problem was the HandleFocus call at the end: this would activate
the wrong view, so we need to avoid it here.
Show an error if the user tries to turn the option on, to let them know that it
doesn't work here.
It's not possible to reliably stage things into a custom patch when "ignore
whitespace" is on, so always treat it as off here (like we do in the staging
panel).
It looks like this is a regression that was introduced in 8edad826ca.
Our refresh code may try to push a context. It does this in two places:
1) when all merge conflicts are resolved, we push a 'continue merge?' confirmation context
2) when all conflicts of a given file are resolved and we're in the merge conflicts context,
we push the files context.
Sometimes we push the confirmation context and then push the files context over it, so the user
never sees the confirmation context.
This commit fixes the race condition by adding a check to ensure that we're still in the
merge conflicts panel before we try escaping from it
I don't see a reason why this restriction to have the selection be always
visible was necessary. Removing it has two benefits:
1. Scrolling a list view doesn't change the selection. A common scenario: you
look at one of the commits of your current branch; you want to see the how
many'th commit this is, but the beginning of the branch is scrolled off the
bottom of the commits panel. You scroll down to find the beginning of your
branch, but this changes the selection and shows a different commit now - not
what you want.
2. It is possible to scroll a panel that is not the current one without changing
the focus to it. That's how windows in other GUIs usually behave.
We now refresh the staging panel when doing an unscoped refresh, so that if we commit from the staging panel we escape
back to the files panel if need be. But that causes flickering when doing an unscoped refresh from other contexts,
because the refreshStagingPanel function assumes that the staging panel has focus. So we're adding a guard at the top
of that function to early exit if we don't have focus.
When cycling history, we want to make it so that upon returning to the original prompt, you get your text back.
Importantly, we don't want to use the existing preservedMessage field for that because that's only for preserving
a NEW commit message, and we don't want the history stuff of the commit reword flow to overwrite that.
When we use the one panel for the entire commit message, its tricky to have a keybinding both for adding a newline and submitting.
By having two panels: one for the summary line and one for the description, we allow for 'enter' to submit the message when done from the summary panel,
and 'enter' to add a newline when done from the description panel. Alt-enter, for those who can use that key combo, also works for submitting the message
from the description panel. For those who can't use that key combo, and don't want to remap the keybinding, they can hit tab to go back to the summary panel
and then 'enter' to submit the message.
We have some awkwardness in that both contexts (i.e. panels) need to appear and disappear in tandem and we don't have a great way of handling that concept,
so we just push both contexts one after the other, and likewise remove both contexts when we escape.
