currently, the model outputs the rain, and so need a subtraction
in filter c code to get the final derain result.
I've sent a PR to update the model file and accepted, see at
https://github.com/XueweiMeng/derain_filter/pull/3
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Related to this are the following changes:
* Mention the GNUmakefile that AviSynth+ provides for installing
just the headers.
* Expand on users installing AviSynth on their system a little
more.
When the user opted to write the Cues at the beginning, the Cues were
simply written without checking in advance whether enough space has been
reserved for them. If it wasn't enough, the data following the space
reserved for the Cues was simply overwritten, corrupting the file.
This commit changes this by checking whether enough space has been
reserved for the Cues before outputting anything. If it isn't enough,
no Cues will be output at all and the file will be finalized normally,
yet writing the trailer will nevertheless return an error to notify
the user that his wish of having Cues at the front of the file hasn't
been fulfilled.
This change opens new usecases for this option: It is now safe to use
this option to e.g. record live streams or to use it when muxing the
output of an expensive encoding, because when the reserved space turns
out to be insufficient, one ends up with a file that just lacks Cues
but is otherwise fine.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This commit updates the documentation of av_read_frame() to match its
actual behaviour in several ways:
1. On success, av_read_frame() always returns refcounted packets.
2. It can handle uninitialized packets.
3. On error, it always returns blank packets.
This will allow callers to not initialize or unref unnecessarily.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, it was completely unspecified what the content of the
destination packet dst was on error. Depending upon where the error
happened calling av_packet_unref() on dst might be dangerous.
This commit changes this by making sure that dst is blank on error, so
unreferencing it again is safe (and still pointless). This behaviour is
documented.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
They use non-public functions, which is unacceptable for a public API
example. Rename the example back to avio_list_dir.
This effectively reverts c84d208c27 and
767d780ec0.
The Y channel is handled by dnn, and also resized by dnn. The UV channels
are resized with swscale.
The command to use espcn.pb (see vf_sr) looks like:
./ffmpeg -i 480p.jpg -vf format=yuv420p,dnn_processing=dnn_backend=tensorflow:model=espcn.pb:input=x:output=y -y tmp.espcn.jpg
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Reviewed-by: Pedro Arthur <bygrandao@gmail.com>
Only the Y channel is handled by dnn, the UV channels are copied
without changes.
The command to use srcnn.pb (see vf_sr) looks like:
./ffmpeg -i 480p.jpg -vf format=yuv420p,scale=w=iw*2:h=ih*2,dnn_processing=dnn_backend=tensorflow:model=srcnn.pb:input=x:output=y -y srcnn.jpg
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Reviewed-by: Pedro Arthur <bygrandao@gmail.com>
Supports connecting to a RabbitMQ broker via AMQP version 0-9-1.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
rw_timeout is the generic URLcontext option, not the protocol specific timeout
option, also ?rw_timeout never worked because ?timeout was parsed instead.
Signed-off-by: Marton Balint <cus@passwd.hu>
This adds a decoder for Broderbund's sprite-based QuickTime CDToons
codec, based on the decoder I wrote for ScummVM.
Signed-off-by: Alyssa Milburn <amilburn@zall.org>
Required minimal changes to the code so made sense to implement.
FFT and MDCT tested, the output of both was properly rounded.
Fun fact: the non-power-of-two fixed-point FFT and MDCT are the fastest ever
non-power-of-two fixed-point FFT and MDCT written.
This can replace the power of two integer MDCTs in aac and ac3 if the
MIPS optimizations are ported across.
Unfortunately the ac3 encoder uses a 16-bit fixed point forward transform,
unlike the encoder which uses a 32bit inverse transform, so some modifications
might be required there.
The 3-point FFT is somewhat less accurate than it otherwise could be,
having minor rounding errors with bigger transforms. However, this
could be improved later, and the way its currently written is the way one
would write assembly for it.
Similar rounding errors can also be found throughout the power of two FFTs
as well, though those are more difficult to correct.
Despite this, the integer transforms are more than accurate enough.
Compared to ad-hoc if(printed) ... code this allows the user to disable
it by adjusting the log level
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In order for rate control to correctly allocate bitrate to each temporal
layer, correct temporal layer id has to be set to each frame. This
commit provides the ability to set correct temporal layer id for each
frame.
Signed-off-by: James Zern <jzern@google.com>
As we find ourselves wanting a way to transfer frames between
HW devices (or more realistically, between APIs on the same device),
it's desirable to have a way to describe the relationship. While
we could imagine introducing a `hwtransfer` filter, there is
almost no difference from `hwupload`. The main new feature we need
is a way to specify the target device. Having a single device
for the filter chain is obviously insufficient if we're dealing
with two devices.
So let's add a way to specify the upload target device, and if none
is specified, continue with the existing behaviour.
We must also correctly preserve the sw_format on such a transfer.
This commit adds the necessary code to initialize and use a Vulkan device
within the hwcontext libavutil framework.
Currently direct mapping to VAAPI and DRM frames is functional, and
transfers to CUDA and native frames are supported.
Lets hope the future Vulkan video decode extension fits well within this
framework.
Previously, the default palette would always be used.
Now, we can accept a custom palette, just like dvdsubdec does.
Signed-off-by: Michael Kuron <michael.kuron@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This changes the separator character from comma to colon, but since this option
was only added recently I think it should be done for consistency with other
similar options.
Signed-off-by: Marton Balint <cus@passwd.hu>
This commit reuses the configuration options for VP8 that enables
temporal scalability for VP9. It also adds a way to enable three
preset temporal structures (refer to the documentation for more
detail) that can be used in offline encoding.
Signed-off-by: James Zern <jzern@google.com>
There was no consensus about separating AVExprState from AVExpr so here is a
minimal patch using the existing AVExpr to fix ticket #7528.
Signed-off-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Suggested-by: Hendrik Leppkes <h.leppkes@gmail.com>
Suggested-by: Nicolas George <george@nsup.org>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Adds support for the ADPCM variant used by some Argonaut Games' games,
such as 'Croc! Legend of the Gobbos', and 'Croc 2'.
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
It is a common mistake that people only increase fifo_size when they experience
drops, unfortunately this does not help for higher bitrate (> 100 Mbps) streams
when the reader thread simply might not receive the packets in time (especially
under high CPU load) if the default 64 KB of kernel buffer size is used.
New default is determined so that common linux systems can set this buffer size
without tuning kernel parameters.
Signed-off-by: Marton Balint <cus@passwd.hu>
it's stranage to use option "level" in runtime change path but used
"quality" in option, add "quality" in runtime change path, it's more
intuitive and keep the "level" for compatibility.
Reviewe-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
libavformat/img2.h: New field export_path_metadata to
VideoDemuxData to only allow the use of the extra metadata
upon explicit user request, for security reasons.
libavformat/img2dec.c: Modify image2 demuxer to make available
two special metadata entries called lavf.image2dec.source_path
and lavf.image2dec.source_basename, which represents, respectively,
the complete path to the source image for the current frame and
the basename i.e. the file name related to the current frame.
These can then be used by filters like drawtext and others. The
metadata fields will only be available when explicitly enabled
with image2 option -export_path_metadata 1.
doc/demuxers.texi: Documented the new metadata fields available
for image2 and how to use them.
doc/filters.texi: Added an example on how to use the new metadata
fields with drawtext filter, in order to plot the input file path
to each output frame.
Usage example:
ffmpeg -f image2 -export_path_metadata 1 -pattern_type glob
-framerate 18 -i '/path/to/input/files/*.jpg'
-filter_complex drawtext="fontsize=40:fontcolor=white:
fontfile=FreeSans.ttf:borderw=2:bordercolor=black:
text='%{metadata\:lavf.image2dec.source_basename\:NA}':x=5:y=50"
output.avi
Fixes#2874.
Signed-off-by: Alexandre Heitor Schmidt <alexandre.schmidt@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The following is a python script to halve the value of the gray
image. It demos how to setup and execute dnn model with python+tensorflow.
It also generates .pb file which will be used by ffmpeg.
import tensorflow as tf
import numpy as np
from skimage import color
from skimage import io
in_img = io.imread('input.jpg')
in_img = color.rgb2gray(in_img)
io.imsave('ori_gray.jpg', np.squeeze(in_img))
in_data = np.expand_dims(in_img, axis=0)
in_data = np.expand_dims(in_data, axis=3)
filter_data = np.array([0.5]).reshape(1,1,1,1).astype(np.float32)
filter = tf.Variable(filter_data)
x = tf.placeholder(tf.float32, shape=[1, None, None, 1], name='dnn_in')
y = tf.nn.conv2d(x, filter, strides=[1, 1, 1, 1], padding='VALID', name='dnn_out')
sess=tf.Session()
sess.run(tf.global_variables_initializer())
graph_def = tf.graph_util.convert_variables_to_constants(sess, sess.graph_def, ['dnn_out'])
tf.train.write_graph(graph_def, '.', 'halve_gray_float.pb', as_text=False)
print("halve_gray_float.pb generated, please use \
path_to_ffmpeg/tools/python/convert.py to generate halve_gray_float.model\n")
output = sess.run(y, feed_dict={x: in_data})
output = output * 255.0
output = output.astype(np.uint8)
io.imsave("out.jpg", np.squeeze(output))
To do the same thing with ffmpeg:
- generate halve_gray_float.pb with the above script
- generate halve_gray_float.model with tools/python/convert.py
- try with following commands
./ffmpeg -i input.jpg -vf format=grayf32,dnn_processing=model=halve_gray_float.model:input=dnn_in:output=dnn_out:dnn_backend=native out.native.png
./ffmpeg -i input.jpg -vf format=grayf32,dnn_processing=model=halve_gray_float.pb:input=dnn_in:output=dnn_out:dnn_backend=tensorflow out.tf.png
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Signed-off-by: Pedro Arthur <bygrandao@gmail.com>
do not request AVFrame's format in vf_ddn_processing with 'fmt',
but to add another filter for the format.
command examples:
./ffmpeg -i input.jpg -vf format=bgr24,dnn_processing=model=halve_first_channel.model:input=dnn_in:output=dnn_out:dnn_backend=native -y out.native.png
./ffmpeg -i input.jpg -vf format=rgb24,dnn_processing=model=halve_first_channel.model:input=dnn_in:output=dnn_out:dnn_backend=native -y out.native.png
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Signed-off-by: Pedro Arthur <bygrandao@gmail.com>
In order to access the original opaque parameter of a buffer in the buffer
pool. (The buffer pool implementation overrides the normal opaque parameter but
also saves it so it is accessible).
v2: add assertion check before dereferencing the BufferPoolEntry.
Signed-off-by: Marton Balint <cus@passwd.hu>
ts_target_bitrate is in kbps, not bps. This commit clarifies the unit
and modifies the example to match the description.
Signed-off-by: James Zern <jzern@google.com>
